Mappa del sito | Instron

Prodotti

Sistemi di test

Accessori ai sistemi di prova

Crash Simulation Accessories;
- 2-Piece Sled;
- Camera Outriggers;
- Low Speed Rear Impact Simulation;
- Pitching;
- Quick Clamping System for Test-Setup-Pallets;
- Side and Pole Impact Simulation;
Camere ambientali e forni;
- Camere ambientali;
  - Electropuls Pull Rod Kit 3117-082;
- Custom Thermal Testing;
- Furnaces;
  - Furnace Testing;
  - Furnace Testing;
    - 1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing;
Afferraggi di trazione;
- Compact Tension Fixtures for Fracture Mechanics;
  - Additional Extension Rod 2780-120;
  - Compact Tension Fixtures for 12.5mm Thick Compact Tension Specimens;
  - Compact Tension Fixtures for 25 mm Thick Compact Tension Specimens ;
  - Compact Tension Fixtures for 50mm Wide Compact Tension Specimens ;
- Pneumatic/Hydraulic Power Supplies;
  - Air Compressor, Portable; Line Voltage: 240 VAC;
- Mechanical - Wedge Grips;
  - 2742-102 - ±1 kN Mechanical Fatigue Grips;
  - 2742-206;
  - 2742-316;
  - 2743-402;
- Prese idrauliche avanzate con azione a cuneo;
  - Fatigue Rated Hydraulic Wedge Grips (+/- 500 kN);
- Mechanical Wedge Lever Action Grips;
  - 150 kN Lever Action Mechanical Wedge Grips;
  - Lever Action, Mechanical Wedge Grips; Capacity: 100 kN;
  - Lever Action, Mechanical Wedge Grips; Capacity: 150 kN;
- Elasticated Fabric;
  - Fabric Loop Grips;
- O Ring Fixtures;
- Hydraulic Wedge Action Grips;
  - Hydraulic Wedge Action Grips 300kN (67,500 lbf);
  - Hydraulic Wedge Action Grips 600kN (135,000 lbf);
  - Hydraulic Wedge Action Grips 1500kN (337,500 lbf);
  - Hydraulic Wedge Action Grips 1000 kN (225,000 lbf);
  - Hydraulic Wedge Action Grips 2000kN (450,000 lbf);
- Pneumatic Wedge Grips;
  - 2742-103 | ±1 kN Pneumatic Fatigue-Rated Wedge Action Grips;
  - 2742-205;
  - 2742-315 ±10 kN ±100 Nm Pneumatic Fatigue Grips;
- Prese di trazione a rulli eccentrici autoserranti;
- Cord Capstan Tensile Grips;
- Fiber Filament Tensile Grips;
- Prese di trazione idrauliche ad azione laterale;
- Prese meccaniche con azione a cuneo;
- Prese di trazione per microelettronica;
  - Micro Pneumatic Grips, Side Action. Rated capacity: 10 N ;
  - Pneumatic Lead Pull Grip. Rated capacity: 500 N ;
- O-Ring Test Fixtures;
- Prese di trazione pneumatiche per corde e filati;
  - High Temperature Pneumatic Cord and Yarn Grips;
- Prese pneumatiche ad azione laterale;
- Prese di trazione ad azione laterale a vite;
- TEMP Wire and Cable Tensile Grips;
- Threaded-End and Button-End Grip Bodies and Inserts;
- Webbing Capstan Tensile Grips;
- Pneumatic Wedge Action Grips;
  - Pneumatic Wedge Action Grips; Capacity: 100 kN;
  - Pneumatic Wedge Action Grips; Capacity: 200 kN;
- Torsion and Axial-Torsion Grips;
  - Axial-Torsion Wedge Grips;
    - 25kN / 100Nm Fatigue Rated Hydraulic Wedge Action Grips for 8874 Machine;
  - Chuck Style;
    - 0.375 in Keyless Drill-Type Chuck Assembly;
    - 0.375 in Keyed Drill-Type Chuck Assembly;
  - Collet Style;
    - Small Collet Grip Assembly, Range 0.8 - 6.3 mm (0.03125 - 0.25 in);
    - Large Collet Grip Assembly, Range 6.3 - 14.25 mm (0.25 in - 0.5625 in) ;
  - Socket Style;
    - 0.5 in Socket Drive Torsion Grips, English;
    - 0.5 in Socket Drive Torsion Grips, Metric;
- Wire and Cable;
  - Pneumatic Wire Tire Cord Grips;
  - Pneumatic Cord and Yarn Grips. Grooved, 5 kN;
  - Pneumatic Wire Tire Cord Grips. Surfalloy, 5 kN;
  - Pneumatic Wire Tire Cord Grips (10 kN);
  - SG-1 Wire Snubbing Grips;
  - SG-2 Cable Snubbing Grips;
  - Pneumatic Action Tire Cord Grips. 10 kN;
Celle di carico;
- Celle di carico statico;
- Torsion Cells;
- Dynamic Fatigue;
  - 2527 Series Bi-axial Dynacell;
  - 2527 Series Dynacell;
Frame Accessories;
- Electromechanical Frame Accessories;
  - Ethernet Frame Interface;
