Literature

Literature Library for Brochures, Manuals, White Papers, & Case Studies

100 kN Flexure Fixture Data Sheet

The flexure fixture (catalog no. 2810-182) allows a variety of flexural and fracture toughness bond tests to be performed, including determination of flexural modulus, flexural strength and flexural yield strength.

Download

Products 5/9/2022 0.5 MB

2580 Series Static Load Cells Data Sheet

The 2580 Series load cells are specifically designed for use with 6800 and 5900 testing systems; offering exceptional performance with the ability to measure forces as low as 1/1000th of the force capacity to an accuracy of 0.5% of reading.

Download

Products 5/9/2022 0.6 MB

2712-04x Series Pneumatic Side Action Grips Data Sheet

The 2712-04x Series pneumatic side action grips are ideal for static tensile testing on a wide range of materials and specimen types including plastics, elastomers, metals, textiles, paper, thin sheet, foil, and wire.

Download

Products 3/22/2022 1.1 MB

Pneumatic Side-Action Grips | 2712-05x Series

The Instron 2712-05x Series Pneumatic Side-Action Grips offers a versatile gripping solution for a wide range of materials. Available in both 50 and 250 N options, the grip’s robust design is ideal for round (wires),fiber (mono-filaments), and flat specimens with or without shoulder.

Download

Products 3/22/2022 1.9 MB

Curved Needle Testing Systems

The Instron® Needle Testing System is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal benchtop space. The testing system operates with Instron Bluehill® 3 Software that provides test control, data acquisition,test results, and reports, as well as a large library of calculations.

Download

Products 3/18/2022 493.7 KB

Manual Wedge Action Grips 2716-00x and 2736-00x Series

The manual wedge action grip is designed for easy specimen loading, alignment, and positioning. After initial face to specimen contact, gripping force will increase as the testing load increases. Virtually no preload is seen during specimen clamping due to the design of the moving grip bodies. This makes them particularly suitable for testing high strength materials, such as metals and composites, ensuring that specimen slippage is eliminated.

Download

Products 3/8/2022 1.0 MB

6800 Series Multi Station Systems

The Instron 6800 Series Multi Station System offers enhanced throughput with its ability to perform simultaneous, independent tests on up to five separate specimens using a single load frame.

Download

Products 2/18/2022 0.8 MB

AVE2 Dynamic Strain Measurement

In addition to its excellent performance for static testing, the Instron AVE 2 is now available with an option for cyclic testing and high speed monotonic test measurement. Capable of tracking displacement at up to 500mm/s with cyclic test frequencies up to 20Hz, it offers the speed and flexibility scientists and engineers have been waiting for to study the dynamic behaviour of materials without contacting the specimen.

Download

Products 2/10/2022 2.7 MB

V-Notch Shear Fixtures | ASTM D5379 & D7078

Instron® Shear Test Fixtures are designed for in-plane or interlaminar shear testing of composite materials. The V-Notched Beam Method, more commonly known as the Iosipescu Shear Method, is described in ASTM D5379, while the V-Notched Rail Shear Method is outlined in ASTM D7078. Both test methods share many common characteristics and have the distinctive V-notches in the specimen design, which serve to create a localized and approximate uniform shear stress zone between the notches. Also, a ±45° two-element strain gauge is often used to directly verify the shear strains applied.

Download

Products 2/1/2022 0.5 MB

2713 Series Self-Tightening Roller Grips

The self-tightening roller grips are primarily designed for the precision testing of elastomeric and other flexible materials exhibiting a large reduction in cross-section area under load. They provide excellent testing accuracy, positive non-slip gripping action, and are quick and simple to use.

Download

Products 2/1/2022 196.0 KB