Specimen Marking Punches
Gauge point punches are used to punch mark a metallic specimen with a set gauge length before testing so that specimen elongation can be measured either during or after the test. Manual punches are available for a range of different gauge lengths.
Principle Of Operation
Manual gauge point punches require a strike with a hammer to punch mark the specimen. Standard punches consist of either a single set of punch points or a combination of two different sets of punch points. The punches are checked at the factory to provide punch marks at a predetermined, fixed gauge length. Special punches that provide multiple punch points spaced at fixed increments can also be purchased.Application Range
- Provide consistent fixed gauge length marking of metallic specimens
Accessories
| Item Name | Cat # |
|---|---|
| Extra Punch Points , Set of Two | W-6709 |
| Manual Gauge Point Punch | W-6714 |
| Manual Gauge Point Punch | W-6771 |
| Manual Gauge Point Punch | W-6719 |
| Manual Gauge Point Punch | W-6771-B |
| Manual Gauge Point Punch, 0.5 in Gauge Length | W-6718 |