Curved Needle Test Systems
The Instron® Curved Needle Testing System is ideally suited for testing needles used in wound closure or surgical procedures. This system provides a platform for two different needle testing solutions: one for curved needle puncture testing to ASTM F3014 and the other for cantilever bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and coating durability, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal bench-top space. The testing system operates with Bluehill® Universal software that provides test control, data acquisition, test results, and reports, as well as a large library of calculations.
Specifications:
- Maximum Angular Displacement: 140°
- Angular Displacement Resolution: 0.015°
- Minimum Angular Velocity: 0.06 °/sec
- Maximum Angular Velocity: 100 °/sec
- Needle Size: R2.44 – R32.3 (radius)
- Needle Gauge: 0.44 – 1.13 mm
- Electrical Requirements: Single Phase, 47/63 Hz, 120 or 220 VAC
- Operating Temperature: +10 to 38°C or +50 to 150°F
- Software: Bluehill Universal
Curved Needle Testing Systems
The Instron® Needle Testing System is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal benchtop space. The testing system operates with Instron Bluehill® 3 Software that provides test control, data acquisition,test results, and reports, as well as a large library of calculations.
- 제품소개
- 03/18/2022
- 493.73 KB
Bluehill Universal 브로슈어
Bluehill Universal은 직관적인 터치 상호 작용과 간소화된 워크플로우를 위해 설계된 Instron의 고급 재료 시험 소프트웨어입니다. 이 소프트웨어는 사전 로드된 시험 방법, 빠른 설정을 위한 QuickTest, 향상된 데이터 내보내기, 그리고 직접적인 서비스 통신을 위한 Instron Connect를 제공합니다. Bluehill 2 및 Bluehill 3 사용자들은 향상된 성능과 사용 편의성을 위해 최신 버전으로 쉽게 업그레이드할 수 있습니다.
- 제품소개
- 02/26/2017
- 4.61 MB
