BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Instron - ECPv6.16.4.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Instron
X-ORIGINAL-URL:https://www.instron.com/en/
X-WR-CALDESC:Events for Instron
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20260308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20261101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20270314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20271107T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260713T090000
DTEND;TZID=America/New_York:20260713T160000
DTSTAMP:20260612T131853Z
CREATED:20260513T193302Z
LAST-MODIFIED:20260612T131853Z
UID:10000003-1783933200-1783958400@www.instron.com
SUMMARY:Introduction to Static Materials Testing
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/en/event/introduction-to-static-materials-testing-3/
LOCATION:Virtual
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2020/10/free-training-homepage-news.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260713T100000
DTEND;TZID=America/New_York:20260713T110000
DTSTAMP:20260616T155253Z
CREATED:20260616T155253Z
LAST-MODIFIED:20260616T155253Z
UID:10000135-1783936800-1783940400@www.instron.com
SUMMARY:Designing for Durability: Fatigue Performance of Additive Manufacturing Components in Industry
DESCRIPTION:Additive manufacturing (AM) is rapidly moving into functional industrial applications. Explore the impact in aerospace\, automotive\, and biomedical industries. \nIn this session\, you will learn:\n•	Why Fatigue Is Especially Critical for Industry Application of Additively Manufactured Parts\n•	Impact of Process-Driven Variability on Fatigue Data\n•	How Instron Supports Fatigue Testing for Additively Manufactured Parts \nRegister Now
URL:https://www.instron.com/en/event/designing-for-durability-fatigue-performance-of-additive-manufacturing-components-in-industry/
LOCATION:Virtual
CATEGORIES:Webinars
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/directed-energy-deposition-metal-additive-manufacturing-process.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260714T090000
DTEND;TZID=America/New_York:20260714T163000
DTSTAMP:20260612T132343Z
CREATED:20260515T120936Z
LAST-MODIFIED:20260612T132343Z
UID:10000097-1784019600-1784046600@www.instron.com
SUMMARY:Bluehill® Universal Introduction to Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-introduction-to-test-method-development-07-14-2026/
LOCATION:Virtual
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/dogbone-with-course-materials.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260715T090000
DTEND;TZID=America/New_York:20260715T163000
DTSTAMP:20260615T143645Z
CREATED:20260513T194113Z
LAST-MODIFIED:20260615T143645Z
UID:10000034-1784106000-1784133000@www.instron.com
SUMMARY:Bluehill® Universal Advanced Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-advanced-test-method-development-4/
LOCATION:Virtual
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/high-wycombe-classroom-training.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260716T090000
DTEND;TZID=America/New_York:20260716T163000
DTSTAMP:20260612T132726Z
CREATED:20260515T120940Z
LAST-MODIFIED:20260612T132726Z
UID:10000098-1784192400-1784219400@www.instron.com
SUMMARY:Bluehill® Universal TestProfiler Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-testprofiler-method-development-07-16-2026/
LOCATION:Virtual
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2025/03/instron-training-hp.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260722T110000
DTEND;TZID=America/New_York:20260722T120000
DTSTAMP:20260618T180502Z
CREATED:20260618T180502Z
LAST-MODIFIED:20260618T180502Z
UID:10000678-1784718000-1784721600@www.instron.com
SUMMARY:Which extensometer is right for your application?
