ASTM A370 鋼筋的拉伸測試與彎曲測試
此裝載框架安裝了一個底部有裝載面積的上置液壓促動器，這大大降低了我們必須將重型鋼筋試片抬起裝載的要求，另外，因為增加了壓縮轉接器到拉伸夾置具上，我們便可以進行鋼筋試片的拉伸和抗彎測試，節省了不少轉換的時間，因為我們不需要使用起重機去移動又大又重的拉伸夾置具，增加此壓縮轉接頭和抗彎夾置具只需要幾分鐘的時間且簡單鎖緊幾個螺絲。
為了此拉伸測試我們使用了油壓式楔型夾置具，因為初始的鎖模力可以減少夾置具在鋼筋粗糙表面的滑移現象，此 油壓式楔型夾置具可以夾持鋼筋直徑尺寸為10 mm (0.39 in)至70 mm (2.75 in)，夾置具為有一個可以容納鋼筋橫樑凹槽的V型夾置具。
最後我們使用一個自動的應變計來量取應變值，我們所選擇的型號為M300B，其可調整的標距長度為10 mm至300 mm(此要求為大多數的鋼筋所應用)，在測試開始時可以自動的夾住鋼筋的橫樑表面且在測試期間在特定的點鬆開，此應變數據可以用在彈性模數和降伏強度的計算。
AutoX750 Automatic Contacting Extensometer
The AutoX750 is a high-resolution, long-travel automatic contacting extensometer that is used to determine a variety of calculations including modulus, offset yield, plastic elongation to failure (non-proportional), and r and n values for sheet metals.
- Products
- 8/15/2013
- 1.3 MB
Hydraulic Side-Acting Grips: DuraSync™
Instron® hydraulic side-acting grips are an innovative solution for high capacity testing and deliver enhanced gripping performance, usability and operator safety over traditional grip designs. These grips maintain a constant clamping force on the specimen that acts perpendicular to the direction of testing and is independent of tensile loading.
- Products
- 3/15/2013
- 1.1 MB
Hydraulic Wedge-Action Grips
Instron® hydraulic wedge grips provide an innovative solution for high capacity testing and deliver enhanced gripping performance, usability, and operator safety.
- Products
- 11/11/2011
- 1.0 MB
Industrial Series KPX Models
Industrial Series KPX Models are designed for high-capacity tension, compression, bend/flex, and shear testing. Featuring an ultra-large single test space and adjustable crosshead options, these frames deliver exceptional flexibility for a wide range of testing applications and are available in capacities ranging from 600 kN (135,000 lbf) to 3,500 kN (800,000 lbf).
- Products
- 1/20/2017
- 421.5 KB
Industrial Series HVL Models
Instron® Industrial Series HVL Models are designed for high-capacity tension, compression, bend/flex, and shear testing. Featuring a dual test space and long test stroke, these frames are available in 2000 kN (450,000 lbf) capacities. Understanding the critical importance of operator safety, Instron’s HVL Models incorporate high-quality materials, components, and craftsmanship.
- Products
- 1/20/2017
- 362.1 KB
Industrial Series LX Models
Featuring a large, single test space and single footprint, LX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.
- Products
- 11/20/2017
- 491.4 KB
Industrial Series DX Models
Featuring a dual test space and single footprint, DX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.
- Products
- 9/7/2017
- 0.6 MB
Industrial Series Brochure
The trend toward high-strength, lightweight materials for the aerospace, energy, construction, and transportation industries requires materials testing systems to be durable, yet maintain precise control while generating critical test data. Software user interfaces must be easy to use, yet flexible enough to meet the increasing demands of the testing world. The Industrial Series delivers exceptional performance packaged in reliable, innovative system designs that offer superior accuracy and repeatability, improved safety, and an overall enhanced user experience.
- Products
- 11/7/2017
- 2.6 MB