문헌
브로셔,매뉴얼,백서 및 사례 연구를 위한 문헌 라이브러리
Manual Wedge Action Grips 2716-00x and 2736-00x Series
The manual wedge action grip is designed for easy specimen loading, alignment, and positioning. After initial face to specimen contact, gripping force will increase as the testing load increases. Virtually no preload is seen during specimen clamping due to the design of the moving grip bodies. This makes them particularly suitable for testing high strength materials, such as metals and composites, ensuring that specimen slippage is eliminated.
제품소개 03/08/2022 1.06 MB
6800 Series Multi Station Systems
The Instron 6800 Series Multi Station System offers enhanced throughput with its ability to perform simultaneous, independent tests on up to five separate specimens using a single load frame.
제품소개 02/18/2022 790.79 KB
AVE2 Dynamic Strain Measurement
In addition to its excellent performance for static testing, the Instron AVE 2 is now available with an option for cyclic testing and high speed monotonic test measurement. Capable of tracking displacement at up to 500mm/s with cyclic test frequencies up to 20Hz, it offers the speed and flexibility scientists and engineers have been waiting for to study the dynamic behaviour of materials without contacting the specimen.
제품소개 02/10/2022 2.66 MB
V-Notch Shear Fixtures | ASTM D5379 & D7078
Instron® Shear Test Fixtures are designed for in-plane or interlaminar shear testing of composite materials. The V-Notched Beam Method, more commonly known as the Iosipescu Shear Method, is described in ASTM D5379, while the V-Notched Rail Shear Method is outlined in ASTM D7078. Both test methods share many common characteristics and have the distinctive V-notches in the specimen design, which serve to create a localized and approximate uniform shear stress zone between the notches. Also, a ±45° two-element strain gauge is often used to directly verify the shear strains applied.
제품소개 02/01/2022 517.15 KB
2713 Series Self-Tightening Roller Grips
The self-tightening roller grips are primarily designed for the precision testing of elastomeric and other flexible materials exhibiting a large reduction in cross-section area under load. They provide excellent testing accuracy, positive non-slip gripping action, and are quick and simple to use.
제품소개 02/01/2022 195.97 KB
Manual Wedge Action Grips Data Sheet | Catalog No. 2716-01X-02x and 2736-01x
These versatile manual wedge action grips are equipped with moving grip bodies which allows them to be tightened onto a specimen without altering the vertical position of the faces in relation to the specimen.
제품소개 01/11/2022 597.22 KB
Webbing Capstan Grips | 2715-003
Webbing capstan grips are designed to permit faster, easier testing of seat belts and other high-strength belts and tapes. These grips are designed to permit predetermination of specimen length and allow quick, convenient loading.
제품소개 12/21/2021 354.41 KB
2850 Series T-Slot Tables Data Sheet
The T-slot table (catalog no. 2850-202, -203, -205, -206, CP103964) provides an extended work area primarily intended for clamping components or structures for performing tensile, compression or flexural tests.
제품소개 12/08/2021 920.58 KB
Does Your Notch Quality have an Adverse Effect on your Data Reliability?
The Instron® Motorized Notcher allows an operator to create notched specimens accurately, quickly, and safely.
제품소개 10/15/2021 520.76 KB
Does Your Specimen Quality have an Adverse Effect on Your Data Reliability?
The Instron® Hollow Die Punch system is a tool used to create dog bone shaped specimens easily, quickly, and safely. An ideal choice over the “manual” punching of specimens, the system is powered by compressed air and creates a tensile specimen that is free of tool marks, incipient cracks, induced stresses, internal deformation, and heat distortion in or on the specimen.
제품소개 10/15/2021 6.33 MB