DESCRIPTION:Selecting the right extensometer is one of the most important decisions a materials testing lab can make\, yet the range of available options can be overwhelming. This webinar cuts through the complexity by walking participants through the full extensometer landscape\, from foundational classification systems to real-world application matching. Whether your lab is evaluating your current setup or considering new extensometer technologies\, this session will give you a practical framework for making confident\, application-driven decisions — along with insights from Covalent\, a Silicon Valley–based independent materials testing lab\, sharing their experience using the Instron AVE3 video extensometer while testing materials for their customers. \nTopics: \n\nWhat extensometers are\, why they’re required for accurate materials testing\, and how classification standards connect to your specific application requirements\nThe key differences between contacting extensometer types — including clip-ons\, long travel\, automatic contacting\, and strain gauges — and the scenarios where each excels\nHow non-contacting optical extensometers work and the advantages they offer in terms of accuracy\, specimen protection\, and workflow efficiency\nHow to evaluate extensometer options against your lab’s testing demands\, materials\, and throughput needs\nA customer perspective from Covalent on adopting video extensometry across a range of material applications\, including examples from thin films and foils in battery testing\, and the resulting gains in repeatability\, throughput\, and reduced operator variability\n\nRegister Now
URL:https://www.instron.com/en/event/which-extensometer-is-right-for-your-application/
LOCATION:Virtual
CATEGORIES:Webinars
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/06/instron-ave3-advanced-video-extensometer-used-for-full-field-strain-mapping.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260804T083000
DTEND;TZID=America/Los_Angeles:20260804T160000
DTSTAMP:20260612T143155Z
CREATED:20260513T193306Z
LAST-MODIFIED:20260612T143155Z
UID:10000005-1785832200-1785859200@www.instron.com
SUMMARY:Introduction to Static Materials Testing
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/en/event/introduction-to-static-materials-testing-5/
LOCATION:Portland\, OR\, Portland\, OR\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-instructor.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260805T083000
DTEND;TZID=America/Los_Angeles:20260805T160000
DTSTAMP:20260612T143335Z
CREATED:20260515T121006Z
LAST-MODIFIED:20260612T143335Z
UID:10000101-1785918600-1785945600@www.instron.com
SUMMARY:Bluehill® Universal Introduction to Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-introduction-to-test-method-development-08-05-2026/
LOCATION:Portland\, OR\, Portland\, OR\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2024/12/hwservicetraining-400x250-1.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260806T083000
DTEND;TZID=America/Los_Angeles:20260806T160000
DTSTAMP:20260612T143538Z
CREATED:20260514T192453Z
LAST-MODIFIED:20260612T143538Z
UID:10000051-1786005000-1786032000@www.instron.com
SUMMARY:Bluehill® Universal Advanced Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-advanced-test-method-development-08-06-2026/
LOCATION:Portland\, OR\, Portland\, OR\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-with-touchscreen-instructor-norwood-classroom.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260807T083000
DTEND;TZID=America/Los_Angeles:20260807T160000
DTSTAMP:20260612T143725Z
CREATED:20260515T121014Z
LAST-MODIFIED:20260612T143725Z
UID:10000103-1786091400-1786118400@www.instron.com
SUMMARY:Bluehill® Universal TestProfiler Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-testprofiler-method-development-08-07-2026/
LOCATION:Portland\, OR\, Portland\, OR\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-projector.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260825T080000
DTEND;TZID=America/New_York:20260825T163000
DTSTAMP:20260612T143925Z
CREATED:20260513T193311Z
LAST-MODIFIED:20260612T143925Z
UID:10000006-1787644800-1787675400@www.instron.com
SUMMARY:Introduction to Static Materials Testing
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/en/event/introduction-to-static-materials-testing-6/
LOCATION:Instron Corporate Headquarters\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2025/10/Training_Stock_1.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Instron Corporate Headquarters 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260826T080000
DTEND;TZID=America/New_York:20260826T163000
DTSTAMP:20260612T144012Z
CREATED:20260515T133034Z
LAST-MODIFIED:20260612T144012Z
UID:10000104-1787731200-1787761800@www.instron.com
SUMMARY:Bluehill® Universal Introduction to Test Method Development
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-introduction-to-test-method-development-08-26-2026/
LOCATION:Instron Corporate Headquarters\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2024/06/testprofiler-with-icon.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Instron Corporate Headquarters 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260827T080000
DTEND;TZID=America/New_York:20260827T163000
DTSTAMP:20260612T144245Z
CREATED:20260514T192454Z
LAST-MODIFIED:20260612T144245Z
UID:10000052-1787817600-1787848200@www.instron.com
SUMMARY:Bluehill® Universal Advanced Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-advanced-test-method-development-08-27-2026/
LOCATION:Instron Corporate Headquarters\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2025/10/Training_Stock_1.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Instron Corporate Headquarters 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260828T080000
