Literature

Literature Library for Brochures, Manuals, White Papers, & Case Studies

AVE2 Dynamic Strain Measurement

In addition to its excellent performance for static testing, the Instron AVE 2 is now available with an option for cyclic testing and high speed monotonic test measurement. Capable of tracking displacement at up to 500mm/s with cyclic test frequencies up to 20Hz, it offers the speed and flexibility scientists and engineers have been waiting for to study the dynamic behaviour of materials without contacting the specimen.

Download

Products 2/10/2022 2.7 MB

V-Notch Shear Fixtures | ASTM D5379 & D7078

Instron® Shear Test Fixtures are designed for in-plane or interlaminar shear testing of composite materials. The V-Notched Beam Method, more commonly known as the Iosipescu Shear Method, is described in ASTM D5379, while the V-Notched Rail Shear Method is outlined in ASTM D7078. Both test methods share many common characteristics and have the distinctive V-notches in the specimen design, which serve to create a localized and approximate uniform shear stress zone between the notches. Also, a ±45° two-element strain gauge is often used to directly verify the shear strains applied.

Download

Products 2/1/2022 0.5 MB

2713 Series Self-Tightening Roller Grips

The self-tightening roller grips are primarily designed for the precision testing of elastomeric and other flexible materials exhibiting a large reduction in cross-section area under load. They provide excellent testing accuracy, positive non-slip gripping action, and are quick and simple to use.

Download

Products 2/1/2022 196.0 KB

Manual Wedge Action Grips | 2716-01x, -02x, and 2736-01x Series

These versatile manual wedge action grips are equipped with moving grip bodies which allows them to be tightened onto a specimen without altering the vertical position of the faces in relation to the specimen.

Download

Products 1/11/2022 0.6 MB

Webbing Capstan Grips | 2715-003

Webbing capstan grips are designed to permit faster, easier testing of seat belts and other high strength belts and tapes. These grips are designed to permit predetermination of specimen length, and allow quick, convenient loading.

Download

Products 12/21/2021 354.4 KB

2850 Series T-Slot Tables

The T-slot table provides an extended work area primarily intended for clamping components or structures for performing tensile, compression or flexural tests.

Download

Products 12/8/2021 1.0 MB

Does Your Notch Quality have an Adverse Effect on your Data Reliability?

The Instron® Motorized Notcher allows an operator to create notched specimens accurately, quickly, and safely.

Download

Products 10/15/2021 0.5 MB

Does Your Specimen Quality have an Adverse Effect on Your Data Reliability?

The Instron® Hollow Die Punch system is a tool used to create dog bone shaped specimens easily, quickly, and safely. An ideal choice over the “manual” punching of specimens, the system is powered by compressed air and creates a tensile specimen that is free of tool marks, incipient cracks, induced stresses, internal deformation, and heat distortion in or on the specimen.

Download

Products 10/15/2021 6.3 MB

2810 Series Micro 3 Point Bend

Bend or flexure testing provides a convenient method for characterizing the strength of the miniature components and specimens typical of those found in microelectronics applications.

Download

Products 10/14/2021 472.6 KB

Foam Compression Fixture | 2810-130

The foam compression fixture is designed for indentation and compression testing of expanded cellular materials. Standards that require this style of fixture include ASTM D3574, Method B1 and B2, ASTM D5672, and ISO 2439.

Download

Products 10/13/2021 423.3 KB