インストロン主催の新しいインストロン・コミュニティ・ブログへようこそ。 インストロンならではの最高にフレッシュかつ頭脳明晰で才能豊かな人々の集まりです。 材料科学の世界は果てしなく広く、膨大な業界や材料、課題が対象となっています。そのため、その道の専門家、あるいは材料科学の達人になるために必要なあらゆる知識を1人で備えるのは到底無理です。 コミュニティ・ブログには、専門的ノウハウや体験、アイデアを連携して出し合い、最も正確で関連のある情報をタイミング良く読者に提供してくれる豊富な人材が集まっています。

自己紹介、意見、そして自身の体験についてお話しください。 インストロン・コミュニティでお待ちしています。

Hobas Pipe USA Installs Giant Custom-Built Instron Frame

HOBAS® Pipe USA, a producer and supplier of fiberglass-reinforced polymer mortar pipe systems, produces pipe and pipecoupling products in a wide range of sizes. Worldwide population growth has increased the demand for bigger water supply and sewage pipes. Consequently, the pipe diameter range was set to increase beyond the size capability of their current testing equipment. They needed a system that could test their full range of products and they turned to Instron for the solution. The resulting testing system was so big that it was installed out in the open and the test building was constructed around the frame.

Posted On Mar 06, 2012 03:10 PM

Question from a Customer

Q. What is the resolution and accuracy of your Smart Rheo load cell?

Posted On Mar 06, 2012 03:10 PM

Selecting a Pressure Transducer for Your Capillary Rheometer

It is common to refer to pressure transducers by their full-scale range in megapascals (1 MPa is 145 psi). The accuracy is 0.25% of the full scale of the pressure transducer. To obtain the highest quality data, the recommended minimum pressure is about 10 times the accuracy and the recommended maximum pressure is about 90% of the full-scale range.

Posted On Mar 06, 2012 03:10 PM

A Very Deep Investment

The challenges of testing Fiber Reinforced Concrete (FRC) go well beyond what we would normally think of with respect to concrete testing. The difference lies in the fact that most of the valuable information from an FRC test comes after the concrete fails. The ability of FRC to resist crack growth after the initial crack is determined by measuring the toughness (typically area under the curve) of the sample as it is deflected well past the first crack. All of these tests must be run under servo-control and one of the more common tests must be run using the measured beam deflection as the servo feedback. This can be very challenging as the specimen goes from being very stiff to very compliant after the first crack.

Posted On Mar 01, 2012 03:10 PM