  - Digital Controller Accessories;
- 8800 Series Servohydraulic Test Systems;
- Air Kit per prese pneumatiche;
  - Kit controllo aria compressa (Smart-Close);
- Debris Shields;
- Electropuls All-Electric Dynamic Test Systems ;
- Impact Testing System Accessories;
- Loadframe Support Tables/Bases;
  - Support Table, Heavy Duty; For use with all Dual Column Table Top Models;
  - Base/Extension for Floor Models 4400, 5800 and 5900;
- Static Hydraulic Universal Testing System Frame Accessories;
  - In-Head Wedge Grip Jaws;
  - T-Slotted Tables;
- Hydraulic Grip Pump;
Misurazione e preparazione dei provini;
- Specimen Preparation Systems;
  - Specimen Preparation Notching Machines;
  - Specimen Preparation Punching Machines;
- Specimen Marking Punches;
- Specimen Measurement Devices;
Alignment Fixtures;
Application Specific Fixtures;
- Food;
- Paper and board;
  - TAPPI T541 Internal Bond Strength of Paperboard. Z-Direction Tensile.;
- Wood;
Accessori per il test delle batterie dei veicoli elettrici;
Sistemi e accessori biomedici;
Attrezzature per test su Materiali compositi;
- Composite Tensile Grip Guide;
Piani di compressione;
- Self-Aligning / Spherically Seated Compression Platens;
Accoppiamenti e adattatori;
Custom Accessories;
- Custom Fixtures;
- Grips & Platens;
Electronics and Microelectronics Testing Systems and Accessories;
- Miniature Variable Angle Peel Fixture;
- Stepped Jaw Vice Clamp, Capacity: 500 N (100 lb, 50 kgf);
- Translation and Clamping Stages;
La nostra gamma di estensimetri;
- Averaging Clip-on Extensometer;
  - Averaging Extensometer;
  - Averaging Extensometer;
- Axial Clip-on;
  - Dynamic;
- AUTOX750 Estensimetro automatico;
- Biaxial Clip-on;
- Calibrators for Extensometers;
  - Extensometer Digital Calibrator 0.1 micron resolution;
  - Extensometer Digital Calibrator 1.0 micron resolution;
- Compression Deflectometers (LVDT);
- Crack Opening Displacement (COD) gauges;
  - Crack Opening Displacement (COD) Gauge 5/2;
  - Crack Opening Displacement (COD) Gauge 10/4;
- High-Temperature Extensometers;
- Long Travel Extensometer;
- Estensimetro video senza contatto AVE 2;
  - AVE 2 Dynamic | Low Force Applications;
  - AVE 2 Dynamic | High Force Applications;
- Estensimetro statico assiale a clip;
- Transverse Clip-on Extensometers;
Attrezzature dei dispositivi di fissaggio;
- Supporti dei dispositivi di fissaggio;
- Attrezzature di taglio dei dispositivi di fissaggio;
Attrezzature per flessione;
- 3 and 4 Point Fatigue Flexure Fixtures;
- Apparecchiature per test di piegatura a tre punti;
  - Guided-Bend/Weld Bend Test Fixture; specimen width to 76 mm (3.0 in) ;
  - Cold Bend Testing Fixture for Steel Reinforcement Bar;
Attrezzature per test di peel, attrito e foratura;
- Puncture Test for Packaging Materials ;
- Puncture Fixture per ASTM D5748, D4649;
Piastre di test;
- Piastra di test per componenti;
- Tavole con scanalatura a T;
Catalogo degli accessori per le prove sui materiali – ottava edizione;
- Request a Catalog;

Software di test

Servizio e supporto

Resources

Servizi Professionali Instron

Formazione

Domande poste frequentemente ;

Testing Solutions

ASTM

ISO

Altro

Soluzioni per l'industria

Aerospace

Automotive

Test biomedico

Test sui materiali compositi

Frequently Asked Questions;

Construction and Building Materials Testing

Electronics and Microelectronics

Esecuzione dei test delle batterie

Test sui metalli

Materiali

Test della plastica

Risorse

Blog

Casi di studio

Glossario dei Termini per le Prove sui Materiali

Come fare

Documentazione istituzionale

Calcolatrice di esternalizzazione

Notizie

Tipi di prova

Videos

Webinar

La nostra azienda

Su di Noi

Carriere

Field Service Representative Opening in Greater Toronto, ON;

Contattaci

Iscriviti alla Newsletter Instron;

Torna
In alto