Sitemap | Instron

Produkte

Prüfsysteme

Zubehör für die Prüftechnik

Crash Simulation Zubehör;
- 2-Piece Sled;
- Kameraträger;
- Heckaufprall Simulation;
- Pitch Simulation;
- Paletten Schnellwechselsystem;
- Seiten- und Pfahlaufprall Simulation;
Klimakammern und Öfen;
- Klimakammern;
  - Electropuls Pull Rod Kit 3117-082;
- Custom Thermal Testing;
- Furnaces;
  - Furnace Testing;
  - Furnace Testing;
    - 1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing;
Spannzeuge;
- Compact Tension Fixtures for Fracture Mechanics;
  - Additional Extension Rod 2780-120;
  - Compact Tension Fixtures for 12.5mm Thick Compact Tension Specimens;
  - Compact Tension Fixtures for 25 mm Thick Compact Tension Specimens ;
  - Compact Tension Fixtures for 50mm Wide Compact Tension Specimens ;
- Pneumatic/Hydraulic Power Supplies;
  - Air Compressor, Portable; Line Voltage: 240 VAC;
- Mechanical - Wedge Grips;
  - 2742-102 - ±1 kN Mechanical Fatigue Grips;
  - 2742-206;
  - 2742-316;
  - 2743-402;
- Erweiterte hydraulische Keilspannzeuge;
  - Fatigue Rated Hydraulic Wedge Grips (+/- 500 kN);
- Mechanical Wedge Lever Action Grips;
  - 150 kN Lever Action Mechanical Wedge Grips;
  - Lever Action, Mechanical Wedge Grips; Capacity: 100 kN;
  - Lever Action, Mechanical Wedge Grips; Capacity: 150 kN;
- Elasticated Fabric;
  - Fabric Loop Grips;
- O Ring Fixtures;
- Hydraulic Wedge Action Grips;
  - Hydraulic Wedge Action Grips 300kN (67,500 lbf);
  - Hydraulic Wedge Action Grips 600kN (135,000 lbf);
  - Hydraulic Wedge Action Grips 1500kN (337,500 lbf);
  - Hydraulic Wedge Action Grips 1000 kN (225,000 lbf);
  - Hydraulic Wedge Action Grips 2000kN (450,000 lbf);
- Pneumatic Wedge Grips;
  - 2742-103 | ±1 kN Pneumatic Fatigue-Rated Wedge Action Grips;
  - 2742-205;
  - 2742-315 ±10 kN ±100 Nm Pneumatic Fatigue Grips;
- Selbstspannende Spannzeuge mit exzentrischer Rolle;
- Cord Capstan Tensile Grips;
- Fiber Filament Tensile Grips;
- Hydraulisch seitlich wirkende Zugspannzeuge;
- Mechanisches Keilspannzeug;
- Mikroelektronik-Zugspannzeuge;
  - Micro Pneumatic Grips, Side Action. Rated capacity: 10 N ;
  - Pneumatic Lead Pull Grip. Rated capacity: 500 N ;
- O-Ring Test Fixtures;
- Pneumatische Schnur- und Garn-Spannzeuge;
  - High Temperature Pneumatic Cord and Yarn Grips;
- Seitlich wirkende pneumatische Spannzeuge;
- Seitlich wirkende Schraubspannzeuge;
- TEMP Wire and Cable Tensile Grips;
- Threaded-End and Button-End Grip Bodies and Inserts;
- Webbing Capstan Tensile Grips;
- Pneumatic Wedge Action Grips;
  - Pneumatic Wedge Action Grips; Capacity: 100 kN;
  - Pneumatic Wedge Action Grips; Capacity: 200 kN;
- Torsion and Axial-Torsion Grips;
  - Axial-Torsion Wedge Grips;
    - 25kN / 100Nm Fatigue Rated Hydraulic Wedge Action Grips for 8874 Machine;
  - Chuck Style;
    - 0.375 in Keyless Drill-Type Chuck Assembly;
    - 0.375 in Keyed Drill-Type Chuck Assembly;
  - Collet Style;
    - Small Collet Grip Assembly, Range 0.8 - 6.3 mm (0.03125 - 0.25 in);
    - Large Collet Grip Assembly, Range 6.3 - 14.25 mm (0.25 in - 0.5625 in) ;
  - Socket Style;
    - 0.5 in Socket Drive Torsion Grips, English;
    - 0.5 in Socket Drive Torsion Grips, Metric;
- Wire and Cable;
  - Pneumatic Wire Tire Cord Grips;
  - Pneumatic Cord and Yarn Grips. Grooved, 5 kN;
  - Pneumatic Wire Tire Cord Grips. Surfalloy, 5 kN;
  - Pneumatic Wire Tire Cord Grips (10 kN);
  - SG-1 Wire Snubbing Grips;
  - SG-2 Cable Snubbing Grips;
  - Pneumatic Action Tire Cord Grips. 10 kN;
Kraftaufnehmer;
- Statische Kraftaufnehmer;
- Torsion Cells;
- Dynamic Fatigue;
  - 2527 Series Bi-axial Dynacell;
  - 2527 Series Dynacell;
Frame Accessories;
- Electromechanical Frame Accessories;
