ISO 14130 Determination of Apparent Interlaminar Shear Strength by Short-Beam Method
The ISO 14130 test method covers the determination of the apparent interlaminar shear strength (ILSS) of fiber-reinforced plastic composites by the short-beam method. The method is suitable for composites with either a thermoset or thermoplastic matrix. The data obtained is not suitable for determining the design parameters, but it can be used for screening materials or for quality control. So with the various test samples there will also be variation on the failure mode, which is dependent on the fiber lay-up procedures used during manufacturing.
Our CP106682 shear fixture consists of a bar of rectangular cross section with two supports which the sample is placed with the loading member midway between the supports. The fixure incorporates a guided upper anvil to ensure parallel loading of the specimen. This test procedure has a smaller test span and the specimen thickness ratio is adopted to increase the level of shear stress relative to the flexural stress in the test specimen to encourage interlaminar shear failure.
We recommend testing with either the 3300 or 5900 Universal Testing Instruments with our dedicated Bluehill® 3 Software modules for this application, as it can easily be configured with any of the other common composite test applications, such as tensile, flexural, and compression.
We recommend reviewing the ISO 14130 in full to understand the test fixture and results requirements relevant to the materials you are testing.
5900 Universal Testing Systems are engineered for precision, built for durability, and offer the flexibility for changing requirements. They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator. A wide range of models are available for testing capacities from < 100N up to 600kN.
- 6.8 MB
Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.
- 2.6 MB
The 3340 Series single column tabletop testing systems perform tensile, compression, peel, and bend tests on products and materials such as medical devices, biomaterials, elastomers, plastics, film and textiles
- 0.7 MB
Interlaminar shear testing is a simple test on, easy to prepare, polymer composite specimens that gives a measure of the strength of the bond between fibers and matrix. Another common test for polymer composites is flexure testing. The Instron® Modular Flexural and Interlaminar Shear Strength (ILSS) bend fixture system, with a range of interchangeable anvils, is suitable for testing to a number of international standards, including ASTM D2344, D790, EN 2562, EN 2563, ISO 14125, and ISO 14130.
- 509.4 KB