Instron
  • Back
  • Home
  • Productos
    SISTEMAS DE ENSAYO
    Sistemas de ensayo universales
    Durabilidad estructural
    Sistemas de ensayo automatizados
    Sistemas de ensayo dinámicos y de fatiga
    Simulación de impacto
    Sistemas de ensayo de torsión
    Péndulos y torres de impacto
    Reómetros y medidores de fluidez
    HDT y Vicat
    Sistemas fuera de producción
    ACCESORIOS
    Software
    Mordazas de tracción
    Pelado, fricción y punzonado
    Cámaras ambientales y hornos
    Células de carga
    Fijaciones de flexión
    Platos de compresión
    Fijaciones para el sector biomédico y farmacéutico
    Extensómetros
    Células de carga
    Accesorios para ensayos de baterías
    Fijaciones para la microelectrónica
    Acoplamientos y adaptadores
    Medición y preparación de probetas
    Todos los accesorios
  • Soluciones Industriales
    Normas ASTM Normas ISO Otros estándares
    POR SECTOR
    Sector automotriz
    Baterías
    Sector biomédico
    Sector electrónico
    MATERIALES
    Composicion
    Rieles
    Plástica
  • Servicio y soporte
    Instron Remote Technical Support CICLO DE VIDA DEL PRODUCTO
    SERVICIOS
    Calibración y verificación
    Ayuda en la implementación de Instron
    Mantenimiento preventivo
    Instalación y reubicación
    Reparación y renovación
    Actualizaciones
    FORMACIÓN
    Formación in situ en sus instalaciones
    Secretos para Ensayos Fiables
    SOPORTE TÉCNICO
    Preguntas frecuentes
    Servicios de actualización de software
    RECURSOS
    Localizador de número de serie
    Manuales
  • Nuestra empresa
    EMPLEO SALA DE PRENSA SUSCRÍBASE A NUESTRO BOLETÍN DE NOTICIAS
    ACERCA DE NOSOTROS
    Nuestra historia
    Localización
    Certificados y acreditaciones
    RECURSOS
    Glosario
    Tipos de ensayo
    Estudios de caso
    Biblioteca de documentación
    Noticias
    Eventos
    Seminarios web
    Boletines informativos
    Términos y privacidad
    Accesibilidad
    Aviso de cookies
    Aviso de privacidad de datos GDPR
    Control de exportación
    Aviso de Privacidad
    Términos y condiciones
    Condiciones de uso
  • Contacto
  • España
Productos » Sistemas de ensayos » Structural Durability » Structural Durability Products » Hydropuls® actuators

Hydropuls® actuators

Menu
  • Structural Durability Products
    • Controller Labtronic® 8800ml
    • Hydropuls® actuators
    • Power Packs and Accessories
    • Sensors
    • Servo valves
    • Test frames and fixtures
Contact Us
Actuator 1
Actuator 2
Actuator 4
Actuator 6
Actuator 7
  • Actuator 1
  • Actuator 2
  • Actuator 4
  • Actuator 6
  • Actuator 7
  • DESCRIPCIÓN
  • Related Products
  • Software
  • Contactar

Challenge

The development of structures and individual components is based on computational life estimation. This is to ensure that the products remain fail-safe within their calculated service life. However, the verification of the computational life estimation is carried out through laboratory testing with realistic simulation of service conditions including displacements, loads and environment.

It is necessary to introduce service loads in a controlled way into materials, components or system modules. The actuators required for this purposes must meet the highest requirements for precision and controllability in order to produce reliable results. Furthermore, these actuators have to be robust and able to operate in a reliable way over many years of operation.

Solution

Hydropuls® linear and rotary actuators convert hydraulic energy into displacements and forces at the test specimen. The actuators are controlled precisely by the 8800ml control electronics and the servo-valve. Hydropuls® actuators can be used in static and dynamic test applications from single axis test machines through to multi-channel test systems.

