ASTM D5766 Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

ASTM D5766 open-hole tensile strength of polymer matrix composite laminates

ASTM D5766 determines the open-hole tensile strength of multidirectional composite coupons. The composite coupon geometry has to be in accordance with test method ASTM D3039. ASTM D5766 is designed to produce tensile results on multidirectional polymer matrix composite laminates mainly used in the aerospace industry for material specifications, research and development, quality assurance, and structural design and analysis.

Materials Testing System

Because the forces required for ASTM D5766 testing are relatively high, a floor model universal testing system such as Instron's 5980 Series is recommended. The properties of composite materials are highly directional, making it especially necessary to test with a system that is well-aligned and repeatable. An AlignPRO fixture and precision manual or hydraulic wedge grips are necessary in order to test specimens within alignment requirements and without slippage.




ASTM D5766 Test Setup
1) 5980 Series Universal Testing System
2) Bluehill Universal Software
3) AlignPRO Fixture
4) 2580 Series Load Cell
4) 2716-030 Precision Manual Wedge Grips

 

ASTM D5766 system setup

Testing Tips and Tricks

  • This testing is performed in accordance with ASTM D3039, but instead of a uniform coupon, the specimen is modified with a centrally-located hole. When calculating the ultimate tensile strength based on the cross sectional area, the hole's presence is disregarded.
  • ASTM D5766 requires that the specimen coupon have multidirectional fiber orientations in a minimum of two directions. Typical test results include the ultimate tensile strength, the width of specimen-to-hole diameter ratio, hole-diameter-to-coupon-thickness ratio, and, if desired, the edgewise percent bending in accordance with ASTM D3039.
  • The only valid failure mode in determining the ultimate tensile strength is one that passes through the prefabricated hole in the test coupon. A break outside of this location does not deliver valid test results.

Related Content

Composites Testing Brochure

Instron’s universal testing machines are designed to perform the most common types of testing used in the composites industry, including but not limited to in-plane tensile, through thickness tensile, interlaminar shear, compression in end, shear, or combined loading, and compression after impact.

High Force Universal Testing Machines Brochure

Instron's high force systems include electromechanical and high-capacity hydraulic testing systems for tension and compression applications. Force capacities range from 100 kN to 2000kN.

AlignPRO Alignment System

Instron's AlignPROTM system is designed to assist machine operators when measuring and adjusting load string alignment.

5980 Series Dual Column Floor Model

5980 floor models are robust, heavy-duty frames commonly used for testing high-strength metals and alloys, advanced composites, aerospace and automotive structures, bolts, fasteners, and plate steels.

2743-401 Hydraulic Wedge Grips

Instron's 100 kN hydraulic wedge grips provide an innovative solution for high-capacity testing and delivery enhanced gripping performance, usability, and operator safety. 

2716 Precision Manual Wedge Grips

Available in 100 and 250 kN capacities, Instron's 2716-028/30 precision manual wedge grips provide reliable gripping for a wide range of materials as well as repeatable alignment that meets Nadcap requirements.