General Purpose Accessories
Mechanical Grips
Mechanical wedge action grips are suitable for tension, compression, torsion, and reverse-stress testing on a wide range of specimens and materials. All grips in the range feature an open-fronted design allowing easy specimen insertion, positioning and clamping. They are also suitable for testing within a temperature chamber from -70C to +350℃.
±1 kN Mechanical Grips
These 1 kN grips are mechanically operated and the open-fronted, perfectly suited to the E1000 test instrument.
MORE INFO
±3 kN ±25 Nm Mechanical Grips
These 3 kN grips are mechanically operated and also capable of torsional loading up to 25Nm.
MORE INFO
±10 kN ±100 Nm Mechanical Grips
Suitable for testing flat and round specimens these 10kN mechanical grips mount directly to your ElectroPuls test instrument.
MORE INFO
±20 kN ±130 Nm Mechanical Grips
The largest capacity mechanical grips in the ElectroPuls range are designed to suit your E20000.
MORE INFO
Pneumatic Grips
Pneumatic wedge action grips are suitable for tension, compression and reverse-stress testing on a wide range of specimens and materials. All grips are pneumatically operated directly from the machine handset and the open-fronted design provides easy specimen insertion, positioning and clamping.
±1 kN Pneumatic Grips
Suitable for the whole ElectroPuls family, these 1kN grips offer you a lightweight, pneumatically operated gripping solution.
MORE INFO
±3 kN ±25 Nm Pneumatic Grips
The 3kN pneumatic grips with 25Nm torque capacity, are designed to suit your E3000 test instrument.
MORE INFO
±10 kN ±100 Nm Pneumatic Grips
These 10kN, 100Nm pneumatic grips offer ease of use and powered gripping for flat or round specimens.
MORE INFO
±20 kN ±130 Nm Pneumatic Grips
The 20kN, 130Nm pneumatic grips provide the largest capacity powered grips for your ElectroPuls system.
MORE INFO
Extensometers
AVE 2 Dynamic Non-Contacting
Video Extensometer
Built on non-contacting strain measurement experience, AVE 2 delivers fully integrated dynamic strain measurement and control that you can rely on thanks to patented technologies.
LEARN MORE
2620 Series Clip-On
Extensometer
Accurate lightweight units used for accurate direct measurement and closed-loop control of strain. Their versatility means they can be used in a variety of applications.
LEARN MORE
Load Cells
Dynacell™ is the world's first truly dynamic load cell, designed from the outset for measuring dynamic loads. Dynacell utilizes an accelerometer right at the heart of the load cell, directly on the load axis. This removes the risk of errors in the acceleration reading resulting from off-center loading.
 2527 Series Dynacell Load Cell
±250 N - ±1kN |
 2527 Series Dynacell Load Cell
±5 kN |
 2527 Series Dynacell Load Cell
±10 kN |
2527 Series Dynacell Load Cell
±20 kN |
||
| Force Capacity |
kN lbf |
±0.25 - ±1 56 - 225 |
±5 1,125 |
±10 2,250 |
±20 5,620 |
| Torque Capacity |
Nm in-lb |
0 - ±25 0 - ±225 |
±25 ±225 |
±100 ±880 |
±150 ±1,300 |
| Literature |
MORE INFO | MORE INFO | MORE INFO | MORE INFO |
High Temperature
Pullrod Kit
A set of 4 different length pullrods suitable for fatigue, tension, compression, and torsion testing. Unlocks the high temperature performance of ElectroPuls accessories.
LEARN MORE
Environmental Chamber
Environmental chambers are designed for use with all ElectroPuls instruments, except the E1000, and are capable of providing temperatures from -100C to +350C.
LEARN MORE
Roller Carriage Brackets
Allows chamber to be rolled back from test area for full access to loadstring between tests or when not in use.
LEARN MORE
Compression Platens
This compression fixture has been designed to easily provide the capability of compression testing. The platens are rigidly fixed and are non self-aligning. They have a high stiffness that resists off-centre loads; this retains the parallelism during specimen failure.
3 kN Compression Platens
The 3 kN compression platens are 50mm (2") diameter, compatible with LVDT's and suitable for non-ambient testing.
LEARN MORE
20 kN Compression Platens
The 20 kN compression platens are 100mm (4") diameter, compatible with LVDT's and suitable for non-ambient testing.
LEARN MORE
Flexure Fixture
20kN Flexure Fixture, Fatigue 3-Point
Provides the capability of a 3-point flexure test. The specimen is supported on two lower anvils and the load is applied in the center of the specimen by a single upper anvil.
LEARN MORE
4-Point Bend Fixture Conversion Kit
Used to convert 20 kN Flexure Fixture from a 3-point to a 4-point bend fixture. (2810-500-505)
LEARN MORE
Automated Testing Systems
ElectroPuls® Automated XY Stage
Whether you want to perform multi-location button presses, simulate swiping of touch devices or automate the testing of sample batches, the ElectroPuls Automated XY Stage will revolutionize your testing.
Learn More
Biomedical Fluid Bath
ElectroPuls® Biomedical Fluid Bath - 5 Litre
The ElectroPuls Fluid Bath is the ideal solution for a wide variety of biomedical testing applications in a saline solution or distilled water. When used in conjunction with the Temperature-Controlled Fluid Re-circulator (CP106108), the fluid temperature can be regulated simulating a body temperature of 37°C (98.6°F) for in vivo conditions.
LEARN MORE