Hydropuls® actuators are characterized by a number of unique attributes that ensure precise and highly productive operation.

The hydrostatic bearings and the non-contact sealing of the piston rod are unique to the Hydropuls actuator range. As a result, the cylinders are hysteresis-free in quasi-static and dynamic operation over the full displacement and force range. That is free of mechanical seals, friction and wear. This allows continuous operation with minimal downtime and maintenance. The hydrostatic bearing allows the cylinder to react very high transverse loads that often occur in structural testing applications and at specimen failure.


The name Hydropuls® stands for:

  • Highest precision and controllability of loadings
  • exceptional life and operational safety
  • Minimum maintenance
  • highest quality "Designed, made and proven in Germany"

Typical applications are:

  • Characterization of materials and components
  • Static and fatigue testing of materials and components
  • Single- and multi-axis operating load simulation
  • Vibration and shock testing
  • Comfort analysis (e.g. seats)
  • NVH Tests
  • Quality control

  • Hydropuls® Linear Actuator type PL

    Hydropuls® linear actuators are powerful and highly dynamic actuators for generating controlled forces, longitudinal movements, velocities or accelerations. The PL standard cylinders cover force ranges from 5 kN to 20 MN. Displacement amplitudes up to +/- 200 mm are available as standard. In addition to 280 bar operating pressure, the cylinders can also be supplied in 210 bar version. Special cylinders according to customer specifications can be offered on request.

    Hydropuls® Longitudinal Actuator Type Minipuls PLF

    PLF Minipuls linear actuators are used in the frequency range of 1 Hz up to 1000 Hz. The actuator is capable of producing forces up to 7 kN and is particularly suitable for the precise control of even the smallest force amplitudes in the high frequency range. This actuator is used, for example, in our high-frequency testing machine for the characterization of elastomers.

    Hydropuls® Rotary Actuator type PD

    Hydropuls® rotary cylinders are used in mechanical tests to initiate controlled quasi-static or dynamic torques or torsional vibrations in material samples or components. The standard series of Hydropuls® rotary actuators offers nominal torques between 0.5 kNm and 64 kNm with rotation angle up to +/- 50 °. Special cylinders with special nominal torques and angular amplitudes can also be supplied on request.

    Axle Test System

    Axle test rigs are used to reproduce different loads applied to the axle elements when a vehicle is traveling over a variety of road surfaces. Instron can provide models for testing of car, van, truck and bus axles with 6 degree-of-freedom.

    Component Test Systems

    Instrons component testing systems are characterized by the highest quality and reliability, ensuring the highest productivity in daily use.

    Multi-Axis Shaking Table (MAST)

    Multi-axis simulation (MAST) tables are designed for testing of a variety of different specimens in six degrees of freedom. These include components and subassemblies exposed to vibratory loads during vehicle operation; from seats, dashboards and interior equipment components to engine mounts, and cooling modules.

    Road Simulator

    HYDROPULS® road simulators are a versatile and cost efficient solution for testing load inputs through the tires. They are used to perform durability tests, as well as acoustic and vibration analyses in testing and development (BSR, NVH) on complete vehicles, subsystems and power train assemblies.

    Full Vehicle Test System

    Instron offers comprehensive solutions with and without vehicle restraint, with long- or short-stroke introduction of lateral forces as well as the optional environmental simulation with regard to temperature humidity and sun loading.

    Biaxial Wheel Test System (ZWARP)

    The Biaxial Wheel Test (ZWARP) developed by Instron includes an additional hydraulic actuator which allows a controlled and highly accurate adjustment of the angle of attack to produce high lateral forces.

    Dynamic Torsion Test System

    The dynamic torsion test stand is designed for the operational fatigue testing of torsional vibration dampers under rotational speed.

    Shock Absorber Test Systems

    Instron's MSP test system is the ideal tool for reliable, fast and realistic tuning of vehicle chassis designs and development of shock absorber systems.

