แผนผังเว็บไซต์ | Instron

ผลิตภัณฑ์

เครื่องทดสอบ

อุปกรณ์เสริมสำหรับการทดสอบ

Crash Simulation Accessories;
- 2-Piece Sled;
- Camera Outriggers;
- Low Speed Rear Impact Simulation;
- Pitching;
- Quick Clamping System for Test-Setup-Pallets;
- Side and Pole Impact Simulation;
ตู้ควบคุมสภาพแวดล้อม & เตาอุณหภูมิสูง;
- Environmental Chambers;
  - Electropuls Pull Rod Kit 3117-082;
- Custom Thermal Testing;
- Furnaces;
  - Furnace Testing;
  - Furnace Testing;
    - 1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing;
อุปกรณ์จับยึด, ฟิกซ์เจอร์, ปากจับ, พื้นผิวปากจับ, อุปกรณ์เชื่อมต่อและอุปกรณ์ปรับต่อ;
- Compact Tension Fixtures for Fracture Mechanics;
  - Additional Extension Rod 2780-120;
  - Compact Tension Fixtures for 12.5mm Thick Compact Tension Specimens;
  - Compact Tension Fixtures for 25 mm Thick Compact Tension Specimens ;
  - Compact Tension Fixtures for 50mm Wide Compact Tension Specimens ;
- Pneumatic/Hydraulic Power Supplies;
  - Air Compressor, Portable; Line Voltage: 240 VAC;
- อุปกรณ์จับยึดชิ้นงานทดสอบแบบ Mechanical - Wedge Grips;
  - 2742-102 - ±1 kN Mechanical Fatigue Grips;
  - 2742-206;
  - 2742-316;
  - 2743-402;
- Advanced Hydraulic Wedge Action Grips;
  - Fatigue Rated Hydraulic Wedge Grips (+/- 500 kN);
- Mechanical Wedge Lever Action Grips;
  - 150 kN Lever Action Mechanical Wedge Grips;
  - Lever Action, Mechanical Wedge Grips; Capacity: 100 kN;
  - Lever Action, Mechanical Wedge Grips; Capacity: 150 kN;
- Elasticated Fabric;
  - Fabric Loop Grips;
- O Ring Fixtures;
- Hydraulic Wedge Action Grips;
  - Hydraulic Wedge Action Grips 300kN (67,500 lbf);
  - Hydraulic Wedge Action Grips 600kN (135,000 lbf);
  - Hydraulic Wedge Action Grips 1500kN (337,500 lbf);
  - Hydraulic Wedge Action Grips 1000 kN (225,000 lbf);
  - Hydraulic Wedge Action Grips 2000kN (450,000 lbf);
- Pneumatic Wedge Grips;
  - 2742-103 | ±1 kN Pneumatic Fatigue-Rated Wedge Action Grips;
  - 2742-205;
  - 2742-315 ±10 kN ±100 Nm Pneumatic Fatigue Grips;
- Self-Tightening Eccentric Roller Tensile Grips;
- Cord Capstan Tensile Grips;
- Fiber Filament Tensile Grips;
- Hydraulic Side Action Tensile Grips;
- Mechanical Wedge Action Grips;
- Microelectronics Tensile Grips;
  - Micro Pneumatic Grips, Side Action. Rated capacity: 10 N ;
  - Pneumatic Lead Pull Grip. Rated capacity: 500 N ;
- O-Ring Test Fixtures;
- Pneumatic Cord and Yarn Tensile Grips;
  - High Temperature Pneumatic Cord and Yarn Grips;
- Pneumatic Side Action Grips;
- Screw Side Action Tensile Grips;
- TEMP Wire and Cable Tensile Grips;
- Threaded-End and Button-End Grip Bodies and Inserts;
- Webbing Capstan Tensile Grips;
- Pneumatic Wedge Action Grips;
  - Pneumatic Wedge Action Grips; Capacity: 100 kN;
  - Pneumatic Wedge Action Grips; Capacity: 200 kN;
- Torsion and Axial-Torsion Grips;
  - Axial-Torsion Wedge Grips;
    - 25kN / 100Nm Fatigue Rated Hydraulic Wedge Action Grips for 8874 Machine;
  - Chuck Style;
    - 0.375 in Keyless Drill-Type Chuck Assembly;
    - 0.375 in Keyed Drill-Type Chuck Assembly;
  - Collet Style;
    - Small Collet Grip Assembly, Range 0.8 - 6.3 mm (0.03125 - 0.25 in);
    - Large Collet Grip Assembly, Range 6.3 - 14.25 mm (0.25 in - 0.5625 in) ;
  - Socket Style;
    - 0.5 in Socket Drive Torsion Grips, English;
    - 0.5 in Socket Drive Torsion Grips, Metric;
- Wire and Cable;
  - Pneumatic Wire Tire Cord Grips;
  - Pneumatic Cord and Yarn Grips. Grooved, 5 kN;
  - Pneumatic Wire Tire Cord Grips. Surfalloy, 5 kN;
  - Pneumatic Wire Tire Cord Grips (10 kN);
  - SG-1 Wire Snubbing Grips;
  - SG-2 Cable Snubbing Grips;
  - Pneumatic Action Tire Cord Grips. 10 kN;
Load Cells;
- Static Load Cells;
- Torsion Cells;
