Manuais
Biblioteca Técnica de Catálogos, Manuais, Especificações e Estudos de Casos
Torsion Add-On Version 3 Operator's Guide
The Torsion Add-on system comprises a compatible electromechanical load frame, e.g. 6800 Series, a secondary motor mounted to the moving crosshead, a torsion controller assembly mounted to the column of the load frame and a suitable biaxial load cell mounted to the base adapter This configuration provides torque to the specimen which allows biaxial testing of specimens.
Manual 2/14/2022 0.6 MB
6800 Dual Column Table Model Operator's Guide
The Operators' Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
Manual 2/14/2022 4.5 MB
2713-002 Self Tightenting 5kN Rubber Grips - Operating and Installation Manual
This guide provides general instructions on how to use your component. This manual also includes specifications for the component as well as drawings.
Manual 8/6/2020 366.1 KB
2701-065 Pneumatic Grip Control - Reference Manual
The 2701 Series Pneumatic Grip Control is a unit that operates pneumatic action grips.This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 8/6/2020 1.4 MB
2701-004 Pneumatic Footswitch - Operator’s Guide
The pneumatic foot switch is designed to provide sequential grip actuation, keeping the operator’s hands free to align the test specimen in the grips. This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 8/6/2020 188.4 KB
2820-035 and 2820-036 Peel Test Fixtures - Equipment Reference
Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 8/6/2020 2.3 MB