BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Instron - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.instron.com/pt-br/
X-WR-CALDESC:Eventos para Instron
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20260308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20261101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20270314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20271107T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260624T083000
DTEND;TZID=America/New_York:20260624T160000
DTSTAMP:20260616T193235Z
CREATED:20260515T120925Z
LAST-MODIFIED:20260616T193235Z
UID:10000253-1782289800-1782316800@www.instron.com
SUMMARY:Introdução ao Desenvolvimento de Métodos de Ensaio no Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-introduction-to-test-method-development-06-24-2026/
LOCATION:Fort Worth\, TX\, Fort Worth\, TX\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/high-wycombe-classroom-with-instructor.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260625T083000
DTEND;TZID=America/Chicago:20260625T160000
DTSTAMP:20260617T121143Z
CREATED:20260513T194112Z
LAST-MODIFIED:20260617T121143Z
UID:10000606-1782376200-1782403200@www.instron.com
SUMMARY:Desenvolvimento Avançado de Métodos de Ensaio Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-advanced-test-method-development-3/
LOCATION:Fort Worth\, TX\, Fort Worth\, TX\, United States
CATEGORIES:Treinamento
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260626T083000
DTEND;TZID=America/Chicago:20260626T160000
DTSTAMP:20260616T201407Z
CREATED:20260515T120932Z
LAST-MODIFIED:20260616T201407Z
UID:10000496-1782462600-1782489600@www.instron.com
SUMMARY:Desenvolvimento de Métodos com TestProfiler do Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-testprofiler-method-development-06-26-2026/
LOCATION:Fort Worth\, TX\, Fort Worth\, TX\, United States
CATEGORIES:Treinamento
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260629T100000
DTEND;TZID=America/New_York:20260629T110000
DTSTAMP:20260716T140936Z
CREATED:20260616T154322Z
LAST-MODIFIED:20260716T140936Z
UID:10000499-1782727200-1782730800@www.instron.com
SUMMARY:Do protótipo ao desempenho: ensaios mecânicos e qualificação de fadiga na manufatura aditiva
DESCRIPTION:A manufatura aditiva (impressão 3D) evoluiu da prototipagem rápida para a produção de peças funcionais e de suporte de carga em diversos setores. À medida que a adoção cresce\, aumenta também a necessidade de ensaios mecânicos confiáveis e repetíveis para garantir o desempenho e a conformidade.  \nNesta sessão\, você aprenderá:\n• O que é manufatura aditiva?\n• Principais tecnologias de manufatura aditiva\n• Por que a fadiga é importante na manufatura aditiva\n• Comportamento de fadiga de peças fabricadas por manufatura aditiva \nRegistre-se agora
URL:https://www.instron.com/pt-br/event/from-prototype-to-performance-mechanical-testing-and-fatigue-qualification-in-additive-manufacturing/
LOCATION:Virtual
CATEGORIES:Webinars
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/instron-engineer-mechanical-testing-additive-manufacturing-lab.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260713T090000
DTEND;TZID=America/New_York:20260713T160000
DTSTAMP:20260617T121733Z
CREATED:20260513T193302Z
LAST-MODIFIED:20260617T121733Z
UID:10000677-1783933200-1783958400@www.instron.com
SUMMARY:Introdução aos Ensaios Estáticos de Materiais
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/introduction-to-static-materials-testing-3/
LOCATION:Virtual
CATEGORIES:Treinamento
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260713T100000
DTEND;TZID=America/New_York:20260713T110000
DTSTAMP:20260716T135940Z
CREATED:20260616T155253Z
LAST-MODIFIED:20260716T135940Z
UID:10000153-1783936800-1783940400@www.instron.com
SUMMARY:Projetando para Durabilidade: Desempenho de Fadiga de Componentes de Manufatura Aditiva na Indústria
DESCRIPTION:A manufatura aditiva (MA) está avançando rapidamente para aplicações industriais funcionais. Explore o impacto nas indústrias aeroespacial\, automotiva e biomédica.  \nNesta sessão\, você aprenderá:\n• Por Que a Fadiga É Especialmente Crítica para Aplicação Industrial de Peças Fabricadas Aditivamente\n• Impacto da Variabilidade Impulsionada pelo Processo nos Dados de Fadiga\n• Como a Instron Oferece Suporte a Testes de Fadiga para Peças Fabricadas Aditivamente \nRegistre-se Agora
