Instron
  • Back
  • Home
  • Produtos
    SISTEMAS DE ENSAIOS
    Sistemas Universais de Ensaios
    Durabilidade estrutural
    Sistemas de Ensaios Automatizados
    Sistemas de Ensaios Dinâmicos e de Fadiga
    Crash Simulation
    Máquinas para Ensaios de Torção
    Reômetros e Equipamento para Melt Flow
    Equipamentos para ensaios de impacto pendular ou por queda (Drop Tower)
    HDT e Vicat
    Equipamentos Fora de Produção
    ACESSÓRIOS
    Software
    Células de carga
    Adesão, Atrito, Perfuração
    Câmaras Ambientais e Fornos
    Garras de Tração
    Dispositivos para Flexão
    Pratos de Compressão
    Dispositivos para Área Farmacêutica e Biomédica
    Extensômetros
    Células de carga
    Acessórios de ensaio para eletrônicos e microeletrônica
    Medição de Corpos de Prova e Preparação
    Todos os acessórios
  • Soluções Industriais
    Normas ASTM Normas ISO Outros padrões
    POR INDÚSTRIA
    Automotivo
    Baterias
    Biomédica
    Eletrônica
    materiais
    Compósitos
    Metais
    Plásticos
  • RECURSOS
    Videos
    Webinários
    Eventos
    Notícias
    Blogue
    Como
    Estudos de caso
    Tipos de Ensaio
    Glossário
    Biblioteca de materiais
    Localizador de número de série
    Manuais
  • Serviço e suporte
    Instron Remote Technical Support CICLO DE VIDA DE PRODUTOS TREINAMENTO
    SERVIÇOS
    Calibração e verificação
    Assistência de implementação da Instron
    SUPORTE TÉCNICO
    Perguntas frequentes
    Serviços de atualização de software
    Manuais
    Localizador de número de série
  • Nossa empresa
    CARREIRAS ASSINE NOSSOS BOLETINS DE NOTÍCIAS
    QUEM SOMOS
    Nossa história
    Unidades
    Acreditações e certificados
    Privacidade e Termos
    Acessibilidade
    Aviso de Cookie
    Aviso de privacidade de dados GDPR
    Controle de exportação
    Notificação de privacidade
    termos e Condições
    Termos de uso
  • Fale conosco
  • Brasil
PRODUTOS » Acessórios de Ensaios » Flex Fixtures » Three-Point Bend Test Fixtures » Guided-Bend/Weld Bend Test Fixture

Guided-Bend/Weld Bend Test Fixture

General Purpose Flexure Fixtures

  • Guided Bend & Weld
  • Fixtures
Entre em ContatoSolicite Um Catálogo De Acessórios
W-6810
  • W-6810
  • DESCRIÇÃO
  • Specifications
  • Contate-nos

Two types of bend fixtures are available for evaluating the ductility of plate specimens and welded ferrous and non-ferrous materials. The main difference between the two fixtures is in the base, the guided bend test fixture has a fixed span base, while the weld bend test fixture has an adjustable span base.

Both fixtures use plungers or loading struts with a fixed diameter nose for testing a particular specimen thickness. The plungers are attached to the adjustable crosshead using the grip bumper plate or a threaded adapter. 

The base is equipped with a dowel hole in the center so that it can be doweled to the compression table and kept from sliding during a test. This also will maintain the alignment of the plunger in relation to base so that the force is applied in the center of the span. 

The hardened rollers in the base are captured but free to rotate to allow the specimen to slide as the plunger moves between the rollers. The depth of the base will typically allow up to a full 180 degree bend in the specimen.

Principle of Operation

The bending force is applied as the specimen is forced against the plunger, either as the base is raised with the table or as the crosshead moves down depending on the frame being used. The plunger forces the specimen into a 180 degree bend against the rollers on the base.

On the weld bend test fixture, one half of the base can be adjusted to one of four different positions to allow for testing different thickness specimens. A separate plunger or strut is required for each thickness specimen, several struts are available depending on the fixture.

Guided bend fixtures have a fixed span base and a single diameter loading strut or plunger to form a complete assembly. Specimen loading is carried the same as with the weld bend fixture though a separate assembly must be purchased for each specimen thickness.

Application Range

  • Type of Loading: compression bend 
  • Specimen Material: wrought or cast steel, non-ferrous materials 
  • Specimen Types: flat, flat welded

W-6810 | Guided-Bend/Weld Bend Test Fixture

Guided-Bend / Weld Bend Test Fixture, Adjustable Span for "U" bend tests of plane plate or welded flat specimens. 

Fixture consists of a t-slot base with adjustable span supports supported by two tie rods.

Fixture specifications:

  • Span - 0 to 254 mm (10.0 in)
  • Specimen width - up to 76 mm (3.0 in)
  • Support diameter - 38.1 mm (1.5 in) roller
  • Support depth - 135 mm (5.3 in)
  • Maximum Capacity - 100 kN (22,500 lbf)
  • Fixture Capacity

100kN (22,500 lbf) if installed fully supported

If installed with overhang, capacity is rated per below

Capacity = 100kN (22,500 lbf) where x < 125mm (5 in)

Capacity (kN) = 12,600/x when x > 125 mm

Capacity (lbf) = 111,900/x when x > 5 in

Where x = distance from end of machine loading table to lower flexure support

  • Lower connection - 12.7 mm (0.5 in) centering pin
  • Weight: 59 kg (130 lb) not including loading noses
  • Effective height with loading nose - 357 mm (14.06 in) not including specimen thickness.

