EN 2597 Carbon Fiber Reinforced Plastics. Unidirectional Laminates. Tensile Test Perpendicular to the Fiber Direction.
Standard At A Glance
- EN 2597
EN 2597:1998 is a testing standard that specifies the method of determination of the ultimate tensile strength, tensile modulus, Poisson’s ratio, and strain at failure in tension of carbon fiber reinforced plastics in the form of unidirectional laminates. EN 2598 is used for product development and quality control by a range of manufacturers who use carbon fiber laminates, including the aerospace, automotive, wind energy, and construction industries. This method is only applicable to specimens where the axis is perpendicular to the direction of the fibers. Testing when the axis is parallel to the fiber direction calls for the use of EN 2561.
Materials Testing System
The strength of composite specimens with fibers oriented perpendicular to the loading direction (axis) are normally much lower than the strengths of specimens where the fibers are oriented in the loading direction. Hence, the test forces are much lower. However, since testing to EN 2597 is normally combined with a range of other, higher force tests on composite materials, an electromechanical floor model testing machine such as Instron's 5980 Series will be the most suitable solution. The large (1000:1) force measurement range of the 5980 means that both high and low force tests can be carried out without the need to change load cells. A table model electromechanical machine may have sufficient capacity for testing lower strength materials, such as glass fiber.
|EN 2597 Test Setup|
|1)||5900 Series Universal Testing System
|2)||Bluehill Universal Software
|3)||2580 Series Load Cell
|4)||2742 Series Hydraulic Wedge Grips
|5)||AVE2 Non-Contacting Extensometer
|EN 2597 Testing Accessories|
|2)||Biaxial Clip-On Extensometer
Strain measurement devices include strain gauges and extensometers. Strain gauges can be connected to the testing machine via easy-to-use strain gauge adapters. A range of suitable contacting extensometers for axial and bi-axial strain measurements are available. When strain at failure is required, a non-contacting strain measurement solution such as Instron's AVE2 is preferred. When tests need to be conducted at high or low temperatures, a temperature chamber along with grips capable of operation inside the chamber are required.
Testing Tips and Tricks
- Obtaining consistent results when testing composites requires accurate alignment of the test specimen. Instron testing frames and accessories provide excellent alignment.
- Bluehill Universal software comes provided with one free applications module upon purchase. The composites module includes a pre-defined EN 2597 test method.
- To read the test method in full, purchase EN 2597:1998
5980 floor models are robust, heavy-duty frames commonly used for testing high-strength metals and alloys, advanced composites, aerospace and automotive structures, bolts, fasteners, and plate steels.
Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.
The second generation Advanced Video Extensometer (AVE 2) utilizes patented measurement technology in the fastest, most accurate non-contacting strain measurement device commercially available.
The 2630-100 series of extensometers offers speed of attachment and ease-of-use. The light-weight, rugged cross-brace design eliminates errors caused by physical distortion, while built-in protection ensures that damage is not caused by over-extension.
Instron's Bi-axial and Averaging Axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminium, titanium, and stainless steel.
From aerospace to construction, strain gauges are used in a variety of industries to measure strain in both materials and structural testing. These strain gauge adapters allow a single strain gauge to be used with any standard Instron strain channel.