Simulating a Spring with the ElectroPuls

Simulating a Spring with the ElectroPuls Sarah Jastram As the number of patients seeking “in-home” medical care grows larger, medical device companies find themselves catering to an increasing demand for […]

Upper Yield Calculations—Discontinuous Yielding/YPE Material

Upper Yield Calculations-Discontinuous Yielding/YPE Material David Fry Following a recent lab visit, I thought it was worth writing a quick post to share an example of how labs sometimes incorrectly […]

What Does Load Measurement Accuracy of 0.5% of Reading Down to 1/100th, 1/500th, 1/1000th of a Load Cell’s Capacity Imply?

What Does Load Measurement Accuracy of 0.5% of Reading Down to 1/100th, 1/500th, 1/1000th of a Load Cell’s Capacity Imply? Janice Tan First of all, there are two important pieces […]

Industry Insights Series with David Fry

Industry Insights Series with David Fry David Fry Working alongside our friends at AZOM, they developed a series of engaging interviews with a few of our global colleagues. In the […]

Equipment Considerations for a Well-aligned Test

Equipment Considerations for a Well-aligned Test Leonardo Martinez When testing stiff or brittle materials, such as composites, alignment is crucial-even instances of slight misalignment can throw off test results. Misalignment […]

Question from a Customer- Bagley Correction

Question from a Customer- Bagley Correction Shalmalee Vaidya Question: Can we compare viscosity results between polymers tested at the same temperature and identical shear rates but on two different capillary […]

A New Long-Term Bypass Solution

A New Long-Term Bypass Solution Today, heart disease is so common that it’s a fair statement to make that you or someone you know has been affected by this illness. […]

Google for Test Results

There are many situations where we need to analyze test results, not just from one sample file, but results that are spread across different sample files that were tested at different times with slight differences in setup or calculations.

Question from a Customer

Question from a Customer Q: Do you have the necessary equipment and expertise to adjust and verify Instron equipment to accuracy levels demanded by national and international standards such as […]