ISO 10275:2007 - Esponente di Incrudimento da Trazione
ISO 10275:2007 specifica un metodo per determinare l’esponente di incrudimento da trazione, comunemente chiamato n-value, dei materiali metallici piatti, tipicamente fogli e nastri.
Per calcolare l’n-value, una prova viene eseguita secondo ISO 6892 ed è prodotta una curva sforzo deformazione utilizzando un estensimetro assiale. L’n-value viene calcolato su tutta l’intervallo uniforme di deformazione plastica. Questo è in genere fatto dall'inizio della regione uniforme di incrudimento, dopo eventuali fenomeni di snervamento, fino a poco prima del punto in cui la resistenza di trazione viene calcolata, Rm. Questi calcoli possono essere fatti automaticamente con il software Bluehill (versione completa) o con Partner.
Una prova ISO 10275 viene in genere eseguita come ISO 10113, velocità di deformazione plastica.
Strain Gauge Extensometers | 2630-100
The 2630-100 series of extensometers offers speed of attachment and ease-of-use. The light-weight, rugged cross-brace design eliminates errors caused by physical distortion, while built-in protection ensures that damage is not caused by over-extension.
- Prodotti
- 6/3/2013
- 345.9 KB
AVE 2 Non-Contacting Video Extensometer
The second generation Advanced Video Extensometer (AVE 2) utilizes patented measurement technology in the fastest, most accurate non-contacting strain measurement device commercially available.
- Prodotti
- 1/26/2018
- 1.4 MB
AutoX750 Automatic Contacting Extensometer
The AutoX750 is a high-resolution, long-travel automatic contacting extensometer that is used to determine a variety of calculations including modulus, offset yield, plastic elongation to failure (non-proportional), and r and n values for sheet metals.
- Prodotti
- 8/15/2013
- 1.3 MB
Bluehill® Universal Software
Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.
- Prodotti
- 2/26/2017
- 4.4 MB
6800 Series Universal Testing Systems
Instron 6800 Series Universal Testing Systems provide unparalleled accuracy and reliability. Built on a patent-pending Operator Protect system architecture with an all-new Smart-Close Air Kit and Collision Mitigation features, the 6800 Series makes materials testing simpler, smarter, and safer than ever before.
- Prodotti
- 2/10/2020
- 3.6 MB