URL:https://www.instron.com/pt-br/event/designing-for-durability-fatigue-performance-of-additive-manufacturing-components-in-industry/
LOCATION:Virtual
CATEGORIES:Webinars
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/directed-energy-deposition-metal-additive-manufacturing-process.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260714T090000
DTEND;TZID=America/New_York:20260714T163000
DTSTAMP:20260616T195916Z
CREATED:20260515T120936Z
LAST-MODIFIED:20260616T195916Z
UID:10000377-1784019600-1784046600@www.instron.com
SUMMARY:Introdução ao Desenvolvimento de Métodos de Ensaio no Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-introduction-to-test-method-development-07-14-2026/
LOCATION:Virtual
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/dogbone-with-course-materials.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260715T090000
DTEND;TZID=America/New_York:20260715T163000
DTSTAMP:20260617T121058Z
CREATED:20260513T194113Z
LAST-MODIFIED:20260617T121058Z
UID:10000597-1784106000-1784133000@www.instron.com
SUMMARY:Desenvolvimento Avançado de Métodos de Ensaio Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-advanced-test-method-development-4/
LOCATION:Virtual
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/high-wycombe-classroom-training.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260716T090000
DTEND;TZID=America/New_York:20260716T163000
DTSTAMP:20260616T194522Z
CREATED:20260515T120940Z
LAST-MODIFIED:20260616T194522Z
UID:10000337-1784192400-1784219400@www.instron.com
SUMMARY:Desenvolvimento de Métodos no Bluehill® Universal TestProfiler
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-testprofiler-method-development-07-16-2026/
LOCATION:Virtual
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2025/03/instron-training-hp.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260722T110000
DTEND;TZID=America/New_York:20260722T120000
DTSTAMP:20260618T180502Z
CREATED:20260618T180502Z
LAST-MODIFIED:20260618T180502Z
UID:10000687-1784718000-1784721600@www.instron.com
SUMMARY:Qual extensômetro é adequado para sua aplicação?
DESCRIPTION:Selecionar o extensômetro adequado é uma das decisões mais importantes que um laboratório de ensaios de materiais pode tomar\, mas a variedade de opções disponíveis pode ser esmagadora. Este webinar simplifica a complexidade ao conduzir os participantes por todo o panorama de extensômetros\, desde sistemas de classificação fundamentais até a correspondência de aplicações do mundo real. Seja seu laboratório avaliando sua configuração atual ou considerando novas tecnologias de extensômetros\, esta sessão fornecerá uma estrutura prática para tomar decisões confiantes e orientadas por aplicações — juntamente com insights da Covalent\, um laboratório independente de ensaios de materiais baseado no Vale do Silício\, compartilhando sua experiência usando o extensômetro de vídeo AVE3 da Instron ao ensaiar materiais para seus clientes.   \nTópicos: \n\nO que são extensômetros\, por que são necessários para ensaios precisos de materiais e como os padrões de classificação se conectam aos requisitos específicos de sua aplicação\nAs principais diferenças entre tipos de extensômetros de contato — incluindo clip-on\, longo curso\, contato automático e strain gauges — e os cenários onde cada um se destaca\nComo funcionam os extensômetros ópticos sem contato e as vantagens que oferecem em termos de precisão\, proteção do corpo de prova e eficiência do fluxo de trabalho\nComo avaliar opções de extensômetros em relação às demandas de ensaio\, materiais e necessidades de produtividade de seu laboratório\nUma perspectiva do cliente da Covalent sobre a adoção de extensometria de vídeo em uma variedade de aplicações de materiais\, incluindo exemplos de filmes finos e folhas em ensaios de baterias\, e os ganhos resultantes em repetibilidade\, produtividade e redução da variabilidade do operador\n\nRegistre-se agora
URL:https://www.instron.com/pt-br/event/which-extensometer-is-right-for-your-application/
