Servohydraulic Brochure

Instron® is a supplier of a wide variety of mechanical testing equipment in almost every aspect of industry and academia. From quality control through to high-end research and development, we support customers in their pursuit of high quality, long-lasting products. As well as a full range of fatigue testing equipment, you can ask your Instron representative for more information about almost any testing application.

Spinal Implants

The Instron® spinal fixture is designed to meet ASTM F1717-12 requirements. In accordance to the standard, the UHMWPE blocks are attached to the spinal fixture. The design of the blocks can differ, according to the clinical application at the intended spinal location. The way that the blocks are connected to the fixture allow a degree of freedom when performing bending compression, bending tensile, and torsional testing.

8874 Servohydraulic Fatigue Testing System

The Instron® 8874 is a compact tabletop axial-torsion servohydraulic testing system that meets the challenging demands variousstatic and dynamic tests requires. The system carries out axial, torsion, or combined axial-torsion tests. With the actuator in theupper crosshead and a lower t-slot table, the 8874 makes an ideal platform for testing a variety of medical devices, biomaterials,advanced materials, and other components testing.

8803 Servohydraulic Fatigue Testing System

The Instron® 8803 is a versatile servohydraulic fatigue testing system that performs static and dynamic tests on materials and components up to 500 kN. 8803 systems provide complete testing solutions to satisfy the needs of advanced materials and component testing, and are ideally suited for fatigue testing and fracture mechanics. With a large number of configurations and options, including lower t-slot tables, the 8803 makes an ideal platform for any laboratory.

8801 Series Servohydraulic Fatigue Testing Systems

The Instron® 8801 is a compact servohydraulic fatigue testing system that meets the challenging demands of various static and dynamic testing requirements. 8801 systems provide complete testing solutions to satisfy the needs of advanced materials and component testing, and are ideally suited for fatigue testing and fracture mechanics. The compact design of the 8801 frame makes it ideal for installation within any laboratory environment, generally without the need for strengthened floors or raised ceiling heights.

Pneumatic Tire Cord Grips Data Sheet

The Instron pneumatic tire cord grips (catalog number 2714-010) provide a convenient method for clamping tire cord and braided wire during testing. A guide pin allows for easy loading onto a graduated radius cam, which provides a stress-reduced clamping area on the specimen.

NADCAP Certificate

Preventative Maintenance for the AutoX750 Automatic Contacting Extensometer

Instron Professional Services offers routine preventative maintenance for AutoX750 extensometers, helping to prolong their service life and ensure accurate data and trusted reliability.

2kN High Temp Pneumatic Side Action Grips

2kN pneumatic side action grips designed for use in non-ambient temperature ranges.

SERVICIOS DE GARANTIA EXTENDIDA

Plastics Testing Solutions Brochure

The Instron Plastics Testing Brochure details our extensive suite of testing equipment that enables testing labs to perform all testing necessary to accurately produce and verify material data sheets, including melt flow and HDT / Vicat testers; drop weight impact testers, universal testing machines for tensile, compression, and flexural testing; dynamic testing systems for slow-speed and high-frequency fatigue testing; and pendulum systems for Charpy, Izod, and tensile impact testing.

Instron Scope of Accreditation to ISO/IEC 17025:2017

Instron Certificate of Accreditation ISO/IEC 17025:2017

Calibración de Temperatura

El servicio de calibración de temperatura de Instron garantiza que se cumplan los parámetros de ensayo y que los resultados asociados se calculen con exactitud.

Calibración de la deformación | Instron Professional Services

Instron es un proveedor líder de servicios de medición y calibración de la deformación y ha participado activamente en el desarrollo de las normas ASTM E83, ISO 9513 e ISO 5893 relativas a la medición de la deformación.

Calibración alineamiento

Los ingenieros de servicio TÉCNICO y calibración de Instron trabajan directamente con ASTM y Nadcap para comprender los requisitos de alineación de los sistemas de ensayo de materiales.