Compression Bridge Assembly - W-2590-G
Compression Bridge Assembly for use on 600HVL and 600XWHVL universal testing machines to permit the mounting of compression test fixtures without the removal of the tensile grips and fixtures.
Note: The use of a compression bridge will reduce the available compression opening of the testing machine unless additional tension and compression space is purchased.
- Permanently installed to motorized crosshead, bridge removal not required for tensile testing
- Bridge design incorporates a Type R2f receiver for connection of compression accessories equipped with the Type R2m ball hitch connection.
- Effective height: 368mm (25 in)
- Nominal weight: 360 kg (800 lb)
|Accessory Depth||305 mm (12 in)|
|Accessory Height||635 mm (25.0 in)|
|Accessory Width||610 mm (24 in)|
|Compatible Frame Models||5598, 600HVL|
|Pressure Rating||690 MPa (100,000 psi)|
|Upper Fitting||0.53 inch Through Hole|