DX モデル

インストロンの高容量万能材料試験機は、ASTM、ISO、その他の産業規格に向けて、材料や製品の引張、圧縮、曲げ、剥離、引き裂き、その他の機械的試験を行います。これらのシステムは、さまざまなサイズと荷重容量からお選びいただけます。

• 製品
• 3/4/2021
• 1.9 MB

Featuring a dual test space and single footprint, DX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.

• 製品
• 9/7/2017
• 0.6 MB

Bluehill Universalは、材料試験を全てタッチ操作でスムーズに行える設計。ユーザビリティーを重視した斬新な縦方向の画面レイアウトで、操作パネル上に展開される試験作業空間を大変使いやすく設計しました。この大型画面は統合されたコントローラーを備え、直観的な操作が可能なので、試験経験の個人差に影響を受けず、操作用トレーニングに時間をかけず、今までにない迅速さで試験を始めることができます。

• 製品
• 2/26/2017
• 2.4 MB

The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model DX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).

• マニュアル
• 7/14/2020
• 1.0 MB

These instructions describe the function, operation and maintenance for various models of the DX testing systems. If unsure of your specific model, refer to “System identification” on page 14. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

• マニュアル
• 7/14/2020
• 2.0 MB

This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of DX Static Hydraulic Universal Testing Systems.

• マニュアル
• 7/20/2020
• 1.7 MB

These instructions provide additional information beyond what is necessary to operate the various models of the DX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

• マニュアル
• 7/14/2020
• 1.8 MB