1200°C Three-Zone Split Tube Furnace with a Side Entry Extensometer Port
The Instron 3119-160 is a 3 Zone Split Tube Furnace with a side entry extensometer port. It is manufactured with a wire-wound element for maximum operation up to 1200°C (2200°F). The elements are uniquely formed to provide optimum temperature uniformity, ensuring conformance with testing standards such as ASTM E21, ISO 6892-2, EN10002-5,and EN2002-2. Top and bottom furnace end plates are provided, designed to be durable and provide excellent insulation. They include a 20mm (0.787in) diameter hole for use with pull rods.
To ensure operator safety the furnace uses high-grade insulation that does not use Refractory Ceramic Fiber (RCF). To prevent burns, the furnace has a protective shield which makes minimal contact with the furnace to prevent heat transfer, meaning that the external surfaces are not excessively hot during normal operation.
Type K thermocouples with miniature plugs are mounted on the center line in the center of each heated zone. To prevent costly replacements of damaged thermocouples, there is a quick release connection on the outside of the furnace. Should damage occur, it is a simple replacement instead of a complex installation.
Features & Benefits
- Split furnace - Makes loading and removing specimen load strings fast and easy.
- Wide temperature range - Capable of maintaining stable temperature control from 200-1050°C (392°F-1922°F)*
- Fast heating rate with minimal overshoot* - reducing time needed to soak specimens prior to testing.
- Extensometer Port - Allowing simple attachment of side entry extensometers for common gauge length and travel requirements
- Testing Standards - Enabling compliance with common elevated temperature testing standards such as: ASTM E21, ISO 6892-2, EN10002-5, EN2002-2.
- Heat shield - Increases operator safety preventing contact with hot areas of furnace.
- Thermocouples connections outside the furnace - Simplifying replacement if thermocouples cables are damaged.
- Standard Instron mountings - Backwards compatible with all existing accessories.
*When combined with 3119-960 Furnace Controller
| Temperature Rating | 1200°C (2192°F) |
|---|---|
| Number of Heating Zones | 3 |
| Specimen Temperature Range | 200-1050°C (392-1922°F) |
| Overall Heated Length | 300mm (11.81in) |
| Thermocouples | 3 type K with miniature plugs, located in the center of each zone |
| Interior Diameter | 75mm (2.95in) |
| Interior Length | Zone 1/2/3 are equal in size and are 100mm (3.937in) in length |
| Exterior Length | 350mm (13.7in) (394.2mm (15.52in) (including insulation end plates) |
| Exterior Diameter | 254mm (10in) (272.4mm (10.72in) with perforated heat shield) |
| Extensometer Front Slot | 12.7 x 76.2mm (0.5 x 3in) |
| Power Requirements | Determined by Controller (Furnace can be connected for 110V in parallel and 220v if connected in series) |
| Rated Power | Each zone is 613 Watts (whether in 220v or 110v configuration) |
3119-160 Furnace POD
The Instron 3119-160 is a 3 Zone Split Tube Furnace with a side entry extensometer port. It is manufactured with a wire-wound element for maximum operation up to 1200°C (2200°F). The elements are uniquely formed to provide optimum temperature uniformity, ensuring conformance with testing standards such as ASTM E21, ISO 6892-2, EN10002-5, and EN2002-2.
- Prodotti
- 10/7/2020
- 0.7 MB