90° Pneumatic Peel Fixture: Testing Adhesion of Electrodes in Lithium-Ion Batteries

The pneumatic 90° peel fixture was developed specifically for electrode adhesion testing. This peel fixture is designed to help an operator align and clamp down a specimen quickly and consistently while ensuring that a 90° angle can be maintained from start to finish. With its improved clamping and specimen alignment aids, the fixture provides greater repeatability, throughput, and reduced operator involvement over a standard manually controlled and set up peel fixture.

Learn more about battery testing accessories.

More information on electric vehicle battery testing.

Related Video(s)

Tack Testing Fixture: Testing the Adhesion of Electrodes

Designed for ease of specimen preparation and throughput, this Tack Test Fixture is optimized for testing the adhesion strength of electrodes to their current collector. The contact area of the tack can be designed to various sizes as needed. It is designed with 5 specimen locations and able to perform 5 consecutive tests without the need for additional specimen preparation in between each test.

al principio