LOCATION:Virtual
CATEGORIES:Webinars
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/06/instron-ave3-advanced-video-extensometer-used-for-full-field-strain-mapping.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260825T080000
DTEND;TZID=America/New_York:20260825T163000
DTSTAMP:20260617T121340Z
CREATED:20260513T193311Z
LAST-MODIFIED:20260617T121340Z
UID:10000630-1787644800-1787675400@www.instron.com
SUMMARY:Introdução aos Ensaios Estáticos de Materiais
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/introduction-to-static-materials-testing-6/
LOCATION:Sede Corporativa da Instron\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2025/10/Training_Stock_1.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Sede Corporativa da Instron 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260826T080000
DTEND;TZID=America/New_York:20260826T163000
DTSTAMP:20260616T195745Z
CREATED:20260515T133034Z
LAST-MODIFIED:20260616T195745Z
UID:10000366-1787731200-1787761800@www.instron.com
SUMMARY:Bluehill® Universal: Introdução ao desenvolvimento de métodos de ensaio
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-introduction-to-test-method-development-08-26-2026/
LOCATION:Sede Corporativa da Instron\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2024/06/testprofiler-with-icon.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Sede Corporativa da Instron 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260827T080000
DTEND;TZID=America/New_York:20260827T163000
DTSTAMP:20260617T121002Z
CREATED:20260514T192454Z
LAST-MODIFIED:20260617T121002Z
UID:10000586-1787817600-1787848200@www.instron.com
SUMMARY:Desenvolvimento Avançado de Métodos de Ensaio Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-advanced-test-method-development-08-27-2026/
LOCATION:Sede Corporativa da Instron\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2025/10/Training_Stock_1.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Sede Corporativa da Instron 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260828T080000
DTEND;TZID=America/New_York:20260828T163000
DTSTAMP:20260616T201304Z
CREATED:20260515T133038Z
LAST-MODIFIED:20260616T201304Z
UID:10000490-1787904000-1787934600@www.instron.com
SUMMARY:Desenvolvimento de métodos do TestProfiler do Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-testprofiler-method-development-08-28-2026/
LOCATION:Sede Corporativa da Instron\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Treinamento
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Sede Corporativa da Instron 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260915T083000
DTEND;TZID=America/Los_Angeles:20260915T160000
DTSTAMP:20260617T121250Z
CREATED:20260513T193313Z
LAST-MODIFIED:20260617T121250Z
UID:10000625-1789461000-1789488000@www.instron.com
SUMMARY:Introdução aos Ensaios Estáticos de Materiais
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/introduction-to-static-materials-testing-7/
LOCATION:Irvine\, CA\, Irvine\, CA\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-projector.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260916T083000
DTEND;TZID=America/Los_Angeles:20260916T160000
DTSTAMP:20260616T200608Z
CREATED:20260515T133039Z
LAST-MODIFIED:20260616T200608Z
UID:10000416-1789547400-1789574400@www.instron.com
SUMMARY:Bluehill® Universal Introdução ao Desenvolvimento de Métodos de Teste
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-introduction-to-test-method-development-09-16-2026/
LOCATION:Irvine\, CA\, Irvine\, CA\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-raising-hand-classroom-with-instructor.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260917T083000
DTEND;TZID=America/Los_Angeles:20260917T160000
DTSTAMP:20260617T120426Z
CREATED:20260514T192456Z
LAST-MODIFIED:20260617T120426Z
UID:10000519-1789633800-1789660800@www.instron.com
SUMMARY:Desenvolvimento Avançado de Métodos de Ensaio Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-advanced-test-method-development-09-17-2026/
LOCATION:Irvine\, CA\, Irvine\, CA\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-with-touchscreen-instructor-norwood-classroom.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260918T083000
