Collet Style
Two standard sets of Collet Style grips are available: a small collet grip set for smaller specimens and a large collet grip set for larger specimens. Both sets are double angle style.
Principle Of Operation
The Collet Style grips are threaded into or bolted to the output shaft and/or torque cell of MT series frames.
The collet grips use a split collet design that, when manually tightened, provides nearly uniform clamping pressure on the specimen. Collet Style grips accept a smaller range of specimen diameters than chuck style grips (W-MT01 Series) but can withstand higher torsional forces. Both small and large collet grip assemblies are available for gripping a range of specimens. Adapters are included to attach collet grips to the MT series frames.
Application Range
- Types of Loading: torsion
- Specimen Material: various
- Specimen Types: round
Accessories
| Item Name | Cat # |
|---|---|
| Large Collet Grip Assembly, Range 6.3 - 14.25 mm (0.25 in - 0.5625 in) | W-MT02-B |
| Small Collet Grip Assembly, Range 0.8 - 6.3 mm (0.03125 - 0.25 in) | W-MT02 |