Instron
  • Back
  • Home
  • Productos
    SISTEMAS DE PRUEBAS
    Sistemas de pruebas universales
    Resistencia estructural
    Sistemas de pruebas automatizados
    Sistemas de pruebas dinámicas y de fatiga
    Simulación de choque
    Medidores de torsión
    Reómetros y medidores de flujo de fusión
    Torres de impacto en caída libre y péndulos
    HDT y Vicat
    Sistemas fuera de producción
    ACCESORIOS
    Software
    Celdas de carga
    Extensómetros
    Desgarre, fricción, perforación
    Hornos y cámaras ambientales
    Mordazas de tracción
    Soportes de fijación flexibles
    Platos de compresión
    Celdas de carga
    Accesorios de ensayo para electrónica y microelectrónica
    Dispositivos biomédicos/farmacéuticos
    Medición y preparación de probetas
    Todos los accesorios
  • Soluciones Industriales
    Normas ASTM Normas ISO Otros estándares
    POR INDUSTRIA
    Automotriz
    Baterías
    Biomédica
    Electrónica
    MATERIALES
    Composicion
    Rieles
    Plástica
  • Servicio y soporte
    Instron Remote Technical Support CICLO DE VIDA DEL PRODUCTO
    SERVICIOS
    Calibración y verificación
    Asistencia de implementación de Instron
    Mantenimiento preventivo
    Instalación y reubicación
    Reparación y restauración
    Actualizaciones
    CAPACITACIÓN
    Capacitación en sus instalaciones
    SOPORTE TÉCNICO
    Preguntas Frecuentes
    Servicios de actualización de software
    RECURSOS
    Manuales
    Localizador de número de serie
  • Nuestra empresa
    EMPLEO SALA DE PRENSA SUSCRÍBASE A NUESTRO BOLETÍN
    ACERCA DE NOSOTROS
    Nuestra historia
    Ubicaciones
    Acreditaciones y certificados
    RECURSOS
    Glosario
    Tipos de ensayos
    Newsletters
    Biblioteca de documentación
    Noticias
    Eventos
    Seminarios web
    Estudios de caso
    Términos y privacidad
    Accesibilidad
    Aviso de cookies
    Aviso de privacidad de datos GDPR
    Control de exportación
    Aviso de Privacidad
    Términos y condiciones
    Condiciones de uso
  • Contáctenos
  • South America
Productos » Accesorios de ensayo » Accesorios de flexión » Accesorios de ensayo de flexión en tres puntos » Guided-Bend/Weld Bend Test Fixture

Guided-Bend/Weld Bend Test Fixture

General Purpose Flexure Fixtures

  • Guided Bend & Weld
  • Fixtures
ContáctenosSolicite Um Catálogo De Acessórios
W-6810
  • W-6810
  • DESCRIPCIÓN
  • Specifications
  • Contactar

Two types of bend fixtures are available for evaluating the ductility of plate specimens and welded ferrous and non-ferrous materials. The main difference between the two fixtures is in the base, the guided bend test fixture has a fixed span base, while the weld bend test fixture has an adjustable span base.

Both fixtures use plungers or loading struts with a fixed diameter nose for testing a particular specimen thickness. The plungers are attached to the adjustable crosshead using the grip bumper plate or a threaded adapter. 

The base is equipped with a dowel hole in the center so that it can be doweled to the compression table and kept from sliding during a test. This also will maintain the alignment of the plunger in relation to base so that the force is applied in the center of the span. 

The hardened rollers in the base are captured but free to rotate to allow the specimen to slide as the plunger moves between the rollers. The depth of the base will typically allow up to a full 180 degree bend in the specimen.

Principle of Operation

The bending force is applied as the specimen is forced against the plunger, either as the base is raised with the table or as the crosshead moves down depending on the frame being used. The plunger forces the specimen into a 180 degree bend against the rollers on the base.

On the weld bend test fixture, one half of the base can be adjusted to one of four different positions to allow for testing different thickness specimens. A separate plunger or strut is required for each thickness specimen, several struts are available depending on the fixture.

Guided bend fixtures have a fixed span base and a single diameter loading strut or plunger to form a complete assembly. Specimen loading is carried the same as with the weld bend fixture though a separate assembly must be purchased for each specimen thickness.

Application Range

  • Type of Loading: compression bend 
  • Specimen Material: wrought or cast steel, non-ferrous materials 
  • Specimen Types: flat, flat welded

W-6810 | Guided-Bend/Weld Bend Test Fixture

Guided-Bend / Weld Bend Test Fixture, Adjustable Span for "U" bend tests of plane plate or welded flat specimens. 

Fixture consists of a t-slot base with adjustable span supports supported by two tie rods.

Fixture specifications:

  • Span - 0 to 254 mm (10.0 in)
  • Specimen width - up to 76 mm (3.0 in)
  • Support diameter - 38.1 mm (1.5 in) roller
  • Support depth - 135 mm (5.3 in)
  • Maximum Capacity - 100 kN (22,500 lbf)
  • Fixture Capacity

100kN (22,500 lbf) if installed fully supported

If installed with overhang, capacity is rated per below

Capacity = 100kN (22,500 lbf) where x < 125mm (5 in)

Capacity (kN) = 12,600/x when x > 125 mm

Capacity (lbf) = 111,900/x when x > 5 in

Where x = distance from end of machine loading table to lower flexure support

  • Lower connection - 12.7 mm (0.5 in) centering pin
  • Weight: 59 kg (130 lb) not including loading noses
  • Effective height with loading nose - 357 mm (14.06 in) not including specimen thickness.

