Autoinjector Testing System: Device Changeover and System Alignment

The Instron® Autoinjector Testing System’s fixtures are designed to minimize side loading during cap removal and support common industry device geometries, while offering flexibility to easily accommodate customized devices.

Variability in cap removal force measurements is directly impacted by system alignment and insert design. Instron’s simplified cap removal fixture consists of a common base and device-specific inserts that are easily interchangeable. The base is aligned to the grips and crosshead and does not need re-alignment unless it is removed. To accommodate a new device, the insert is simply changed out using three thumb screws.

System Alignment: In the instances where alignment of the Instron system is required, the alignment procedure, using the included fixture, is simple and repeatable.

Cap Removal Insert: While a range of inserts for the common commercially available autoinjector devices is supplied with the system, the design simplicity makes it easy to machine new inserts for customized devices.

Related Video(s)

Autoinjector Testing System

Instron’s latest generation Autoinjector Testing System can perform full functionality testing on a wide range of drug delivery devices — such as needle shield and button-activated devices, as well as safety syringes.

Autoinjector Testing System: Root Cause Analysis

Instron’s Autoinjector Testing System uses a high-resolution video camera, along with the machine vision camera, to provide critical visuals to aid in root cause analysis when a device failure occurs.

Autoinjector Testing System: Simple Test Methods

Bluehill Universal uses simplified test types that empower users to develop and change method parameters with ease, while offering the flexibility to readily accommodate future devices without requiring Instron’s support.

CT6 Cobot Configured for Auto-Injector Testing

Instron’s® CT6 can be configured as an automated solution for the required testing of auto-injection devices — providing the benefits of automation without the additional complexity of a fully automated testing system. Designed to accommodate auto-injectors with varying geometries, this system allows you to measure a variety of critical data points including cap removal, activation force, injection time, injection mass/volume, and lock out force of the needle shield — all within a single test method.

Wstecz
do góry