DTEND;TZID=America/Los_Angeles:20260918T160000
DTSTAMP:20260616T201138Z
CREATED:20260515T133044Z
LAST-MODIFIED:20260616T201138Z
UID:10000475-1789720200-1789747200@www.instron.com
SUMMARY:Desenvolvimento de métodos do TestProfiler do Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-testprofiler-method-development-09-18-2026/
LOCATION:Irvine\, CA\, Irvine\, CA\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-instructor-big-projector.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260921T090000
DTEND;TZID=America/New_York:20260921T163000
DTSTAMP:20260617T121202Z
CREATED:20260513T193314Z
LAST-MODIFIED:20260617T121202Z
UID:10000612-1789981200-1790008200@www.instron.com
SUMMARY:Introdução aos Ensaios Estáticos de Materiais
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/introduction-to-static-materials-testing-8/
LOCATION:Virtual
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2020/10/free-training-homepage-news.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260922T090000
DTEND;TZID=America/New_York:20260922T163000
DTSTAMP:20260616T200305Z
CREATED:20260515T133046Z
LAST-MODIFIED:20260616T200305Z
UID:10000398-1790067600-1790094600@www.instron.com
SUMMARY:Bluehill® Universal: Introdução ao desenvolvimento de métodos de ensaio
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-introduction-to-test-method-development-09-22-2026/
LOCATION:Virtual
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/dogbone-with-course-materials.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260923T090000
DTEND;TZID=America/New_York:20260923T163000
DTSTAMP:20260617T120932Z
CREATED:20260514T192457Z
LAST-MODIFIED:20260617T120932Z
UID:10000583-1790154000-1790181000@www.instron.com
SUMMARY:Desenvolvimento Avançado de Métodos de Ensaio Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-advanced-test-method-development-09-23-2026/
LOCATION:Virtual
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2024/12/hwservicetraining-400x250-1.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260924T090000
DTEND;TZID=America/New_York:20260924T163000
DTSTAMP:20260616T194136Z
CREATED:20260515T133048Z
LAST-MODIFIED:20260616T194136Z
UID:10000300-1790240400-1790267400@www.instron.com
SUMMARY:Desenvolvimento de Métodos com TestProfiler do Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-testprofiler-method-development-09-24-2026/
LOCATION:Virtual
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2020/10/free-training-homepage-news.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260929T080000
DTEND;TZID=America/New_York:20260929T163000
DTSTAMP:20260616T192648Z
CREATED:20260518T173844Z
LAST-MODIFIED:20260616T192648Z
UID:10000181-1790668800-1790699400@www.instron.com
SUMMARY:Introdução aos Ensaios Estáticos de Materiais
DESCRIPTION:In this one-day course\, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties\, different types of testing\, stress/strain test curves\, modulus\, yield\, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile\, compressive\, flexural\, and peel tests to learn to interpret test curves and calculated results. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUnderstand basic materials testing terminology\, theory and concepts\nUnderstand typical force/displacement test curves and be able to distinguish between different types of curves\nDo’s and Dont’s when running typical tensile\, compression\, flexure\, and peel tests\nLearn good testing procedures when using a computerized testing instrument to perform tension\, compression\, flexural and peel testing\nLearn the importance of system calibration for data accuracy\nUnderstand specimen geometry and the importance of specimen dimensions\nCalculate stress\, strain\, elongation\, modulus\, offset yield\, and other advanced calculations\nBe able to interpret test curves and to label major points and results\nUnderstand different types of strain measurements and devices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/introduction-to-static-materials-testing-09-29-2026/
LOCATION:Sede Corporativa da Instron\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-projector.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Sede Corporativa da Instron 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260929T090000
