Tensile Holders for Shoulder-End and Button-Head Specimens, 600 kN
W-5159 | Tensile Holders for Shoulder-End and Button-head Specimens, 600kN
One set of 600kN Split Sleeve Insert Holders for tensile testing of shoulder-end and button-head specimens, prepared to the Instron standard specimen machining diagram
This set of insert holders requires at least one set of inserts to perform a test. Choose from W-5159-* selections that follow.
Static Capacity: 600kN (135,000 lbf)
Frame attachment: M48x2p RHf (Type II RH)
Effective Length: 127mm (5.0 inch)
- At minimum one set of inserts is required for use with the insert holder to test
- Customer must confirm specimen dimensions with Instron Standard specimen drawing
- Any non-standard specimens will require a set of W-5159-X custom inserts
- To install the tensile holders onto the load frame, a set of tension alignment adapters is required
|荷重容量||600 kN (135,000 lbf)|
|静的 もしくは 疲労の速度||Static|
|上側取り付け||M48 x 2p RH|
Instron® Split Insert Tensile Grips are designed for safe, high-volume production testing of shoulder-end or button-head machined specimens. Engineered with an operator focus, the split insert style tensile grips are easy to install, offer quick change inserts for standard specimen sizes, and promote efficient testing of a wide range of metals and alloys.
- 1.5 MB