Instron
  • Back
  • Home
  • Prodotti
    SISTEMI DI PROVA
    Sistemi di prova universali
    Durabilità strutturale
    Sistemi di prova automatizzati
    Sistemi di prova di fatica e dinamica
    Simulazione di collisione
    Sistemi per test di torsione
    Reometri e Melt Flow Tester
    Torri a caduta di grave e Pendoli
    HDT & Vicat
    sistemi fuori produzione
    ACCESSORI
    Software
    Celle di carico
    Peel, attrito, perforazione
    Camere climatiche e forni
    Morsetti di trazione
    Dispositivi di prova a flessione
    Piatti di compressione
    Dispositivi per il settore biomedico farmaceutico
    Estensometri
    Dispositivi compositi
    Accessori per Prove su Batterie
    Accessori di prova per dispositivi Elettronici e Microelettronici
    Misurazione e preparazione dei provini
    Tutti gli accessori
  • Soluzioni industriali
    Norme ASTM Norme ISO Altri standard
    PER INDUSTRIA
    Automobilistico
    Batterie
    Biomedicale
    Elettronico
    MATERIALI
    Compositi
    Metalli
    Plastica
  • Assistenza e supporto
    Instron Remote Technical Support CICLO DI VITA DEL PRODOTTO
    ASSISTENZA
    Taratura e verifica
    Assistenza Instron all'implementazione
    Manutenzione preventiva
    Installazione e trasferimento
    Riparazione e Ammodernamento
    Aggiornamenti
    FORMAZIONE
    Segreti per prove affidabili
    SUPPORTO TECNICO
    DOMANDE FREQUENTI
    Servizi di aggiornamento software
    RISORSE
    Manuali
    Localizzatore del numero di serie
  • La nostra azienda
    CARRIERE SALA STAMPA ISCRIVITI ALLE NOSTRE NEWSLETTER
    CHI SIAMO
    La nostra storia
    Sedi
    Accreditamenti e certificazioni
    RISORSE
    Glossario
    Tipi di prove
    Newsletter
    Raccolta letteratura di settore
    Notizie
    Eventi
    Webinar
    Casi di studio
    Termini e Condizioni
    Accessibilità
    Avviso sui cookie
    Informativa sulla privacy dei dati GDPR
    Informativa sulla Privacy
    Termini & Condizioni
    Termini di utilizzo
  • Contattaci
  • Italia
Prodotti » Sistemi di test » Sistemi di prova universali » Serie Industrial - fino a 2000 kN » Sistemi di test statici idraulici » HDX

Strumenti per prove universali modelli HDX Serie Industriale

Contact usView Accessories Catalog
rebar test with extensometer
Closed Crosshead with Manual Crank and Pinion
  • rebar test with extensometer
  • Closed Crosshead with Manual Crank and Pinion
  • Descrizione
  • Accessories
  • Literature
  • CONTATTACI
Sintesi

Progettati per prove ad alta capacità di trazione, compressione, piegatura/flessione e resistenza a taglio, i modelli HDX dispongono di un sistema di pompaggio idraulico che sposta un gruppo pistone per fornire le forze necessarie all'esecuzione delle prove.

Funzionalità
  • Progettazione versatile del telaio che dispone di due spazi di prova in modo che gli utenti possono passare rapidamente da prove di trazione e prove di compressione senza dover rimuovere pesanti dispositivi.
  • La colonna con intagli consente di riposizionare la traversa superiore.
  • Le traverse frontali con lato anteriore aperto agevolano l'inserimento e la rimozione dei lotti per ottimizzare la produttività e la sicurezza.
  • La cella di carico strain-gauge misura direttamente la forza applicata al provino.
  • Il supporto posizionato dall'utente consente di scegliere la collocazione più conveniente per il quadro di produttività e i comandi della pompa idraulica.
  • I circuiti elettronici avanzati provvedono automaticamente al riconoscimento e alla calibrazione dei trasduttori, garantendo l'uso dello strumento corretto e l'affidabilità dei dati.
  • I pacchetti dei software di prova basati su Windows® garantiscono il massimo per semplicità operativa e flessibilità.
  • L'alimentazione a pressione variabile eroga la pressione su richiesta, riducendo la produzione di calore e il consumo di energia durante il funzionamento.

