W-5159 | Tensile Holders for Shoulder-End and Button-head Specimens, 600kN
One set of 600kN Split Sleeve Insert Holders for tensile testing of shoulder-end and button-head specimens, prepared to the Instron standard specimen machining diagram
This set of insert holders requires at least one set of inserts to perform a test. Choose from W-5159-* selections that follow.
Static Capacity: 600kN (135,000 lbf)
Frame attachment: M48x2p RHf (Type II RH)
Effective Length: 127mm (5.0 inch)
Configuration requirements:
- At minimum one set of inserts is required for use with the insert holder to test
- Customer must confirm specimen dimensions with Instron Standard specimen drawing
- Any non-standard specimens will require a set of W-5159-X custom inserts
- To install the tensile holders onto the load frame, a set of tension alignment adapters is required