Fixture meets the following US and International standards:

ASTM A370-07a, ASTM E190-92, ASTM E290-97a, ANSI/AWS B4.0-98, API 1104, API 5L, AS 2205.3.1, ASME IX 2004, JIS Z2248, GOST 14019 (for specimens 19 to 38.1 mm thick), ISO 5173, ISO 7438, EN ISO 15630-1, EN 910.

Notes:

  1. Fixture requires loading noses (sold separately) of appropriate size for material being tested and standard being used.
  2. The bend fixture cannot bend the specimen to a complete 180 degrees due to necessary clearances between the loading nose and supports.

W-6810-A | US Customary Loading Nose Set for Guided/Weld Bend Test Fixture

Includes 0.5, 1.0, 1.5, 2.0 inch diameter loading noses.

  • Loading nose width: 51 mm (2 in)
  • Loading nose height: 171 mm (6.75 in)
  • Attachment: Type R1m (1.0 in holding button)

CAUTION:
Most standards require loading nose diameters of 4 x specimen thickness. However, some standards allow for other diameter loading noses to be specified locally or as agreed between vendor and customer. It is the customer's responsibility to ensure the proper size loading noses are ordered.

Note: Other size loading noses available individually or in sets as special order.

W-6810-B | Loading Nose Set for Guided-Bend/Weld-Bend Test Fixture

Metric Loading Nose Set for Guided Bend / Weld Bend Test Fixture. Includes 12, 16, 20, 24, 32, 40, 48 mm diameter loading noses.

  • Loading nose width: 51 mm (2 in)
  • Loading nose length: 171 mm (6.75 in)
  • Attachment: Type R1m (1.0 in holding button)

CAUTION:
Most standards require loading nose diameters of 4 x specimen thickness. However, some standards allow for other diameter loading noses to be specified locally or as agreed between vendor and customer. It is the customer's responsibility to ensure the proper size loading noses are ordered.

Note: Other size loading noses available individually or in sets as special order.

Anvil Diameter 38.1 mm (1.5 in)
Capacity 100 kN (22,500 lbf)
Lower Fitting 12.7 mm (0.5 in)
Specimen Width up to 76 mm (up to 3.0 in)
Support Span 0-250 mm (0-10 in)
Upper Fitting Refer to W-6810-A/-B

SEU ENDEREÇO DE EMAIL

Insira o seu endereço de email. Os endereços de email precisam conter o símbolo @. Os endereços de email somente podem conter letras, números e os seguintes caracteres especiais: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~ Os endereços de domínio de email somente pode conter letras, números, pontos (.) e hifens (-).

SUA MENSAGEM

750 Character Max Insira a sua mensagem Os endereços de email somente podem conter letras, números e os seguintes caracteres especiais: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~
AVANÇAR Marque para indicar que você é um visitante que está retornando…

BEM-VINDO DE VOLTA!

SUAS INFORMAÇÕES DE CONTATO

Insira o seu primeiro nome. Please use letters and numbers only.
Insira o seu sobrenome. Please use letters and numbers only.
Selecione o seu país
Insira a sua empresa Please use letters and numbers only.
Insira o seu endereço Please use letters and numbers only.
Insira a segunda linha do seu endereço Please use letters and numbers only.
Insira a terceira linha do seu endereço Please use letters and numbers only.
Insira o seu município Please use letters and numbers only.
Insira a sua cidade Please use letters and numbers only.
Insira o seu estado/província
Insira o seu CEP/Código postal. Please use numbers only
Insira o número do telefone. Please use numbers only

Confirme que você concorda com a nossa política de privacidade e cookies para submeter este formulário.

Eu concordo com os termos e condições da Política de Privacidade e Cookies da Instron

Inscreva-se para receber notícias da Instron!
Marque esta caixa para receber emails pertinentes à área comerciais da Instron sobre produtos, eventos próximos e muito mais!

Selecione um opção de inscrição Um ou mais dos campos necessários está em branco, complete o formulário para continuar Um ou mais campos contêm erros de formatação, corrija os erros para continuar. Confirme que você concorda com a nossa política de privacidade e cookies para submeter este formulário.

SELETOR DE REGIÃO

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMAÇÕES DE CONTATO

Rua Quirino Zagonel, 257,
São José dos Pinhais,
PR, CEP 83020-250

Vendas:  (41) 3035-9400

Serviços:  (41) 3035-9400

Geral:  +55 41 3035-9400

LINKS ÚTEIS
  • Sistemas de ensaio
  • Software
  • Acessórios
  • Catálogo
  • Biblioteca
  • Soluções de Ensaios
  • Webinários
  • Estudos de caso
  • Eventos
  • Carreiras
  • Notícias
  • Glossário
Policies / Legal
  • Política de Cookies e Privacidade
  • Termos de uso
  • Controle de exportação
  • Aviso de dados segundo o GDPR
CONECTE-SE CONOSCO
INSCREVA-SE PARA NOSSO BOLETIM DE NOTÍCIAS
ENDEREÇO DE E-MAIL
© 2019 Illinois Tool Works Inc. Todos os direitos reservados.
[email protected]
  • Política de Cookies e Privacidade
  • Termos de uso
  • Controle de exportação
  • Aviso de dados segundo o GDPR
Back
To Top