- Dynamic Fatigue;
  - 2527 Series Bi-axial Dynacell;
  - 2527 Series Dynacell;
Frame Accessories;
- Electromechanical Frame Accessories;
  - Ethernet Frame Interface;
  - Digital Controller Accessories;
- 8800 Series Servohydraulic Test Systems;
- Air Kits for Pneumatic Grips;
  - Smart-Close Air Kit;
- Debris Shields;
- Electropuls All-Electric Dynamic Test Systems ;
- Impact Testing System Accessories;
- Loadframe Support Tables/Bases;
  - Support Table, Heavy Duty; For use with all Dual Column Table Top Models;
  - Base/Extension for Floor Models 4400, 5800 and 5900;
- Static Hydraulic Universal Testing System Frame Accessories;
  - In-Head Wedge Grip Jaws;
  - T-Slotted Tables;
- Hydraulic Grip Pump;
Specimen Measuring and Preparation;
- Specimen Preparation Systems;
  - Specimen Preparation Notching Machines;
  - Specimen Preparation Punching Machines;
- Specimen Marking Punches;
- Specimen Measurement Devices;
Alignment Fixtures;
Application Specific Fixtures;
- Food;
- Paper and board;
  - TAPPI T541 Internal Bond Strength of Paperboard. Z-Direction Tensile.;
- Wood;
Electric Vehicle Battery Testing Accessories;
Biomedical Systems and Accessories;
Composite Test Fixtures;
- Composite Tensile Grip Guide;
Compression Platens;
- Self-Aligning / Spherically Seated Compression Platens;
Couplings and Adapters;
Custom Accessories;
- Custom Fixtures;
- Grips & Platens;
Electronics and Microelectronics Testing Systems and Accessories;
- Miniature Variable Angle Peel Fixture;
- Stepped Jaw Vice Clamp, Capacity: 500 N (100 lb, 50 kgf);
- Translation and Clamping Stages;
Extensometers;
- Averaging Clip-on Extensometer;
  - Averaging Extensometer;
  - Averaging Extensometer;
- Axial Clip-on;
  - Dynamic;
- AutoX750 Automatic Contacting Extensometer;
- Biaxial Clip-on;
- Calibrators for Extensometers;
  - Extensometer Digital Calibrator 0.1 micron resolution;
  - Extensometer Digital Calibrator 1.0 micron resolution;
- Compression Deflectometers (LVDT);
- Crack Opening Displacement (COD) gauges;
  - Crack Opening Displacement (COD) Gauge 5/2;
  - Crack Opening Displacement (COD) Gauge 10/4;
- High-Temperature Extensometers;
- Long Travel Extensometer;
- AVE 2 Non-Contacting Video Extensometer;
  - AVE 2 Dynamic | Low Force Applications;
  - AVE 2 Dynamic | High Force Applications;
- Static Axial Clip-On Extensometer;
- Transverse Clip-on Extensometers;
Fastener Fixtures;
- Fastener Holders;
- Fastener Shear Fixtures;
Flex Fixtures;
- ฟิกซ์เจอร์ทดสอบแรงดัดงอแบบสามจุดและสี่จุด;
- Three-Point Bend Test Fixtures;
  - Guided-Bend/Weld Bend Test Fixture; specimen width to 76 mm (3.0 in) ;
  - Cold Bend Testing Fixture for Steel Reinforcement Bar;
Peel, Friction, and Puncture Test Fixtures;
- Puncture Test for Packaging Materials ;
- Puncture Fixture per ASTM D5748, D4649;
Test Plates;
- Component Test Plate;
- T-Slot Tables;
Accessories for Materials Testing Catalog - Eighth Edition;
- Request a Catalog;

โปรแกรมทดสอบวัสดุ

การบริการและการสนับสนุน

บริการระดับมืออาชีพของบริษัทอินสตรอน

การฝึกอบรม

คำถามที่พบบ่อย;

Resources

โซลูชันการทดสอบ

ASTM

ISO

อื่น ๆ

โซลูชั่นอุตสาหกรรม

Aerospace

Automotive

การทดสอบทางชีวการแพทย์

Composites Testing

Frequently Asked Questions;

Construction and Building Materials Testing

Electric Vehicle Battery Testing

Electronics and Microelectronics

Metals Testing

การทดสอบพลาสติก

ทรัพยากร

บล็อก

กรณีศึกษา

คำศัพท์เกี่ยวกับการทดสอบวัสดุ

วิธี

งานเขียน

ข่าว

เครื่องคำนวณการจ้างงานภายนอก

ประเภทการทดสอบ

Videos

สัมมนาออนไลน์

บริษัทของเรา

เกี่ยวกับเรา

Careers

Field Service Representative Opening in Greater Toronto, ON;

ติดต่อเรา

สมัครสมาชิกเพื่อรับจดหมายข่าว;

ย้อนกลับ
ขึ้นด้านบน