DTEND;TZID=America/New_York:20260828T163000
DTSTAMP:20260612T144419Z
CREATED:20260515T133038Z
LAST-MODIFIED:20260612T144419Z
UID:10000106-1787904000-1787934600@www.instron.com
SUMMARY:Bluehill® Universal TestProfiler Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-testprofiler-method-development-08-28-2026/
LOCATION:Instron Corporate Headquarters\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/high-wycombe-classroom-with-instructor.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Instron Corporate Headquarters 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260915T083000
DTEND;TZID=America/Los_Angeles:20260915T160000
DTSTAMP:20260612T144554Z
CREATED:20260513T193313Z
LAST-MODIFIED:20260612T144554Z
UID:10000007-1789461000-1789488000@www.instron.com
SUMMARY:Introduction to Static Materials Testing
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/en/event/introduction-to-static-materials-testing-7/
LOCATION:Irvine\, CA\, Irvine\, CA\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-projector.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260916T083000
DTEND;TZID=America/Los_Angeles:20260916T160000
DTSTAMP:20260612T144814Z
CREATED:20260515T133039Z
LAST-MODIFIED:20260612T144814Z
UID:10000107-1789547400-1789574400@www.instron.com
SUMMARY:Bluehill® Universal Introduction to Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-introduction-to-test-method-development-09-16-2026/
LOCATION:Irvine\, CA\, Irvine\, CA\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-raising-hand-classroom-with-instructor.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260917T083000
DTEND;TZID=America/Los_Angeles:20260917T160000
DTSTAMP:20260612T144937Z
CREATED:20260514T192456Z
LAST-MODIFIED:20260612T144937Z
UID:10000053-1789633800-1789660800@www.instron.com
SUMMARY:Bluehill® Universal Advanced Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-advanced-test-method-development-09-17-2026/
LOCATION:Irvine\, CA\, Irvine\, CA\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-with-touchscreen-instructor-norwood-classroom.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260918T083000
DTEND;TZID=America/Los_Angeles:20260918T160000
DTSTAMP:20260612T145124Z
CREATED:20260515T133044Z
LAST-MODIFIED:20260612T145124Z
UID:10000109-1789720200-1789747200@www.instron.com
SUMMARY:Bluehill® Universal TestProfiler Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-testprofiler-method-development-09-18-2026/
LOCATION:Irvine\, CA\, Irvine\, CA\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-instructor-big-projector.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260921T090000
DTEND;TZID=America/New_York:20260921T163000
DTSTAMP:20260612T145318Z
CREATED:20260513T193314Z
LAST-MODIFIED:20260612T145318Z
UID:10000008-1789981200-1790008200@www.instron.com
SUMMARY:Introduction to Static Materials Testing
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/en/event/introduction-to-static-materials-testing-8/
LOCATION:Virtual
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2020/10/free-training-homepage-news.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260922T090000
DTEND;TZID=America/New_York:20260922T163000
DTSTAMP:20260612T145454Z
CREATED:20260515T133046Z
LAST-MODIFIED:20260612T145454Z
UID:10000110-1790067600-1790094600@www.instron.com
SUMMARY:Bluehill® Universal Introduction to Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-introduction-to-test-method-development-09-22-2026/
LOCATION:Virtual
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/dogbone-with-course-materials.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260923T090000
DTEND;TZID=America/New_York:20260923T163000
DTSTAMP:20260612T150551Z
CREATED:20260514T192457Z
LAST-MODIFIED:20260612T150551Z
UID:10000054-1790154000-1790181000@www.instron.com
SUMMARY:Bluehill® Universal Advanced Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-advanced-test-method-development-09-23-2026/
LOCATION:Virtual
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2024/12/hwservicetraining-400x250-1.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260924T090000
DTEND;TZID=America/New_York:20260924T163000
DTSTAMP:20260612T150909Z
CREATED:20260515T133048Z
LAST-MODIFIED:20260612T150909Z
UID:10000112-1790240400-1790267400@www.instron.com
SUMMARY:Bluehill® Universal TestProfiler Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-testprofiler-method-development-09-24-2026/
LOCATION:Virtual
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2020/10/free-training-homepage-news.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260929T080000
DTEND;TZID=America/New_York:20260929T163000
DTSTAMP:20260612T151107Z
CREATED:20260518T173844Z
LAST-MODIFIED:20260612T151107Z
UID:10000129-1790668800-1790699400@www.instron.com
SUMMARY:Introduction to Static Materials Testing
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/en/event/introduction-to-static-materials-testing-09-29-2026/
LOCATION:Instron Corporate Headquarters\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-projector.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Instron Corporate Headquarters 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260929T090000
DTEND;TZID=Europe/London:20260929T163000
DTSTAMP:20260612T151246Z
CREATED:20260515T133049Z
LAST-MODIFIED:20260612T151246Z
UID:10000113-1790672400-1790699400@www.instron.com
SUMMARY:Bluehill® Universal Introduction to Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nBook This Course
URL:https://www.instron.com/en/event/bluehill-universal-introduction-to-test-method-development-09-29-2026/
