ElectroPuls® Accessories

Instron is committed to providing a comprehensive range of affordable accessories for ElectroPuls Test Instruments to support your testing needs for today and tomorrow. Below you will find a full range of accessories that can be easily included or added to your ElectroPuls.

General Purpose Accessories

Mechanical Grips

Mechanical wedge action grips are suitable for tension, compression, torsion, and reverse-stress testing on a wide range of specimens and materials. All grips in the range feature an open-fronted design allowing easy specimen insertion, positioning and clamping. They are also suitable for testing within a temperature chamber from -70C to +350C.


2742-102 | ±1 kN Mechanical Fatigue Grips

±1 kN Mechanical Grips
These 1 kN grips are mechanically operated and the open-fronted, perfectly suited to the E1000 test instrument.

MORE INFO


2742-206 ±3 kN ±25 Nm Mechanical Fatigue Grips

±3 kN ±25 Nm Mechanical Grips
These 3 kN grips are mechanically operated and also capable of torsional loading up to 25Nm.


MORE INFO


2742-306 ±10 kN  Mechanic Fatigue Grips

±10 kN ±100 Nm Mechanical Grips
Suitable for testing flat and round specimens these 10kN mechanical grips mount directly to your ElectroPuls test instrument.

MORE INFO


2742-406 Mechanical Grips

±20 kN ±130 Nm Mechanical Grips
The largest capacity mechanical grips in the ElectroPuls range are designed to suit your E20000.


MORE INFO



Pneumatic Grips

Pneumatic wedge action grips are suitable for tension, compression and reverse-stress testing on a wide range of specimens and materials. All grips are pneumatically operated directly from the machine handset and the open-fronted design provides easy specimen insertion, positioning and clamping.


2742-103 | ±1 kN Pneumatic Fatigue Grips

±1 kN Pneumatic Grips
Suitable for the whole ElectroPuls family, these 1kN grips offer you a lightweight, pneumatically operated gripping solution.

MORE INFO


2742-205 ±3 kN kN Pneumatic Fatigue Grips

±3 kN ±25 Nm Pneumatic Grips
The 3kN pneumatic grips with 25Nm torque capacity, are designed to suit your E3000 test instrument.


MORE INFO


2742-315 ±10 kN ±100 Nm Pneumatic Fatigue Grips

±10 kN ±100 Nm Pneumatic Grips
These 10kN, 100Nm pneumatic grips offer ease of use and powered gripping for flat or round specimens.


MORE INFO


20 kN Compression Platens

±20 kN ±130 Nm Pneumatic Grips
The 20kN, 130Nm pneumatic grips provide the largest capacity powered grips for your ElectroPuls system.


MORE INFO



Extensometers


AVE 2 Non-Contacting Video Extensometer

AVE 2 Dynamic Non-Contacting
Video Extensometer

Built on non-contacting strain measurement experience, AVE 2 delivers fully integrated dynamic strain measurement and control that you can rely on thanks to patented technologies.

LEARN MORE


2620 Series Clip-On Extensometer

2620 Series Clip-On
Extensometer

Accurate lightweight units used for accurate direct measurement and closed-loop control of strain. Their versatility means they can be used in a variety of applications.

LEARN MORE



Load Cells

Dynacell is the world's first truly dynamic load cell, designed from the outset for measuring dynamic loads. Dynacell utilizes an accelerometer right at the heart of the load cell, directly on the load axis. This removes the risk of errors in the acceleration reading resulting from off-center loading.



2527 Series Dynacell Load Cells ±250 N - ± 1kN
2527 Series Dynacell Load Cell
±250 N - ±1kN
2527 Series Dynacell Load Cells ±5 kN
2527 Series Dynacell Load Cell
±5 kN
2527 Series Dynacell Load Cells (±10 kN)
2527 Series Dynacell Load Cell
±10 kN
2527 Series Dynacell Load Cells (±20 kN)
2527 Series Dynacell Load Cell
±20 kN
Force Capacity
kN
lbf
±0.25 - ±1
56 - 225
±5
1,125
±10
2,250
±20
5,620
Torque Capacity
Nm
in-lb
0 - ±25
0 - ±225
±25
±225
±100
±880
±150
±1,300
Literature

MORE INFO MORE INFO MORE INFO MORE INFO


High Temperature


Electropuls Pullrod Kit 3117-082

Pullrod Kit
A set of 4 different length pullrods suitable for fatigue, tension, compression, and torsion testing. Unlocks the high temperature performance of ElectroPuls accessories.

LEARN MORE


3119-605 | Environmental Chamber for Table Model Systems

Environmental Chamber
Environmental chambers are designed for use with all ElectroPuls instruments, except the E1000, and are capable of providing temperatures from -100C to +350C.

LEARN MORE


Roller Carriage Brackets for 3119 Series Chambers

Roller Carriage Brackets
Allows chamber to be rolled back from test area for full access to loadstring between tests or when not in use.



LEARN MORE



Compression Platens

This compression fixture has been designed to easily provide the capability of compression testing. The platens are rigidly fixed and are non self-aligning. They have a high stiffness that resists off-centre loads; this retains the parallelism during specimen failure.


3 kN Compression Platens

3 kN Compression Platens
The 3 kN compression platens are 50mm (2") diameter, compatible with LVDT's and suitable for non-ambient testing.

LEARN MORE


c057e017c7e44b56ae9617d20903c00d

20 kN Compression Platens
The 20 kN compression platens are 100mm (4") diameter, compatible with LVDT's and suitable for non-ambient testing.

LEARN MORE



Flexure Fixture


20 kN Flexure Fixture, Fatigue 3 Point

20kN Flexure Fixture, Fatigue 3-Point
Provides the capability of a 3-point flexure test. The specimen is supported on two lower anvils and the load is applied in the center of the specimen by a single upper anvil.

LEARN MORE


3 to 4 Point Conversion Kit 2810-505

4-Point Bend Fixture Conversion Kit
Used to convert 20 kN Flexure Fixture from a 3-point to a 4-point bend fixture. (2810-500-505)


LEARN MORE