Debris Shield for Floor Mounted Testing Machines
2910-062 | Debris Shield for Floor Mounted Testing Machines
Consists of a clear 4.5 mm (0.18 in) thick, high impact strength polycarbonate panel in an Aluminium frame with adjustable working height. Mounts to column cover t-slots, on either the front or rear of frame. Height: 915 mm (36 in).
Compatible with Instron interlock kits.
For use with Models 4481, 5581, 5881, 3382, 4482, 5582, 5882, 5982, 3384, 4484, 5584, 5884, 5984, 4485, 5585, 5885, 5985, 3385H, 5585H, 5885H and 5985 load frames.
Distance from center line of test system to the shield: 168 mm (6.6 in).
IMPORTANT NOTE: This item is designed to prevent the ejection of non-projectile specimen debris from the test area. It is not designed to stop projectile material. It is not designed to protect persons against hazards generated by moving parts. It is not a guard or protective device as described by the Machinery Directive 2006/42/EC, and in ordering this item you accept this statement. Guards or protective devices are available if your risk assessment identifies that persons should be protected against hazards generated by moving parts or by your application of the test machine. We draw your attention to the General Product Safety Statement in this quotation.
*Not for use with AVE/SVE
|Accessory Height||915 mm (36 in)|
|Accessory Width||749 mm (29.5 in)|
|相容主機型號||Models 4481, 5581, 5881, 3382, 4482, 5582, 5882, 5982, 3384, 4484, 5584, 5884, 5984, 4485, 5585, 58|
Test space enclosures or protective shields are sometimes a necessary safety accessory depending on the type of specimen being tested.
- 0.7 MB