DTEND;TZID=Europe/London:20260929T163000
DTSTAMP:20260616T192957Z
CREATED:20260515T133049Z
LAST-MODIFIED:20260616T192957Z
UID:10000220-1790672400-1790699400@www.instron.com
SUMMARY:Introdução ao Desenvolvimento de Métodos de Ensaio no Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nBook This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-introduction-to-test-method-development-09-29-2026/
LOCATION:Sede Europeia da Instron\, Coronation Road\, High Wycombe\, Buckinghamshire\, HP12 3SY\, United Kingdom
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/high-wycombe-classroom-with-instructor.jpg
ORGANIZER;CN="Treinamento Instron - Europa":MAILTO:traininguk@Instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260930T080000
DTEND;TZID=America/New_York:20260930T163000
DTSTAMP:20260616T193909Z
CREATED:20260515T135730Z
LAST-MODIFIED:20260616T193909Z
UID:10000278-1790755200-1790785800@www.instron.com
SUMMARY:Introdução ao Desenvolvimento de Métodos de Teste no Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the basic tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of basic Test Method development. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nRun tests\, generate graphs\, and produce test reports\nSetup calculations and test results\nCreate\, save and retrieve test method and same data files\nSetup test control parameter\nExport results and raw data\nStreamline your workflow using Bluehill best practices\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-introduction-to-test-method-development-09-30-2026/
LOCATION:Sede Corporativa da Instron\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-with-instructor-norwood-classroom.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Sede Corporativa da Instron 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260930T090000
DTEND;TZID=Europe/London:20260930T163000
DTSTAMP:20260617T120821Z
CREATED:20260514T192458Z
LAST-MODIFIED:20260617T120821Z
UID:10000571-1790758800-1790785800@www.instron.com
SUMMARY:Desenvolvimento Avançado de Métodos de Ensaio Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nBook This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-advanced-test-method-development-09-30-2026/
LOCATION:Sede Europeia da Instron\, Coronation Road\, High Wycombe\, Buckinghamshire\, HP12 3SY\, United Kingdom
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/classroom-with-projector.jpg
ORGANIZER;CN="Treinamento Instron - Europa":MAILTO:traininguk@Instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261001T080000
DTEND;TZID=America/New_York:20261001T163000
DTSTAMP:20260616T193037Z
CREATED:20260515T135732Z
LAST-MODIFIED:20260616T193037Z
UID:10000227-1790841600-1790872200@www.instron.com
SUMMARY:Desenvolvimento Avançado de Métodos de Ensaio no Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill Universal. Using a hands-on approach\, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nUtilize the Expression Builder function through the method development process\nUnderstand calculation and graphical domains\nUnderstand virtual measurements utilization\nSetup custom transducers\nUnderstand the features on Instron Connect\nSetup software Security and login settings\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-advanced-test-method-development-10-01-2026/
LOCATION:Sede Corporativa da Instron\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2025/10/Training_Stock_1.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Sede Corporativa da Instron 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261001T090000
DTEND;TZID=America/New_York:20261001T163000
DTSTAMP:20260616T192903Z
CREATED:20260515T135733Z
LAST-MODIFIED:20260616T192903Z
UID:10000210-1790845200-1790872200@www.instron.com
SUMMARY:Desenvolvimento de Métodos TestProfiler do Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nBook This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-testprofiler-method-development-10-01-2026/
LOCATION:Sede Europeia da Instron\, Coronation Road\, High Wycombe\, Buckinghamshire\, HP12 3SY\, United Kingdom