LOCATION:Instron European Headquarters\, Coronation Road\, High Wycombe\, Buckinghamshire\, HP12 3SY\, United Kingdom
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/high-wycombe-classroom-with-instructor.jpg
ORGANIZER;CN="Instron Training - Europe":MAILTO:traininguk@Instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260930T080000
DTEND;TZID=America/New_York:20260930T163000
DTSTAMP:20260612T151553Z
CREATED:20260515T135730Z
LAST-MODIFIED:20260612T151553Z
UID:10000115-1790755200-1790785800@www.instron.com
SUMMARY:Bluehill® Universal Introduction to Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-introduction-to-test-method-development-09-30-2026/
LOCATION:Instron Corporate Headquarters\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-with-instructor-norwood-classroom.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Instron Corporate Headquarters 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260930T090000
DTEND;TZID=Europe/London:20260930T163000
DTSTAMP:20260612T151423Z
CREATED:20260514T192458Z
LAST-MODIFIED:20260612T151423Z
UID:10000055-1790758800-1790785800@www.instron.com
SUMMARY:Bluehill® Universal Advanced Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nBook This Course
URL:https://www.instron.com/en/event/bluehill-universal-advanced-test-method-development-09-30-2026/
LOCATION:Instron European Headquarters\, Coronation Road\, High Wycombe\, Buckinghamshire\, HP12 3SY\, United Kingdom
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-projector.jpg
ORGANIZER;CN="Instron Training - Europe":MAILTO:traininguk@Instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261001T080000
DTEND;TZID=America/New_York:20261001T163000
DTSTAMP:20260612T151730Z
CREATED:20260515T135732Z
LAST-MODIFIED:20260612T151730Z
UID:10000116-1790841600-1790872200@www.instron.com
SUMMARY:Bluehill® Universal Advanced Test Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-advanced-test-method-development-10-01-2026/
LOCATION:Instron Corporate Headquarters\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2025/10/Training_Stock_1.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Instron Corporate Headquarters 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261001T090000
DTEND;TZID=America/New_York:20261001T163000
DTSTAMP:20260612T151852Z
CREATED:20260515T135733Z
LAST-MODIFIED:20260612T151852Z
UID:10000117-1790845200-1790872200@www.instron.com
SUMMARY:Bluehill® Universal TestProfiler Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nBook This Course
URL:https://www.instron.com/en/event/bluehill-universal-testprofiler-method-development-10-01-2026/
LOCATION:Instron European Headquarters\, Coronation Road\, High Wycombe\, Buckinghamshire\, HP12 3SY\, United Kingdom
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-holding-dogbone-with-course-materials.jpg
ORGANIZER;CN="Instron Training - Europe":MAILTO:traininguk@Instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261001T110000
DTEND;TZID=America/New_York:20261001T120000
DTSTAMP:20260615T141800Z
CREATED:20260615T132408Z
LAST-MODIFIED:20260615T141800Z
UID:10000131-1790852400-1790856000@www.instron.com
SUMMARY:Vital Signs: Evaluating the Plastics Behind Medical Devices
DESCRIPTION:Mechanical testing plays a critical role in demonstrating that plastics used in biomedical packaging\, components\, and device assemblies are suitable for their intended use. In this session\, we’ll focus on the aspects of mechanical testing that are unique to the biomedical industry—particularly the processes\, controls\, and documentation practices needed to support compliant testing in regulated environments. \nWhat You’ll Learn\n   •   How mechanical testing is applied to single‑use packaging\, components\, and connectors commonly found in biomedical applications\n   •   Practical considerations for testing complex devices and assemblies\, where traditional test approaches may not directly apply\n   •   How to maintain compliance through proper documentation\, validation strategies\, and testing practices aligned with FDA‑regulated environments \nWho Should Attend\nBiomedical engineers\, quality and regulatory professionals\, device manufacturers\, and laboratory teams responsible for mechanical testing within regulated biomedical or medical‑device environments. \nWhy Instron\nInstron combines deep plastics‑testing expertise with extensive experience supporting biomedical laboratories. In this session\, we’ll share practical guidance on improving consistency\, reducing operator‑dependent variation\, and strengthening testing processes to support compliant\, well‑documented mechanical testing workflows. \nRegister Now
URL:https://www.instron.com/en/event/vital-signs-evaluating-the-plastics-behind-medical-devices/
LOCATION:Virtual
CATEGORIES:Webinars
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/06/plastics-in-medical-devices-webinar.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261002T080000
DTEND;TZID=America/New_York:20261002T163000
DTSTAMP:20260612T151957Z
CREATED:20260515T135735Z
LAST-MODIFIED:20260612T151957Z
UID:10000118-1790928000-1790958600@www.instron.com
SUMMARY:Bluehill® Universal TestProfiler Method Development
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/en/event/bluehill-universal-testprofiler-method-development-10-02-2026/
LOCATION:Instron Corporate Headquarters\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/high-wycombe-classroom-with-instructor.jpg
ORGANIZER;CN="Instron Training - North America":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Instron Corporate Headquarters 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
END:VCALENDAR