tack and peel testing fixtures 

Electrode Anode Testing for Electric Vehicle Batteries


ev battery icon  

There are multiple ways in which batteries can fail. One of the most common modes of failure is caused by the electrode coating material cracking or delaminating from the current collector. This cracking or delaminating is typically caused by the constant charging and discharging of the battery as well as by mechanical loading of the battery in use. It is critical to understand the adhesion strength and longevity of electrodes to ensure that a battery does not fail before the end of its predicted life cycle.

As battery manufacturers work to understand the adhesive properties of their cathode and anode materials, many are also introducing new electrode makeups in an effort to increase the safety and energy density of batteries. Most of these changes are to the anode material with additions such as silicone, which requires further testing and analysis. It is critical to understand how electrode adhesion is influenced by different binders and elements. The three types of testing most commonly used to characterize the adhesive properties and monitor production material for electrodes are 90° peel tests, 180° peel tests, and tack tests.

 

180° Peel Test

The most commonly performed peel tests are 90° and 180° peel tests. 180° testing has an advantage over 90° testing in simplicity of setup and ease of alignment. This testing can be done using low force grips and load cells along with a substrate that helps the flexible material maintain proper alignment during testing. It is best to consider pneumatic grips and a metal substrate to ensure high throughput and a proper 180° peel throughout each test.

electrode test 

90° Peel Test

 

 

90° peel testing is commonly seen as an alternative to 180° degree peel testing. The 90° peel test generally involves slightly higher loads than the 180° peel test and can be set up more quickly because it often does not require a substrate. Instron’s most common solutions for this testing are a standard 90° peel fixture or a pneumatic peel fixture designed specifically to test the adhesion of electrodes. The pneumatic 90° peel fixture was developed specifically for electrode adhesion testing and provides improved repeatability and throughput while also aiding the operator in consistent specimen placement and alignment at 90°. For the upper fixture, a pneumatic grip optimizes throughput and repeatability and is recommended for testing delicate materials.

A tack test is an electrode adhesion test that has been backed by researchers as an additional way to test the adhesion of electrodes to a battery's current collector. Instead of slowly peeling electrodes from the current collector, a tack test focuses on the adhesion strength of an entire predetermined area of electrodes, allowing for quicker evaluation of electrode adhesion over a large area. Instron’s tack testing fixture is designed for ease of specimen preparation as well as high throughput and repeatability. It features predetermined contact areas in addition to a spherically seated and lockable upper fixture, which ensures parallelism between both fixtures. Due to the fast speeds of this testing, a testing system with a very high data rate collection will ensure the best possible results and throughput.

 

 

Related Content
EV White Paper

Mechanical Testing of Electric Vehicle Batteries White Paper

Static mechanical testing is key to assessing the safety and reliability of electric vehicles (EVs). Soaring EV sales combined with ever-changing battery technology are leading to an expanding range of components and materials that require thorough testing. This white paper examines the key static mechanical testing methods and technologies associated with EV battery applications.

EV E-Guide

How to Choose the Right Test Machine for You EV Battery Application

Mechanical testing is key to assessing the performance and safety of an electric vehicle’s (EV) battery system. Accurate, efficient, and safe testing equipment is critical for companies trying to increase productivity and decrease time-to-market in this competitive new industry. The e-guide will walk you through three key steps to selecting the most appropriate test equipment for EV battery applications.

6800 Series Premier Testing Systems Brochure

Instron 6800 Series Universal Testing Systems provide unparalleled accuracy and reliability. Built on a patent-pending Operator Protect system architecture with an all-new Smart-Close Air Kit and Collision Mitigation features, the 6800 Series makes materials testing simpler, smarter, and safer than ever before.

3400 Series - Affordable Testing Solutions

Instron 3400 Series Universal Testing Systems for Tensile, Compression, Bend, and other material property tests.

Bluehill Universal Brochure

Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.

2712-04X Series Pneumatic Side-Action Grips

Pneumatic side-action grips offer a versatile gripping solution for a wide range of materials. Rated capacities between 1 and 10 kN.

Contact Us

Please complete the form below and we will be happy to contact you with a response. Our typical response time for an online request is within 1-2 business days. For a faster response, please call us at either of the below numbers.

SERVICE REQUEST

For service related questions, please fill out the contact form by clicking the button below.

Please enter your email address. Email addresses must contain the @ symbol. Email addresses can only contain letters, numbers and the following special characters: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~ Email address domains can only contain letters, numbers, dots (.) and hyphens (-).
Please enter your message. Email addresses can only contain letters, numbers and the following special characters: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~
Next Checking to see if you are a returning visitor…

Welcome back!

Your Contact Information

Please enter your first name.
Please enter your last name.
Please select your country.
Please enter your company.
Please enter your address.
Please enter your address line 2.
Please enter your address line 3.
Please enter your county.
Please enter your city.
Please select your state/province.
Please enter your ZIP/Postal Code.
Please enter your telephone number.

Please confirm that you agree with our privacy and cookies policy to submit this form.

I agree to the terms & conditions of Instron's Privacy and Cookies Policy
Please choose a subscription option One or more required fields are empty, complete the form to continue. One or more fields contain formatting errors, fix the errors to continue. You must agree to Instron's Privacy Policy in order to continue.