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/student-holding-dogbone-with-course-materials.jpg
ORGANIZER;CN="Treinamento Instron - Europa":MAILTO:traininguk@Instron.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261001T110000
DTEND;TZID=America/New_York:20261001T120000
DTSTAMP:20260716T141057Z
CREATED:20260615T132408Z
LAST-MODIFIED:20260716T141057Z
UID:10000426-1790852400-1790856000@www.instron.com
SUMMARY:Sinais Vitais: Avaliando os Plásticos por Trás de Dispositivos Médicos
DESCRIPTION:Os ensaios mecânicos desempenham um papel fundamental para demonstrar que os plásticos usados em embalagens biomédicas\, componentes e montagens de dispositivos são adequados ao uso pretendido. Nesta sessão\, vamos nos concentrar nos aspectos dos ensaios mecânicos que são exclusivos da indústria biomédica — especialmente os processos\, controles e práticas de documentação necessários para apoiar ensaios em conformidade em ambientes regulamentados.  \nO que você vai aprender\n • Como os ensaios mecânicos são aplicados a embalagens de uso único\, componentes e conectores comumente encontrados em aplicações biomédicas\n • Considerações práticas para ensaiar dispositivos e montagens complexos\, em que abordagens tradicionais de ensaio podem não se aplicar diretamente\n • Como manter a conformidade por meio de documentação adequada\, estratégias de validação e práticas de ensaio alinhadas a ambientes regulamentados pela FDA \nPara quem é\nEngenheiros biomédicos\, profissionais de qualidade e regulatórios\, fabricantes de dispositivos e equipes de laboratório responsáveis por ensaios mecânicos em ambientes biomédicos ou de dispositivos médicos regulamentados. \nPor que a Instron\nA Instron combina profundo conhecimento em ensaios de plásticos com ampla experiência no suporte a laboratórios biomédicos. Nesta sessão\, compartilharemos orientações práticas para melhorar a consistência\, reduzir a variação dependente do operador e fortalecer os processos de ensaio para apoiar fluxos de trabalho de ensaios mecânicos em conformidade e bem documentados.  \nInscreva-se agora
URL:https://www.instron.com/pt-br/event/vital-signs-evaluating-the-plastics-behind-medical-devices/
LOCATION:Virtual
CATEGORIES:Webinars
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/06/plastics-in-medical-devices-webinar.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261002T080000
DTEND;TZID=America/New_York:20261002T163000
DTSTAMP:20260616T201137Z
CREATED:20260515T135735Z
LAST-MODIFIED:20260616T201137Z
UID:10000474-1790928000-1790958600@www.instron.com
SUMMARY:Desenvolvimento de Métodos com TestProfiler do Bluehill® Universal
DESCRIPTION:In this one-day course\, students will work with a certified Instron training instructor to explore the various tools and functions of Bluehill Universal’s powerful TestProfiler feature. Using a hands-on approach\, the instructor will guide students through a series of realistic projects designed to prepare the student for the unique demands of his or her laboratory. Download the course outline to see the full program. \nAfter completing this course\, you will be able to: \n\nDesign your own TestProfiler tests\nCreate\, load\, and save your own profiler waveforms\nUse enhanced load or strain control\nCreate different waveforms – absolute/relative ramps\, triangle\, holds and more\nSelect results from specific test segments\nAugment test sequences with Actions and Events\nUtilize domain expressions based on waveform\n\nRegister for This Course
URL:https://www.instron.com/pt-br/event/bluehill-universal-testprofiler-method-development-10-02-2026/
LOCATION:Sede Corporativa da Instron\, 825 University Ave\, Norwood\, MA\, 02062-2643\, United States
CATEGORIES:Treinamento
ATTACH;FMTTYPE=image/jpeg:https://www.instron.com/wp-content/uploads/2026/05/high-wycombe-classroom-with-instructor.jpg
ORGANIZER;CN="Treinamento Instron - Am%C3%A9rica do Norte":MAILTO:training_center@instron.com
GEO:42.20390177;-71.17161315
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Sede Corporativa da Instron 825 University Ave Norwood MA 02062-2643 United States;X-APPLE-RADIUS=500;X-TITLE=825 University Ave:geo:-71.17161315,42.20390177
END:VEVENT
END:VCALENDAR