Gamma di modelli
  • 1000HDX - 1000 kN

General Purpose Flexure Fixtures

High Force Universal Testing Machines | 100 kN and Above Testing Capacity

Instron® high force universal testing machines perform tensile, compression, bend, peel, tear, and other mechanical tests on materials and products to ASTM, ISO, and other industry standards. These systems are available in a range of sizes and maximum force capacities. From electromechanical systems used to test high-strength metals and advanced composites to static-hydraulic systems for testing materials used in civil infrastructure, Instron has systems suitable for all applications.

  • Prodotti
  • 8/10/2020
  • 3.9 MB

Industrial Series HDX Models

Featuring a dual test space and long test stroke HDX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.

  • Prodotti
  • 10/7/2013
  • 403.5 KB

Bluehill® Universal Software

Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.

  • Prodotti
  • 2/26/2017
  • 4.4 MB

HDX Static Hydraulic Universal Testing System - Pre-Installation Manual

The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model HDX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).

  • Manuale
  • 7/20/2020
  • 1.0 MB

HDX Static Hydraulic Universal Testing System - Operating Instructions

These instructions describe the function, operation and maintenance for various models of the HDX testing systems. If unsure of your specific model, refer to “System identification” on page 14. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • Manuale
  • 7/20/2020
  • 2.0 MB

HDX Static Hydraulic Universal Testing System - System Concepts Manual

These instructions provide additional information beyond what is necessary to operate the various models of the HDX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • Manuale
  • 7/21/2020
  • 1.8 MB

HDX Static Hydraulic Universal Testing System - Reference Manual

This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of HDX Static Hydraulic Universal Testing Systems.

  • Manuale
  • 7/21/2020
  • 1.6 MB

Il tuo indirizzo e-mail

Inserisci il tuo indirizzo e-mail. Gli indirizzi email devono contenere il simbolo @. Gli indirizzi email possono contenere solo lettere, numeri e questi caratteri speciali: . ! # $% & '* + - / =? ^ _ `{|} ~ I domini dell'indirizzo e-mail possono contenere solo lettere, numeri, punti e trattini (.) (-).

Il tuo messaggio

750 Character Max Inserisci il tuo messaggio Gli indirizzi email possono contenere solo lettere, numeri e questi caratteri speciali: . ! # $% & '* + - / =? ^ _ `{|} ~
Prossimo Sto verificando per vedere se sei già stato un nostro visitatore ...

Ben tornato !

Le tue informazioni di contatto

Inserisci il tuo nome. Please use letters and numbers only.
Inserisci il tuo cognome. Please use letters and numbers only.
Inserisci il tuo paese.
Inserisci la tua società. Please use letters and numbers only.
Inserisci il tuo indirizzo. Please use letters and numbers only.
Inserisci il tuo indirizzo line 2 Please use letters and numbers only.
Inserisci il tuo indirizzo linea 3 Please use letters and numbers only.
Inserisci il tuo paese. Please use letters and numbers only.
Inserisci la tua città. Please use letters and numbers only.
$name
Inserisci il tuo codice postale. Please use numbers only
Inserisci il tuo numero di telefono. Please use numbers only

Si prega di confermare che siete d'accordo con i termini della nostra privacy e con la policy dei cookie al fine di inviare questo modulo.

Accetto i termini e le condizioni di privacy  e la policy dei cookie di Instron

Iscriviti a Instron News!
Seleziona questa casella per ricevere e altre email commerciali provenienti da Instron concentrandosi su prodotti, eventi e molto altro!

Scegliere una opzione di sottoscrizione Uno o più campi obbligatori sono vuoti, per favore completa tutti i campi per continuare. Uno o più campi contengono errori di formattazione, correggere gli errori per continuare. You must agree to Instron's Privacy Policy in order to continue.

Seleziona Paese

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMAZIONI SUI CONTATTI

Via Airauda,
12 10044 Pianezza
TO Italy

Generale:  +39 011 9685 511

COLLEGAMENTI UTILI
  • Sistemi di prova
  • Software
  • Accessori
  • Catalogo
  • Biblioteca
  • Soluzioni di Prova
  • Webinar
  • Casi di studio
  • Eventi
  • Carriere
  • News
  • Glossario
Policies / Legal
  • Informativa sulla privacy e sui cookie
  • Termini di utilizzo
  • Controllo esportazioni
  • Avviso sui dati GDPR
METTITI IN CONTATTO CON NOI
REGISTRATI ALLA NOSTRA NEWSLETTER
INDIRIZZO EMAIL
© Illinois Tool Works Inc. Tutti i diritti riservati.
[email protected]
  • Informativa sulla privacy e sui cookie
  • Termini di utilizzo
  • Controllo esportazioni
  • Avviso sui dati GDPR