The Collet Style grips are threaded into or bolted to the output shaft and/or torque cell of MT series frames.
The collet grips use a split collet design that, when manually tightened, provides nearly uniform clamping pressure on the specimen. Collet Style grips accept a smaller range of specimen diameters than chuck style grips (W-MT01 Series) but can withstand higher torsional forces. Both small and large collet grip assemblies are available for gripping a range of specimens. Adapters are included to attach collet grips to the MT series frames.
- Types of Loading: torsion
- Specimen Material: various
- Specimen Types: round
|Large Collet Grip Assembly, Range 6.3 - 14.25 mm (0.25 in - 0.5625 in)||W-MT02-B|
|Small Collet Grip Assembly, Range 0.8 - 6.3 mm (0.03125 - 0.25 in)||W-MT02|