1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing
3117-200 | 1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing
Features:
- 90mm bore diameter, 358mm overall height (furnace only)
- Three-zone split furnace configuration with durable embedded heating elements
- 1000 °C (1832 °F) nominal maximum specimen temperature (dependent on load string configuration)
- 300 - 600 °C (572 - 1112 °F) nominal minimum specimen temperature (dependent on load string configuration and test conditions)
- High efficiency insulation (refractory ceramic fibre free)
- Extensometer cut-out, full width, 76 mm high
- Extensometer slot 40 mm high x 15 mm wide
- Nominal power rating 3kW
Includes side port insulation plug for blanking extensometer slot.
Requires temperature controller with thermocouples, support brackets, and top/bottom insulating port plugs (not included)
| Accessory Diameter | 235 mm (9.25 in) |
|---|---|
| Temperature Rating | 1000°C (1832°F) |
- 1000 deg.C Reverse Stress Pullrods
- Water Cooled Adapter
- Water Cooled Adapter and Alignment Rings
- High Temperature Clevis Grips
- Axial Extensometer; 12.5mm Gauge Length +20% -10% Capacity
- Axial Extensometer; 12.5mm Gauge Length, +20% / -10% Capacity
- Strain Gauge Extensometer; 25mm Gauge Length, +10% -5% Capacity
- High-Temp Extensometer; 25mm Gauge Length, +10% -5% Capacity
- Leaf Spring Mounting for 2632-054, -055, 056 and -057 Extensometers