Air Cushion Isolators (for frames 3 & 4). Not suitable for 8801 or 8516 (1 Set)
Suitable for testing frequencies above 15Hz.
| Compatible Frame Models | Air Cushion Isolators (for frames 3 & 4). Not suitable for 8801 or 8516 Suitable for testing frequ |
For mounting ElectroPuls table-top systems when used for low to medium acceleration dynamic tests (accelerations below 6g)
Robust design with high stiffness grey frame and light-grey scratch-resistant table-top
Pre-drilled with mounting holes to suit E1000 or E3000 systems
| Model | Height | Width | Depth | Weight | ||||
|---|---|---|---|---|---|---|---|---|
| mm | in | mm | in | mm | in | kg | lb | |
| 1300-311 | 785 | 31 | 1000 | 39 | 750 | 30 | 56 | 123 |
| 1300-315 | 800 | 32 | 1000 | 39 | 750 | 30 | 65 | 143 |
High-Stiffness Support Table for ElectroPuls E1000 and E3000 tabletop test instruments.
Dynamic Extensometer for direct strain measurement and closed loop strain control. Suitable for tensile, compressive & fatigue testing, the extensometer has a 12.5mm gauge length with a travel of ±5mm giving ±40% strain.
It includes a 12.5mm extender to give a gauge length of 25mm and ±20% strain and a 37.5mm extender to give a gauge length of 50mm and strain of ±10%.
Temperature range: -80C to +200C. Compatible with 8800 and 8500Plus controllers. May be immersed in acetone, silicone or alcohol.
Wide operating temperature range, from -80 °C to 200 °C (-112 °F to 392 °F)
Designed to meet the requirements of ISO 9513, BS 3846 and ASTM E 83
This guide provides instructions on how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.
Fracture Mechanics Fixtures for 50 mm wide compact tension specimen.
Rated capacity: ±250kN Dynamic, 500 kN Static
Requires: fatigue rated adapters. Mechanical interface M48 x 2 right hand female thread.
(1 Pair)
Supports closed-loop control and data acquisition for only one transducer (strain gage bridge, LVDT, or +/-10V BNC input).
Includes:
Note: Not recommended for customer installation to an existing tower. Always include service time when quoting as an accessory
Per MIL-STD-3010
Simple puncture fixture with clearly specified dimensions.
Upper fitting: Type O (12 mm connection with 6 mm clevis pin)
Lower fitting: Type D (1.25 in connection with 1/2 in clevis pin)
| Accessory Height | 356 mm (14 in) |
| Accessory Width | 125 mm (5 in) |
| Capacity | 2.5 kN (500 lbf) |
| Lower Fitting | 1/2 inch Clevis Pin (Type Dm) |
| Temperature Rating | +10 to +40 °C (+50 to +100 °F) |
| Testing Standards | MIL-STD-3010 |
| Upper Fitting | 6 mm Clevis Pin (Type Om) |
Rated Capacity: ±50kN Dynamic, 100kN Static
Temperature Range: -50 to 315°C
Overall accessory length 400mm
Includes:
Capacity 2000kN
(450,000 lbf, 200,000 kgf)
Specimen ranges:
Grips are supplied with:
Grips interfaced to the machine’s hydraulic power supply when ordered with a new hydraulic UTM. (Consult factory for interfacing of grips to an existing machine or for systems where an independent hydraulic power supply is required)
Efective grip heights:
Upper grip: 715 mm (28.125 in.)
Lower Grip: 770 mm (30.3125 in.)
Capacity: 1 kN
Dimensions: 2 , 4, 6, 8, and 10 mm (0.08, 0.16, 0.24, 0.31,
and 0.39 in) diameter ball.
The 2 mm probe is 80 mm (3.15 in) long
All others are 150 mm (5.9 in) long.
Requires 3-Jaw chuck 2830-036
Flat-end puncture probes produce a shear stress in the specimen. The force required to cause shearing as the probe penetrates the specimen relates to texture properties such as firmness and hardness.
平均式延伸計 25 mm 軸向標距長度，提供單一平均軸向輸出。
特點：
此延伸計提供單一平均軸向輸出。它具有電子校準功能，並且可以自我識別，適用於 3300、3400、4200、4300、4400、4500、5500、5800、5900、6800、8500、8800 Tower 和 8800MT 系列系統。
50 mm 軸向標距雙軸延伸計，提供一組平均軸向和一組橫向應變測量。
特點：
橫向位移 +/-0.5（應變範圍取決於試樣寬度）
該延伸計提供單一平均軸向輸出與單一橫向輸出，且需要 2 個感測器通道。其具備電氣校準功能，並可自動識別 3300、3400、4200、4300、4400、4500、5500、5800、5900、6800、8500、8800 Tower 及 8800MT 系列系統。
Capacity: 200 kN (40,000 lb, 20,000 kg)
Upper and lower fittings: Type llm (M48 X 2 LH)
Maximum specimen thickness: 40 mm (flat)
Maximum specimen width: 75 mm (flat)
Maximum specimen diameter: 50 mm (round)
Clamping length: 70 mm.
Temperature range: ambient only
Requires faces
Includes an air distribution kit with both, 1/4 NPTM (7/16-20), and 1/4 inch hose barb end connections
An Automatic Air Control Kit or Footswitch is recommended
The Pneumatic Wedge Action Grips, available in 100 or 200 kN, provide a convenient method of clamping both large round and flat specimen shapes, up to a 50 mm (2 in) diameter, or flat specimens up to 40 mm (1.57 in) thick respectively. V-face grips are used for round specimens by design and have a reduced area at the center that compromises their ability to absorb high-energy breaks without fracture. This grip uses a split V-face configuration that allows the break energy to be dissipated without damaging the faces.
