Fatigue Rated Hydraulic Wedge Grips (+/- 250 kN)
2742-501 | ±250kN (56kip) Fatigue Rated Hydraulic Wedge Grips
- Suitable for gripping flat or round specimens
- Features side-entry design with full access for easy specimen insertion from the side without actuator movement
- Adjustable specimen stops on flat faces provide accurate specimen centering
- Suitable for tension and compression including full reverse-stress dynamic testing capability
- Temperature Range: +4 to +65 °C
- Static Load Capacity ±312kN (70kip)
- Mechanical Interface: M48 x 2 right hand female threads
- Dimensions: 311mm high x 320mm diameter
- Grip mass: 144 kg (317 lbs) approximately per grip
Requires Jaw Faces, 207 bar (3000psi) grip controller and fatigue rated adapters. Quantity: 2 grips
| Capacity | ±250 kN (±56000 lbf) |
|---|---|
| Static or Fatigue Rated | Fatigue |
| Accessory Height | 311 mm (12.25 in) |
| Accessory Width | 320 mm (12.6 in) |
| Accessory Weight | 144 kg (317 lb) |
| Upper Fitting | M48 RH ( Type IIf) |
| Lower Fitting | M48 RH ( Type IIf) |
| Temperature Rating | +4 to +65°C (+39 to +150°F) |
- 207 Bar (3000psi) Hydraulic Grip Controller and Manifold
- Jaw Faces for Flats (Serrated, 1 - 12 mm)
- Jaw Faces for Flats (Flat serrated, 11 - 22 mm)
- Jaw Faces for Flats (Serrated, 21 - 32 mm)
- Jaw Faces for Flats (Serrated, 31 - 42 mm)
- Jaw Faces for Rounds (Vee-Serrated, 5 - 10 mm)
- Jaw Faces for Rounds (Vee-Serrated, 10 - 16 mm)
- Jaw Faces for Rounds (Vee-Serrated, 16 - 22 mm)
- Jaw Faces for Rounds (Vee-Serrated, 22 - 28 mm)
- Jaw Faces for Rounds (Vee-Serrated, 28 - 34 mm)
- Jaw Faces for Flats (Carbide Coated, 1 - 12 mm)
- Jaw Faces for Flats (Carbide Coated, 11 - 22 mm)
- Jaw Faces for Flats (Carbide Coated, 21 - 32 mm)
- Jaw Faces for Flats (Carbide Coated, 31 - 42 mm)
- Stand Alone Grip Controller and Hydraulic Power Supply - 207 Bar (3000 psi), Dual acting/Dual stage
- 207 Bar (3000psi) Hydraulic Grip Controller and Manifold