## Proportional Limit

The proportional limit is the point on a stress-strain curve where the linear, elastic deformation region transitions into a non-linear, plastic deformation region. In other words, the proportional limit determines the greatest stress that is directly proportional to strain. The transition point can be calculated by a specified percent change in slope. Because the proportional limit is not required by many test standards,  it is often used for educational purposes rather than in practice by the materials testing industry.

## How is Proportional Limit Different from Elastic Limit?

The elastic limit is the greatest stress that can be applied to a material without causing plastic (permanent) deformation. For many materials the elastic limit is equivalent or nearly equivalent to the proportional limit. For other materials, such as elastomers, the stress-strain relationship is non-linear and the material will still be within its elastic region long after it has passed through its proportional limit. The elastic limit is essentially a theoretical value that is difficult to determine using a universal testing machine, and for this reason is used mainly for educational purposes rather than in practice by the materials testing industry.

## How is Proportional Limit Different from Yield Strength?

Similar to the elastic limit, the yield strength of a material can also occur beyond the material’s proportional limit. Unlike the elastic limit, the yield strength on a stress-strain curve has been defined by ASTM and ISO test standards. Depending on the material’s stress-strain behavior at yield, a preferred yield calculation is specified by the chosen standard. For instance, metals test standards (ASTM E8 or ISO 6892) have standardized a 0.2% offset yield, which allows the metals industry to objectively evaluate different metals against each other. The stress-strain curve below displays the difference between the proportional limit (4% change in slope) and the 0.2% offset yield point in a metals test.

Related Content

### Serie 3400: soluciones de ensayo asequibles

Sistemas de ensayo universales Serie 3400 de Instron para ensayos de tracción, compresión, doblado y otros materiales.

### Catálogo de sistemas de ensayo Serie 6800 Premier

Los sistemas de ensayo universales Serie 6800 de Instron proporcionan una precisión y fiabilidad sin igual. Construida sobre una arquitectura de sistema Operator Protect pendiente de patente, con un kit Smart-Close totalmente nuevo y funciones de mitigación de colisiones, la Serie 6800 hace que los ensayos de materiales sean más sencillos, limpios y seguros que nunca.

### Catálogo de Bluehill Universal

El software Bluehill Universal está diseñado desde el principio para una interacción táctil y una experiencia de usuario intuitiva. Descubre ensayos más sencillos y limpios con funciones como métodos de ensayo precargados, QuickTest en segundos, exportación de datos mejorada e Instron Connect, una nueva función que proporciona un enlace de comunicación directa con el servicio. Los usuarios de versiones anteriores del software, como Bluehill 2 y Bluehill 3, pueden actualizarse fácilmente a la última versión de Bluehill.

### Contacto

Para obtener más información sobre nuestra industria y nuestras soluciones de pruebas, póngase en contacto con nosotros. Nuestros equipos de atención al cliente están listos para ayudarle.