Literatura

Biblioteca de folletos, manuales, informes y casos de estudio.

Pneumatic Side-Action Grips | 2712-05x Series

The Instron 2712-05x Series Pneumatic Side-Action Grips offers a versatile gripping solution for a wide range of materials. Available in both 50 and 250 N options, the grip’s robust design is ideal for round (wires),fiber (mono-filaments), and flat specimens with or without shoulder.

Download

Products 3/22/2022 1.9 MB

Curved Needle Testing Systems

The Instron® Needle Testing System is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal benchtop space. The testing system operates with Instron Bluehill® 3 Software that provides test control, data acquisition,test results, and reports, as well as a large library of calculations.

Download

Products 3/18/2022 493.7 KB

Manual Wedge Action Grips 2716-00x and 2736-00x Series

The manual wedge action grip is designed for easy specimen loading, alignment, and positioning. After initial face to specimen contact, gripping force will increase as the testing load increases. Virtually no preload is seen during specimen clamping due to the design of the moving grip bodies. This makes them particularly suitable for testing high strength materials, such as metals and composites, ensuring that specimen slippage is eliminated.

Download

Products 3/8/2022 1.1 MB

6800 Series Multi Station Systems

The Instron 6800 Series Multi Station System offers enhanced throughput with its ability to perform simultaneous, independent tests on up to five separate specimens using a single load frame.

Download

Products 2/18/2022 0.8 MB

Torsion Add-On Version 3 Operator's Guide

The Torsion Add-on system comprises a compatible electromechanical load frame, e.g. 6800 Series, a secondary motor mounted to the moving crosshead, a torsion controller assembly mounted to the column of the load frame and a suitable biaxial load cell mounted to the base adapter This configuration provides torque to the specimen which allows biaxial testing of specimens.

Download

Manual 2/14/2022 0.6 MB

AVE2 Dynamic Strain Measurement

In addition to its excellent performance for static testing, the Instron AVE 2 is now available with an option for cyclic testing and high speed monotonic test measurement. Capable of tracking displacement at up to 500mm/s with cyclic test frequencies up to 20Hz, it offers the speed and flexibility scientists and engineers have been waiting for to study the dynamic behaviour of materials without contacting the specimen.

Download

Products 2/10/2022 2.7 MB

V-Notch Shear Fixtures | ASTM D5379 & D7078

Instron® Shear Test Fixtures are designed for in-plane or interlaminar shear testing of composite materials. The V-Notched Beam Method, more commonly known as the Iosipescu Shear Method, is described in ASTM D5379, while the V-Notched Rail Shear Method is outlined in ASTM D7078. Both test methods share many common characteristics and have the distinctive V-notches in the specimen design, which serve to create a localized and approximate uniform shear stress zone between the notches. Also, a ±45° two-element strain gauge is often used to directly verify the shear strains applied.

Download

Products 2/1/2022 0.5 MB

2713 Series Self-Tightening Roller Grips

The self-tightening roller grips are primarily designed for the precision testing of elastomeric and other flexible materials exhibiting a large reduction in cross-section area under load. They provide excellent testing accuracy, positive non-slip gripping action, and are quick and simple to use.

Download

Products 2/1/2022 196.0 KB

Manual Wedge Action Grips Data Sheet | Catalog No. 2716-01X-02x and 2736-01x

These versatile manual wedge action grips are equipped with moving grip bodies which allows them to be tightened onto a specimen without altering the vertical position of the faces in relation to the specimen.

Download

Products 1/11/2022 0.6 MB

Webbing Capstan Grips | 2715-003

Webbing capstan grips are designed to permit faster, easier testing of seat belts and other high strength belts and tapes. These grips are designed to permit predetermination of specimen length, and allow quick, convenient loading.

Download

Products 12/21/2021 354.4 KB

2850 Series T-Slot Tables Data Sheet

The T-slot table (catalog no. 2850-202, -203, -205, -206, CP103964) provides an extended work area primarily intended for clamping components or structures for performing tensile, compression or flexural tests.

Download

Products 12/8/2021 0.9 MB

Does Your Notch Quality have an Adverse Effect on your Data Reliability?

The Instron® Motorized Notcher allows an operator to create notched specimens accurately, quickly, and safely.

Download

Products 10/15/2021 0.5 MB

Does Your Specimen Quality have an Adverse Effect on Your Data Reliability?

The Instron® Hollow Die Punch system is a tool used to create dog bone shaped specimens easily, quickly, and safely. An ideal choice over the “manual” punching of specimens, the system is powered by compressed air and creates a tensile specimen that is free of tool marks, incipient cracks, induced stresses, internal deformation, and heat distortion in or on the specimen.

Download

Products 10/15/2021 6.3 MB

2810 Series Micro 3 Point Bend

Bend or flexure testing provides a convenient method for characterizing the strength of the miniature components and specimens typical of those found in microelectronics applications.

Download

Products 10/14/2021 472.6 KB

Foam Compression Fixture | 2810-130

The foam compression fixture is designed for indentation and compression testing of expanded cellular materials. Standards that require this style of fixture include ASTM D3574, Method B1 and B2, ASTM D5672, and ISO 2439.

Download

Products 10/13/2021 417.6 KB

Flatwise Tensile Strength Fixtures | 2505-013, 2505-014, 2505-015

The sandwich flatwise tension fixture is designed to measure the bond strength between the facing and core of a sandwich construction panel.

Download

Products 10/13/2021 406.5 KB

CEAST Impact Handbook

CEAST Impact Handbook

Download

Products 10/11/2021 1.3 MB

Asia Terms and Conditions

Download

Corporate 10/4/2021 233.4 KB