ASTM F2606 Three-Point Bending Balloon Expandable Vascular Stents and Stent Systems

ASTM F2606 stent testing 

ASTM F2606 is a testing standard that specifically focuses on characterizing the flexibility of balloon expandable vascular stents and entire stent systems. Balloon expandable vascular stents are critical medical devices used in angioplasty procedures, which typically involve placing a stent in a blocked or damaged artery in order to support the artery and prevent it from clogging over time. These procedures can prevent serious vascular diseases and improve the patient’s quality of life.

During deployment of the device and while in-vivo, vascular stents are under constant flexural, compressive, and torsional forces. Any failure of the device could be extremely dangerous for the patient and result in puncturing the vascular wall.

Materials Testing System

ASTM F2606 uses a materials testing system with a three-point bending fixture to quantify the flexibility of both deployed stents and pre-deployment stent systems. The test can ascertain both the flexural stiffness and conformability of these devices, which is critical in understanding their behavior when placed within the body. Due to the low forces involved, we recommend a 6800 Series testing system with a 100N load cell and a custom flexural fixture designed to meet the specifications of the standard.

ASTM F2606 Test Setup
1) 6800 Series Universal Testing System
2) Bluehill Universal Software
3) 2580 Series Load Cell


ASTM F2606 stent testing

Tips and Tricks

For the most accurate results, ASTM F2606 testing should be performed at average body temperature, 37 degrees Celsius. Consider using Instron's BioBox or BioBath, which create testing environments designed to mimic internal body temperatures and conditions.

Related Content

Opuscolo su Bluehill Universal

Bluehill Universal Software è realizzato appositamente per l’interazione touch e un’esperienza utente intuitiva. Scopri test più semplici e più intelligenti con funzionalità quali i metodi di test precaricati, QuickTest in pochi secondi, esportazione di dati migliorata e Instron Connect, una nuova caratteristica che fornisce un collegamento diretto di comunicazione con l’Assistenza. Gli utenti delle versioni precedenti del software come Bluehill 2 e Bluehill 3 possono facilmente aggiornarle alla versione più recente di Bluehill.

BioBox per test di dispositivi medici a 37  C

BioBox di Instron fornisce un ambiente ad aria controllata a temperatura corporea (37 °C) per test pratici di dispositivi medici e biomateriali.

Prese pneumatiche a immersione ad azione laterale e BioBath a temperatura controllata

Il BioBath di Instron a temperatura controllata permette una simulazione accurata delle condizioni ambientali necessarie per il test biomedico.