ASTM E190, AWS B4.0 Guided Bend Test of Welds

ASTM E190 bend testing of welds

ASTM E190 describes requirements for guided bend testing of welded materials. The guided bend test on welds is designed primarily for metal plates and pipes and provides a quality control check that helps determine the ductility of the weld and the effectiveness of the welding process. During the bend test, the material containing the weld is supported on both ends by the test fixture, while a load is applied at its center point.

Materials Testing System

For ASTM E290 testing we recommend using an Industrial Series DX or HDX model with Bluehill Universal software and a W-6810 test fixture. This fixture allows for adjustment of the support span and is supplied with various sizes of loading mandrels to accommodate different specimen thicknesses. The loading supports are held together with two tie rods to provide extra stiffness during loading. The DX or HDX Model dual test space load frames allow the bend test fixture to be positioned in the lower compression test space. Any tensile testing can also be accomplished in the upper tensile test space. 




ASTM E190 Test Setup
1) Instron 1000 HDX
2) W-5340 Hydraulic Wedge Grips
3) W-6810 test fixture

 

ASTM E190 system setup
Testing Tips and Tricks

This standard is very focused on the interpretation of the tested specimen. Bluehill Universal can easily be configured with a prompted test that allows the operator to note the condition of the tested specimen and report any cracks that are outlined by the code requirements. Digital calipers can also be interfaced directly to the software for quick, push-button input of crack measurements.

Related Content

Opuscolo sulle macchine di prova universali ad alta forza

I sistemi ad alta forza di Instron includono sistemi di test elettromeccanici e idraulici ad alta capacità per applicazioni di tensione e compressione. Le capacità di forza vanno da 100 kN a 2000 kN.

Modelli HDX della serie industriale

Con uno spazio di test doppio e un lungo stroke test, questi telai idraulici sono disponibili con capacità di 1.000 kN (225.000 lbf) e 1.500 kN (337.500 lbf).

Opuscolo su Bluehill Universal

Bluehill Universal Software è realizzato appositamente per l’interazione touch e un’esperienza utente intuitiva. Scopri test più semplici e più intelligenti con funzionalità quali i metodi di test precaricati, QuickTest in pochi secondi, esportazione di dati migliorata e Instron Connect, una nuova caratteristica che fornisce un collegamento diretto di comunicazione con l’Assistenza. Gli utenti delle versioni precedenti del software come Bluehill 2 e Bluehill 3 possono facilmente aggiornarle alla versione più recente di Bluehill.