Tensile Holders for Shoulder-End and Button-Head Specimens, 300kN, 1.5-12 in RHf
W-5158-3 | Tensile Holders for Shoulder-End and Button-head Specimens
300kN, ASTM E8, A370.
One set of 300kN Split Sleeve Insert Holders for tensile testing of shoulder-end and button-head specimens, prepared to the Instron standard specimen machining diagram.
This set of insert holders requires at least one set of inserts to perform a test. Choose from W-5158-* selections that follow.
Static Capacity: 300kN (67,500 lbf)
Frame attachment: 1.5-12 inch RHf
Effective Length: 83mm (3.3 inch)
- At minimum one set of inserts is required for use with the insert holder to test.
- Customer must confirm specimen dimensions with Instron Standard specimen drawing 231249-2.
- Any non-standard specimens will require a set of W-5158-X custom inserts.
- To install the tensile holders onto the load frame, a set of tension alignment adapters is required.
|アクセサリ長さ||83 mm (3.3 in)|
|荷重容量||300 kN (67,500 lbf)|
|下側取り付け||1.5-12 in RHf|
|静的 もしくは 疲労の速度||Static|
|上側取り付け||1.5-12 in RHf|