Specimen Measurement Devices
A variety of specimen measurement devices can be purchased to provide digital measurement, digital measurement with automatic data entry, or manual measurement.
Specimen measuring with digital instruments, such as calipers and micrometers, provide accurate measurement. They can be purchased in a variety of measuring ranges. When purchased with the automatic data entry interface, the instrument will send the digital measurement directly to the controlling software that is being used to run the test. No manual entry is needed. These instruments are compatible with Bluehill®, Merlin™, Partner™ and Series IX™ advanced materials testing software.
Various manual measurement devices are available for post-test determination of specimen elongation or reduction of area. Percent elongation scales (both standard and telescoping are available) measure the elongation of flat specimens and a reduction of area gauge measures the reduction of area of a round specimen.
Principle Of Operation
Digital transfer of data from the measuring instrument to the software is accomplished with an automatic data entry interface. This interface translates and routes data from the instrument with an RS-232 output and connecting cables to the controlling software.
The reduction of area and percent elongation devices operate similar to a ruler or sliding scale ruler.
- Accurate specimen measurement
- "Hands-free" data entry
|Item Name||Cat #|
|Automatic Data Entry Interface for use with Partner||W-3276-B|
|Caliper, Pointed Jaw, 0-150 mm (0-6 in) w/Data Cable||W-3275-Q|
|Caliper, Standard Jaw, 0-150 mm (0-6 in) w/Data Cable||W-3275-N|
|Caliper, Standard Jaw, 0-300 mm (0-12 in) w/Data Cable||W-3275-O|
|Hand Held Automatic Caliper Measurement System with Carbide Tips||2850-005|
|Micrometer Measurement System||2850-007|
|Micrometer, Outside, 0-25 mm (0-1 in) with Data Cable||W-3275-A|
|Micrometer, Outside, 25-50 mm (1-2 in) with Data Cable||W-3275-B|
|Vertically Mounted Probe Automatic Measurement System||2850-003|