ISO 14801 Fatigue Testing of Pre-Angled Endosseous
Dental Implants in a Fluid Bath
The challengePre-Angled dental implants are designed to help dental surgeons make the best use of the existing bone or to remove the need for bone grafting to occur, while providing a secure restorative platform.
The latest revision of the ISO 14801 standard for fatigue testing specifies a method for testing of these pre-angled dental implants in a laboratory situation. The standard requires the implant to be aligned so that the angle of loading is 10° greater than between the implant axis and the axis of the angled portion of the connecting part.


With an array of implant sizes and geometries, angled dental implants can be mounted into a variable angle fixture for testing to the ISO 14801 standard. The fixture needs to ensure that the mounting does not over constraint the implant nor generate large lateral forces that can damage the load cell or the testing machine. Pre-angled dental implants should be tested in ambient air using a frequency of 15 Hz.
As with straight dental implants, pre-angled dental implants can also be tested in an aqueous environment, if corrosion fatigue is expected to occur. The fixture can be mounted within a fluid bath to test the implant in saline solution or another physiological medium and the temperature maintained at 37 °C.
Our E1000 or E3000 ElectroPuls® linear motor test instruments provide an ideal platform for testing and characterizing dental implant performance. If studies of torque required for dental implants need to be undertaken, we suggest using the ElectroPuls E3000 Linear-Torsion test instrument to conduct compression and torsion testing.
We recommend that you review the standard to fully understand its requirements.
Implantes dentales ISO 14801
La norma ISO 14801 «Ensayo de carga dinámica para implantes dentales endoóseos» especifica el procedimiento para las pruebas de fatiga de implantes dentales. Los implantes dentales son diseñados por varios fabricantes y tienen diferentes geometrías y tamaños según el lugar donde se coloquen dentro de la boca. El objetivo de la norma ISO 14801 es establecer un punto de referencia para las pruebas in vitro de implantes con el fin de comparar diferentes diseños y geometrías de implantes. No llega a reproducir las complejas condiciones a las que se someten los implantes cuando se implantan en la cavidad oral. El último diseño del sistema de implantes dentales de Instron es una solución completa para satisfacer todos los requisitos de la norma ISO 14801 y es ideal para su uso con los instrumentos de ensayo ElectroPuls® E1000 o E3000.
Catálogo de ElectroPuls®
Los instrumentos ElectroPuls son sistemas avanzados de ensayo electrodinámico para la realización de pruebas dinámicas y estáticas de materiales y componentes. Alimentados totalmente por una red monofásica, cuentan con la última tecnología para ensayos y otras muchas funciones orientadas al usuario.