  - Ethernet Frame Interface;
  - Digital Controller Accessories;
- 8800 Series Servohydraulic Test Systems;
- Air Kits für Pneumatische Spannzeuge;
  - Intelligente Druckluftsteuerung;
- Debris Shields;
- Electropuls All-Electric Dynamic Test Systems ;
- Impact Testing System Accessories;
- Loadframe Support Tables/Bases;
  - Support Table, Heavy Duty; For use with all Dual Column Table Top Models;
  - Base/Extension for Floor Models 4400, 5800 and 5900;
- Static Hydraulic Universal Testing System Frame Accessories;
  - In-Head Wedge Grip Jaws;
  - T-Slotted Tables;
- Hydraulic Grip Pump;
Messen und Vorbereiten von Proben;
- Specimen Preparation Systems;
  - Specimen Preparation Notching Machines;
  - Specimen Preparation Punching Machines;
- Specimen Marking Punches;
- Specimen Measurement Devices;
Alignment Fixtures;
Application Specific Fixtures;
- Food;
- Paper and board;
  - TAPPI T541 Internal Bond Strength of Paperboard. Z-Direction Tensile.;
- Wood;
Zubehör für Tests von Elektrofahrzeugbatterien;
Biomedizinische Systeme und Zubehör;
Prüfgeräte für Verbundwerkstoffe;
- Composite Tensile Grip Guide;
Druckplatten;
- Self-Aligning / Spherically Seated Compression Platens;
Kupplungen und Adapter;
Custom Accessories;
- Custom Fixtures;
- Grips & Platens;
Electronics and Microelectronics Testing Systems and Accessories;
- Miniature Variable Angle Peel Fixture;
- Stepped Jaw Vice Clamp, Capacity: 500 N (100 lb, 50 kgf);
- Translation and Clamping Stages;
Extensometer für die Werkstoffprüfung;
- Averaging Clip-on Extensometer;
  - Averaging Extensometer;
  - Averaging Extensometer;
- Axial Clip-on;
  - Dynamic;
- AutoX750 Automatisches Extensometer;
- Biaxial Clip-on;
- Calibrators for Extensometers;
  - Extensometer Digital Calibrator 0.1 micron resolution;
  - Extensometer Digital Calibrator 1.0 micron resolution;
- Compression Deflectometers (LVDT);
- Crack Opening Displacement (COD) gauges;
  - Crack Opening Displacement (COD) Gauge 5/2;
  - Crack Opening Displacement (COD) Gauge 10/4;
- High-Temperature Extensometers;
- Long Travel Extensometer;
- Berührungsloses Video-Extensometer AVE 2;
  - AVE 2 Dynamic | Low Force Applications;
  - AVE 2 Dynamic | High Force Applications;
- Statisches axiales Aufsteck-Extensometer;
- Transverse Clip-on Extensometers;
Spannvorrichtungen für Befestigungsmittel;
- Halterungen für Befestigungselemente;
- Scherenvorrichtungen für Befestigungsmittel;
Biegevorrichtungen;
- 3 and 4 Point Fatigue Flexure Fixtures;
- Dreipunkt-Biegetestvorrichtungen;
  - Guided-Bend/Weld Bend Test Fixture; specimen width to 76 mm (3.0 in) ;
  - Cold Bend Testing Fixture for Steel Reinforcement Bar;
Schäl-, Reibungs- und Durchstich-Prüfungsvorrichtungen;
- Puncture Test for Packaging Materials ;
- Puncture Fixture per ASTM D5748, D4649;
Testplatten;
- Komponenten-Testplatte;
- T-Nut-Tische;
Instron-Katalog – Zubehör für die Materialprüfung, achte Auflage;
- Request a Catalog;

Prüfsoftware

Service and Support

Professionelle Dienstleistungen von Instron

Schulung

Häufig gestellte Fragen ;

Ressourcen

Testlösungen

ASTM

ISO

Sonstige

Branchenlösungen

Aerospace

Automotive

Biomedizinische Tests

Tests an Verbundwerkstoffen

Frequently Asked Questions;

Construction and Building Materials Testing

Batterie Prüfungen

Electronics and Microelectronics

Tests an Metallen

Materialien

Prüfung von Kunststoffen

Ressourcen

Blog

Fallstudien

Glossar der Materialprüftechnik

Wie man

Literatur

Nachricht

Outsourcing-Rechner

Testtypen

Videos

Webinare

Unser Unternehmen

Unser Unternehmen

Karriere

Field Service Representative Opening in Greater Toronto, ON;

Kontakt mit uns

Newsletter abonnieren;

terug
naar boven