    Elastomer Test System VHF and MHF

    The MHF and VHF excel outstanding flexibility and the capability to adapt to constantly changing requirements of the viscoelastic properties of elastomeric suspension and chassis components. They are designed specifically for optimum testing of these components to establish their dynamic characteristics.

    RSLabSite modulogic

    All you need for your durability tests is the measurement data obtained from the proving ground – RS LabSite® modulogic will do the rest!

    Su correo electrónico

    Por favor introduzca su correo electrónico Su correo electrónico debe tener el símbolo @ El correo electrónico sólo puede tener letras, números y los siguientes caracteres: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~ Los dominios de correo electrónico sólo pueden contener letras, números, puntos (.) y guiones (-)

    Su mensaje

    750 Character Max Por favor introduzca su mensaje El correo electrónico sólo puede tener letras, números y los siguientes caracteres: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~
    Siguiente Chequear si Ud. es un visitante repetitivo …

    Bienvenido de nuevo!

    Su información de contacto

    Por favor introduzca su nombre Please use letters and numbers only.
    Por favor introduzca su apellido Please use letters and numbers only.
    Por favor seleccione país
    Por favor introduzca su empresa Please use letters and numbers only.
    Por favor introduzca su dirección Please use letters and numbers only.
    Por favor introduzca su dirección 2 Please use letters and numbers only.
    Por favor introduzca su dirección 3 Please use letters and numbers only.
    Por favor introduzca población Please use letters and numbers only.
    Por favor introduzca ciudad Please use letters and numbers only.
    Por favor seleccione país/provincia
    Por favor introduzca código postal Please use numbers only
    Por favor introduzca número de teléfono Please use numbers only

    Por favor confirme que esta de acuerdo con la política de privacidad y cookies para poder enviar este formulario

    Acepto los términos y condiciones de privacidad y las cookies de privacidad de Instron

    Suscríbase al boletín de noticias de Instron!
    Marque esta casilla para recibir nuestro boletín técnico mensual, así como otras noticias comerciales de Instron centradas en productos, próximos eventos, y mucho más! (Lea una edición muestra de nuestro boletín técnico).

    Por favor elija una opción de suscripción Uno o más campos obligatorios están vacíos, completar el formulario para poder continuar. Uno o más campos contienen errores de formato, corrija los errores para continuar. Por favor confirme que esta de acuerdo con la política de privacidad y cookies para poder enviar este formulario

    Selección Zona

    Dismiss Region Selector

    Americas

    • North America
    • Brasil
    • South America

    All Other Countries

    • Global Site

    Europe

    • France
    • Deutschland
    • Italia
    • Polska
    • España
    • United Kingdom

    Asia Pacific

    • 中国
    • India
    • 日本
    • 대한민국
    • 台灣
    • ประเทศไทย
    Instron Logo White
    INFORMACIÓN DE CONTACTO

    C/ Argenters 2,
    Parque Tecnológico del Vallés,
    08290 Cerdanyola,
    Barcelona, Spain

    General: +34 935 947 560

    ENLACES ÚTILES
    • Sistemas de ensayo
    • Software
    • Accesorios
    • Catálogo
    • Biblioteca
    • Soluciones de ensayos
    • Seminarios web
    • Estudios de caso
    • Eventos
    • Empleo
    • Glosario
    • Noticias
    Policies / Legal
    • Privacidad y política de cookies
    • Condiciones de uso
    • Control de exportación
    • Aviso de datos (RGPD)
    CONECTE CON NOSOTROS
    SUSCRÍBASE A NUESTRO BOLETÍN DE NOTICIAS
    DIRECCIÓN DE CORREO ELECTRÓNICO
    © Illinois Tool Works Inc. Todos los derechos reservados.
    [email protected]
    • Privacidad y política de cookies
    • Condiciones de uso
    • Control de exportación
    • Aviso de datos (RGPD)