Residual Seal Force Testing with the AT2 Automated XY Stage

Glass vials must maintain a robust seal between the glass vial and the elastomeric closure to prevent product contamination and leakage. Residual seal force (RSF) testing is an evaluation of the quality of this seal. To perform this test, a compression load is applied around the edge of a vial until the lower lip of the aluminum cap breaks away and begins to move in a direction opposite to the loading. This type of testing at mid to higher volumes is an ideal candidate for automation – particularly a semi-automated solution such as the AT2 Automated XY Stage.

With a standard test setup an operator would always need to be at the machine. However, by using an Automated XY Stage, the operator can build a test sequence in the Bluehill method, load specimens into a tray mounted on the XY stage, start the test, and walk away to focus on other tasks.

Related Video(s)

AT2 Automated XY Stage Throughput & Efficiency

For testing labs stretched thin by a limited number of operators or increased workloads, the AT2 Automated XY Stage is designed to improve throughput and repeatability, while also freeing up your operators to focus on other value add tasks.

Automated Carousel Testing System

Instron’s Automated Carousel Testing System utilizes an innovative, adaptable design for testing of medical vials, cartridges, and pre-filled syringes. The small footprint allows it to be put on standard lab benches, adding automation to even the smallest labs.

Volver
al principio