ISO 11339 T-Peel Test Flexible to Flexible Bonded Assemblies

For peel tests, it is critical to use a high data acquisition rate to capture all peaks and troughs in order to ensure all test events are represented in the results. Too low of a bandwidth may “dull” the results and lead to artificially low peel strength values. For this reason, we recommend an Instron 6800 series test frame, which enables a data capture rate of up to 5 kHz. System capacity will depend on the strength of the adhesive; however, many tests to this standard will fall below 5 kN capacity, making a single column frame (68SC) ideal. If the adhesive requires a higher capacity system, Instron’s dual column table model frames are available up to 50 kN.

Pneumatic side action grips prevent specimen slippage by maintaining a constant clamping pressure throughout testing. They are available in capacities from 50N to 10kN, appropriate for the full range of adhesive strengths. Both advanced side action grips and pneumatic grips feature quick-change jaw faces that can be easily changed to accommodate different materials.

• When performing an ISO 11339 test, the two adherends do not need to be the same material or thickness. However, if one adherend is more flexible than the other, attach the less flexible one to the moveable (top) grip.

• Bluehill Universal software comes with with one free application module upon purchase. Each module contains pre-configured test methods and supporting documentation to assist with testing to various standards. ISO 11339 is included as part of the Adhesives module.