Fixture meets the following US and International standards:

ASTM A370-07a, ASTM E190-92, ASTM E290-97a, ANSI/AWS B4.0-98, API 1104, API 5L, AS 2205.3.1, ASME IX 2004, JIS Z2248, GOST 14019 (for specimens 19 to 38.1 mm thick), ISO 5173, ISO 7438, EN ISO 15630-1, EN 910.

Notes:

  1. Fixture requires loading noses (sold separately) of appropriate size for material being tested and standard being used.
  2. The bend fixture cannot bend the specimen to a complete 180 degrees due to necessary clearances between the loading nose and supports.

W-6810-A | US Customary Loading Nose Set for Guided/Weld Bend Test Fixture

Includes 0.5, 1.0, 1.5, 2.0 inch diameter loading noses.

  • Loading nose width: 51 mm (2 in)
  • Loading nose height: 171 mm (6.75 in)
  • Attachment: Type R1m (1.0 in holding button)

CAUTION:
Most standards require loading nose diameters of 4 x specimen thickness. However, some standards allow for other diameter loading noses to be specified locally or as agreed between vendor and customer. It is the customer's responsibility to ensure the proper size loading noses are ordered.

Note: Other size loading noses available individually or in sets as special order.

W-6810-B | Loading Nose Set for Guided-Bend/Weld-Bend Test Fixture

Metric Loading Nose Set for Guided Bend / Weld Bend Test Fixture. Includes 12, 16, 20, 24, 32, 40, 48 mm diameter loading noses.

  • Loading nose width: 51 mm (2 in)
  • Loading nose length: 171 mm (6.75 in)
  • Attachment: Type R1m (1.0 in holding button)

CAUTION:
Most standards require loading nose diameters of 4 x specimen thickness. However, some standards allow for other diameter loading noses to be specified locally or as agreed between vendor and customer. It is the customer's responsibility to ensure the proper size loading noses are ordered.

Note: Other size loading noses available individually or in sets as special order.

Anvil Diameter 38.1 mm (1.5 in)
Capacity 100 kN (22,500 lbf)
Lower Fitting 12.7 mm (0.5 in)
Specimen Width up to 76 mm (up to 3.0 in)
Support Span 0-250 mm (0-10 in)
Upper Fitting Refer to W-6810-A/-B

Su correo electrónico

Por favor introduzca su correo electrónico Su correo electrónico debe tener el símbolo @ El correo electrónico sólo puede tener letras, números y los siguientes caracteres: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~ Los dominios de correo electrónico sólo pueden contener letras, números, puntos (.) y guiones (-)

Su mensaje

750 Character Max Por favor introduzca su mensaje El correo electrónico sólo puede tener letras, números y los siguientes caracteres: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~
Siguiente Chequear si Ud. es un visitante repetitivo …

Bienvenido de nuevo!

Su información de contacto

Por favor introduzca su nombre Please use letters and numbers only.
Por favor introduzca su apellido Please use letters and numbers only.
Por favor seleccione país
Por favor introduzca su empresa Please use letters and numbers only.
Por favor introduzca su dirección Please use letters and numbers only.
Por favor introduzca su dirección 2 Please use letters and numbers only.
Por favor introduzca su dirección 3 Please use letters and numbers only.
Por favor introduzca población Please use letters and numbers only.
Por favor introduzca ciudad Please use letters and numbers only.
Por favor seleccione país/provincia
Por favor introduzca código postal Please use numbers only
Por favor introduzca número de teléfono Please use numbers only

Por favor confirme que esta de acuerdo con la política de privacidad y cookies para poder enviar este formulario

Acepto los términos y condiciones de privacidad y las cookies de privacidad de Instron

Suscríbase al boletín de noticias de Instron!
Marque esta casilla para recibir nuestro boletín técnico mensual, así como otras noticias comerciales de Instron centradas en productos, próximos eventos, y mucho más! (Lea una edición muestra de nuestro boletín técnico).

Por favor elija una opción de suscripción Uno o más campos obligatorios están vacíos, completar el formulario para poder continuar. Uno o más campos contienen errores de formato, corrija los errores para continuar. Por favor confirme que esta de acuerdo con la política de privacidad y cookies para poder enviar este formulario

Selección Zona

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMACIÓN DE CONTACTO

825 University Ave
Norwood, MA,
02062-2643, US

Ventas: +1 800 564 8378

Servicio Técnico: +1 800 473 7838

Consultas Generales: +1 800 877 6674

ENLACES ÚTILES:
  • Sistemas de ensayos
  • Software
  • Accesorios
  • Catálogo
  • Empleo
  • News
  • Soluciones de ensayos
  • Estudios de caso
  • Seminarios web
  • Glosario
  • Biblioteca
  • Eventos
Policies / Legal
  • Política de privacidad y cookies
  • Condiciones de uso
  • Accessibility
  • Control de exportación
  • Aviso sobre datos del GDPR
CONECTE CON NOSOTROS
SUSCRÍBASE A NUESTRO BOLETÍN DE NOTICIAS
DIRECCIÓN DE CORREO ELECTRÓNICO
© Illinois Tool Works Inc. Todos los derechos reservados.
[email protected]
  • Política de privacidad y cookies
  • Condiciones de uso
  • Accessibility
  • Control de exportación
  • Aviso sobre datos del GDPR