Torsion grips are designed to transmit torsional forces to the specimen and usually employ either a collet or socket-style gripping arrangement. Whereas, axial torsional grips are used in conjunction with systems able to apply both torsional and axial loads to a specimen simultaneously.
Axial-Torsion Wedge Grips
These grips utilize a wedge-action gripping technique making them suitable for flat specimens as well as cylindrical.
Chuck Style
These universal drill-type chuck grips can be used to hold round, hex or triangular specimens. The standard sets are available in both a keyless and keyed style that can hold a range of specimen sizes.
Collet Style
Two standard sets of Collet Style grips are available: a small collet grip set for smaller specimens and a large collet grip set for larger specimens. Both sets are double angle style.
Socket Style
These socket style adapters allow the connection of any 0.5 inch drive socket or accessory directly to the torque cell and/or output shaft on the MT series frames.
The Custom Solutions group at Instron® has been developing uncommon fixtures, grips and platens to meet our clients' special requirements for over 30 years. Please select a link below to see some of our recent projects.
Instron 爐體及相關配件專為萬能與疲勞試驗系統使用而設計。標準配置支援萬能系統在空氣中進行最高 1200°C 的測試，疲勞系統最高 1000°C，並提供 工程化解決方案 以因應客製高度、寬度及更高溫度需求。
Frame accessories designed for use with Instron Industrial Series static hydraulic universal testing machines.
In-Head Wedge Grip Jaws
In-head wedge grip jaws fit directly into the crosshead pocket of the load frame and provide a grip that is adaptable for testing flat, round, and cable specimens in compliance with ASTM E8.
T-Slotted Tables
T-slotted tables offer a versatile means of securing fixtures to test odd specimen geometries in the compression space of DX model static hydraulic universal testing systems.
適用於低速後方、側面和立柱衝擊模擬的配件，有助於提高開發過程的生產力和效率。
正確的製備、精確的測量以及可靠的試片標記，對於準確的材料特性分析至關重要。
