Threaded End Holders, Non-Standard
W-5102 | One Set of Non-Standard Threaded-End Specimen Holders
One Set (2) Non-Standard Threaded-End Specimen Holders with maximum rated capacity of 267 kN (60,000 lbs.)
Holders are designed for attachment to an alignment assembly with a male adapting thread
Maximum adapting thread and Specimen thread sizes are 1.5 in. (38mm) diameter which must be specified at time or ordering:
- Adapting thread: ______ diameter ______ thread pitch
- Specimen thread: ______ diameter ______ thread pitch
Accessory Diameter | 54.9 mm (2.16 in) |
---|---|
Accessory Length | 89 mm (3.5 in) |
Capacity | 267 kN (60,000 lbf) |
Lower Fitting | Specify up to 1.5 in |
Specimen Diameter | Specify up to 38 mm (Specify up to 1.5 in) |
Specimen Thread Size | Specify up to 38 mm (1.5 in) |
Static or Fatigue Rated | Static |
Temperature Rating | +5 to +40°C (+40 to +100°F) |
Upper Effective Length | 89 mm (3.5 in) |
Upper Fitting | Specify up to 1.5 in |